Edelbrock 5205 - Manual
Edelbrock 5205 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
©
2006 Edelbrock Corporation
Rev. 9/06 - DA/mc
Catalog #5204 & #5205
Brochure #63-5204
Page 1 of 2
Edelbrock Lower Trailing Arms
Vehicle Applications: See Below
Catalog #5204 & #5205
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Trailing Arms. If you have any questions, contact our
Technical Hotline at: 1-800-416-8628
, 7 am to 5 pm, Monday-Friday, Pacific Standard Time or e-mail us at
.
Vehicle Applications:
Catalog #5204
- 1982-2002 Camaro/Firebird & 1978-1988 GM A/G-Body
Catalog #5205
- 1964-1972 GM A/G-Body
Tools and Supplies Required:
❑
Floorjack
❑
18mm socket and combination wrench (3/4” for #5205 only)
❑
Jackstands
❑
Torque wrench
❑
Tire chocks
❑
Blue Loctite™
❑
Lug wrench
❑
Grease gun
NOTE:
Edelbrock Trailing Arm hardware kits are available - Hardware Kit #5215 fits 5201 & 5204; #5217 fits #5205
(Optional - stock hardware may be re-used if in satisfactory condition).
REMOVAL OF STOCK TRAILING ARMS
1. Place car on level surface and place tire chocks in front of and behind front tires
(Fig. 1).
2. Support rear of the car on jack stands and remove the rear wheels.
3. Place a floor jack under the differential and lift up slightly to remove tension from the trailing arm bolts - make sure
not to lift the car off the jackstands
(Fig. 2).
KEEP FLOOR JACK UNDER CAR DURING THE COMPLETE REMOVAL AND INSTALLATION PROCEDURE
CAUTION - DO NOT REMOVE BOTH TRAILING ARMS AT THE SAME TIME OR THE AXLE WILL ROTATE AND THE
TRAILING ARM INSTALLATION WILL BE MUCH MORE DIFFICULT.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
result in poor performance and engine or vehicle damage.
Fig. 1
Fig. 2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
