Edelbrock 15005 - Manual
Edelbrock 15005 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
©2004 Edelbrock Corporation
Rev. 1/04 - RS/mc
Catalog #15005
Brochure #63-0245
INTAKE MANIFOLD GASKET
(For Honda D16Y8 Engines)
Catalog #15005
INSTALLATION INSTRUCTIONS
®
PLEASE
study these instructions carefully before installing your new Edelbrock Intake Manifold Gasket. If you have any
questions or problems, do not hesitate to contact our
Technical Hotline at: 1-800-416-8628,
from 7am-5pm, Monday-
Friday, Pacific Standard Time or via e-mail at:
. Please fill out and mail your warranty card.
Installation Procedure
KIT CONTENTS
Qty.
Description
1
Intake Manifold Gasket
•
Description:
This is a replacement intake manifold gasket, which is supplied in the catalog #1500 turbo kit, as well as
the intake manifold kits, #4754 & #4756.
Edelbrock Corporation
2700 California St.
Torrance, CA 90503
Tech Line: 1-800-416-8628
Office: (310) 781-2222
E-Mail: [email protected]
1. Remove the intake manifold as shown in your instructions for part #1500, #4754, or #4756.
2. Clean all gasket mating surfaces. Stuff paper towels into the open intake ports before cleaning to prevent any debris from
entering the engine.
3. Re-install the intake manifold as shown in the #1500 or #4756 instructions, using the new gasket. If your vehicle was not
equipped with air injection, trim the top edge of the gasket
(See. Fig. 1)
.
4. Torque all intake manifold bolts to 17 ft/lbs., following the sequence below
(See Fig. 2)
.
1
7
4
3
5
2
Torque all bolts to 17 ft./lbs
6
Fig. 2
Fig. 1
Cut along dashed lines
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
