Edelbrock 1997 - Manual
Edelbrock 1997 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
• Please
study these instructions carefully before installing your
new Throttle Kicker kit. If you have any questions or problems, do
not hesitate to contact our
Technical Hotline at: (800) 416-
8628
from 7:00 am to 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at:
.
• APPLICATIONS
Edelbrock Throttle Kicker Bracket #1997 is an adapter to connect a
factory vacuum operated throttle kicker to Edelbrock Q-Jet
carburetor #1903. This applies to 1980-1985 350, 400 and 454
c.i.d. engines in 3/4 and one-ton trucks with heavy duty chassis
and hot air choke. If original equipment carburetor has factory
cruise control, use the original stud and nut instead of included
hardware. Figure 1 shows typical installation on Q-Jet carburetor
#1903.
• INSTALLATION
Install bracket over carburetor throttle arm stud as shown in
Figure 1. Use bolt, nut and washer supplied to attach.
THROTTLE KICKER BRACKET
Catalog #1997
for Edelbrock Performer Series Q-Jet
Carburetor #1903
Figure 1
Throttle Kicker Bracket installed on Edelbrock
Performer Q-Jet carburetor #1903 viewed from left
(driver's) side.
• Please
study these instructions carefully before installing your
new Throttle Kicker kit. If you have any questions or problems, do
not hesitate to contact our
Technical Hotline at: (800) 416-
8628
from 7:00 am to 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at:
.
• APPLICATIONS
Edelbrock Throttle Kicker Bracket #1997 is an adapter to connect a
factory vacuum operated throttle kicker to Edelbrock Q-Jet
carburetor #1903. This applies to 1980-1985 350, 400 and 454
c.i.d. engines in 3/4 and one-ton trucks with heavy duty chassis
and hot air choke. If original equipment carburetor has factory
cruise control, use the original stud and nut instead of included
hardware. Figure 1 shows typical installation on Q-Jet carburetor
#1903.
• INSTALLATION
Install bracket over carburetor throttle arm stud as shown in
Figure 1. Use bolt, nut and washer supplied to attach.
THROTTLE KICKER BRACKET
Catalog #1997
for Edelbrock Performer Series Q-Jet
Carburetor #1903
Figure 1
Throttle Kicker Bracket installed on Edelbrock
Performer Q-Jet carburetor #1903 viewed from left
(driver's) side.
©2002 Edelbrock Corporation
Brochure No. 63-0123
©2002 Edelbrock Corporation
Brochure No. 63-0123
Rev. 7/02
Rev. 7/02
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
