Edelbrock 66162 - Manual
Edelbrock 66162 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Catalog #66162, #66163
©2006 Edelbrock Corporation
Page 1 of 2
Brochure #63-66162
Rev. 5/06 - DA/mc
®
TUBULAR EXHAUST SYSTEM
For 1993-1994 Chevrolet/GMC Pick-Up, Blazer, Suburban
1500/2500 Series, 2 & 4 WD, Auto & Standard Transmission
with 5.0L/5.7L V8 T.B.I. without A.I.R.
Catalog #66162, #66163
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new
Tubular Exhaust System (TES). If you have any questions, please
contact our
Technical Hotline at : 1-800-416-8628
from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at
. Please fill out and mail your warranty card.
TUBULAR EXHAUST SYSTEM:
These components are designed to improve the exhaust efficiency of the GM T.B.I. (Throttle Body
Injection) V8 engine. A performance gain can be expected by the installation of the system. This system does require welding for
installation and retains all O.E.M. emissions equipment.
Suggested Tools Needed for Installation:
This vehicle has some metric fasteners.
❑
Mig welder (recommended) or gas welder—Professional welding is highly recommended.
❑
3/8” ratchet socket set with extensions and universal 13mm and 15mm swivel sockets.
❑
Combination set of open-end wrenches.
❑
Hacksaw.
❑
Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑
Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)
NOTE:
Some models will require a special power steering pulley puller, K-D 2897 or equivalent.
SPECIAL NOTICE:
This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the California Air
Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment certification, we
have included a silver fan shroud decal to help testing personnel verify the this part is a legal replacement on the vehicle for which
it is cataloged. The adhesive-backed decal should be affixed next to the existing emission and engine specifications decal. Do not
cover any part of your original emission decal.
WARNING:
The use of "Thermal Wrap" or any aftermarket coating process
will void the warranty
on your Edelbrock Tubular
Exhaust Systems. Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the system.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in
poor performance and engine or vehicle damage.
Qty.
PN
Description
❑
1
25-9317
Header left side (#66162)
❑
1
25-9318
Header right side (#66162)
❑
1
25-9130
Header left side (#66163)
❑
1
25-9131
Header right side (#66163)
❑
1
25-9639
Extension pipe right side
❑
1
25-9638
Extension pipe left side
❑
12
36-0710
Hex header bolts; 3/8” 16 x 1
❑
2
36-6438
Ferry bolts: 3/8” x 2-3/4”
❑
1
46-1060
Flange connector
Qty.
PN
Description
❑
1
52-8097
O2 Sensor plug
❑
1
68-1330
Hex cap screw 1/4” x 1
❑
4
68-8550
Hex cap screw 3/8” x 2”
❑
1
25-9604
Spacer tube; 3/8” O.D. x 1/2” Long
❑
2
25-9605
Spacer tube; 5/8” O.D. x 1-1/2” Long
❑
16
82-5590
Lock washers; 3/8”
❑
2
54-0262
Gasket manifold port
❑
2
54-0414
Donut gaskets 2-1/4”
❑
1
46-5183
U-clamp; 2-1/4”
KIT CONTENTS
Catalog #66162 (Ceramic-Coated), #66163 (Ti-Tech Coated)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
