EAW MW12 - Manual
The EAW MicroWedge MW12 is a high-performance two-way full-range stage monitor designed for professional audio applications, covering its engineering specifications, acoustic performance, and physical construction. This manual highlights the product’s technical attributes–such as frequency response, impedance, and directional sound dispersion–through detailed measurements, polar plots, and dimensional diagrams. It also addresses key operational requirements, including amplifier compatibility and enclosure design details like material composition and tolerances. The focus remains on its acoustic engineering, durability, and suitability for stage monitoring environments.
Table of Contents:
- Page 1 – Product Specifications and Features
- Page 2 – Enclosure Dimensions and Construction Details
- Page 3 – Frequency Response and Performance Graphs
- Page 4 – Horizontal Polar Response Data
- Page 5 – Vertical Polar Response Data
- Page 6 – Input Configuration and System Metrics
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
Part Number: 0011736-90 February 2008
M i c r o W e d g e M W 1 2 S p e c i f i c a t i o n s
group · S
FEATURES
•
Highly coherent coaxial design (12-inch LF)
•
Enhanced fidelity and power handling
•
Upgraded transducers and crossover design
•
Switchable single-amp/bi-amp modes
•
Convenient input connector location
DESCRIPTION
The MicroWedge MW12 is a collaboration between original
MicroWedge Series inventor Dave “Rat” Levine (owner of Rat Sound
Systems, Inc.) and the EAW Engineering Department, resulting
in dramatically upgraded performance and ergonomics. A 12-inch
woofer is paired with a 3-inch voice coil HF compression driver on a
horn that provides full yet controlled 90-degree horizontal dispersion.
All frequencies emanate from the exact same point, eliminating
crossover region problems and time/phase irregularities, as well as
optimizing coherency. The coaxial approach also contributes to a
very compact, low-profile footprint.
MicroWedge MW12 monitors are processor enhanced (rather
than processor dependant) for true “plug and play” operation. User
selectable single-amp and bi-amp modes are provided. The large
port on the front of the cabinet enhances LF response in coupling
with the floor, and this port houses both the carrying handle and
the passive/active mode switch. The port also contains dual input
connectors, keeping them concealed and protected, and allowing
wedges to be placed as close together as desired. Additional cable
can be stored in the port without impacting LF performance.
Rubber feet on the bottom of the enclosure reduce abrasion, and new
integral rigging hardware – also mounted on the enclosure bottom –
facilitates easy flying. The Baltic birch cabinets are protected with
EAW’s RoadCoat™ finish that’s extremely durable, and the rugged
steel grille keeps its distinctive shape even when stood upon. All
components are highly liquid tolerant – virtually impervious to spilled
drinks as well as natural elements like rain.
2-WAY FULL-RANGE STAGE MONITOR
See NOTES TABULAR DATA for details
CONFIGURATION
Subsystem
Transducer
Loading
LF 1x 12 in cone
Vented
HF 1x 1.4 in exit, 3 in voice
Horn-loaded
coil compression driver
Operating Mode
Amplifier Channels
External Signal Processing
Single-amp LF/ HF
High pass filter
Bi-amp LF, HF
DSP w/2-way filters
PERFORMANCE
1
Operating Range
64 Hz to 20 kHz
Nominal Beamwidth (conical)
Horz 90°
Vert 90°
Axial Sensitivity
(whole space SPL)
LF/HF 94 dB
64 Hz to 20 kHz
LF 95 dB
60 Hz to 930 Hz
HF 106 dB
730 Hz to 20 kHz
Input Impedance (ohms)
Nominal
Minimum
LF/HF 8
6.4 @ 818 Hz
LF 8
7.9 @ 231 Hz
HF 8
8.7 @ 4732 Hz
High Pass Filter
High Pass =>50 Hz, 12 dB/octave Butterworth
Accelerated Life Test
2
LF/HF 69 V
600 W @ 8 ohm
LF 69 V
600 W @ 8 ohm
HF 35 V
150 W @ 8 ohm
Calculated Axial Output Limit (whole space SPL)
Average
Peak
LF/HF 122 dB
128 dB
LF 123 dB
129 dB
HF 128 dB
134 dB
ORDERING DATA
Description
Part Number
MW12 2-Way Full Range Loudspeaker Black
0011736-90
1
To achieve specified performance, the listed external signal processing with EAW-provided settings is required.
2
For recommendations to select power amplifier size refer to : “HOW MUCH AMPLIFIER POWER DO I NEED?” on the EAW web site.
PRELIMINAR
Y
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- EAW
- Model
- MW12
- Document type
- Manual
- Language(s)
- English
- Pages
- 6
- File size
- 455.6 KB
- Format
Summary
Details on the EAW MicroWedge MW12 specifications, technical data including configuration, performance metrics, input impedance, life test data, design components, durability, ordering information, and amplifier requirements.
Technical specifications and dimensional drawings for the enclosure, detailing material, finish, precise measurements from multiple angles, tolerances, and information regarding the grille and rubber feet.
Performance characteristics displayed through five graphs showing frequency response under processed/unprocessed conditions, impedance magnitude, and beamwidth at -6 dB SPL points for low-frequency, high-frequency, and complete frequency ranges.
