Earthquake Sound SWS-10X (4-OHM) - Manual
Earthquake Sound SWS-10X (4-OHM) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Model; DEAR VALUED CUSTOMER; The 2-Ohm SWS-8Xi is designed to replace subwoofer in factory; All Specifications Are Subject To Change Without Notice
- Page 3 – SPECIFICATIONS; SWS Enclosures
- Page 4 – FORMULA; Volume; Examples Of Limited Space Applications
- Page 5 – One Subwoofer; SWS-10X Minimum Sealed Example; Two Subwoofers
- Page 6 – EARTHQUAKE 5 YEAR LIMITED WARRANTY; Warranty Continued On Next Page; Alternatively you may register your products online at
SWS-6.5X (
)
SWS-8X (
4-Ohm
)
SWS-8Xi (
2-Ohm
)
SWS-10X (
4-Ohm
)
SWS-12X (
4-Ohm
)
SWS-15X (
4-Ohm
)
Installation Reference Guide
4-Ohm
www.earthquakesound.com
Sound That Will
Move
You
The Sound That Will Move You.
Earthquake Sound reserves the right to amend details of the specifications without notice.
Copyright © Earthquake Sound Corporation
Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545
Phone: 510-732-1000 Fax: 510-732-1095
US PATENT # 6,675,931 B2
S H A L L O W W O O F E R S Y S T E M
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model Revc. (Ohms) Fo. (Hz) Sd. (msqM) BL. (TM) Qms. Qts. SPLo. (dB) V as. (Ltr) Xmax (mm) (Xmax Measured In One Direction) Qes. SWS-6.5 X 3.600 39.31 12.500 4.350 4.192 1.723 1.221 77.3 9.94 15 27.830 23 SWS-8 X /8Xi 3.500 30.394 22.000 6.210 3.987 0.804 0.669 86.7 51.479 28 SWS-10X 3.700 28.477 33...
SPECIFICATIONS SWS-15 X • Speaker diameter = 15"• Mounting depth = 3 1/4"• Cut out mounting hole = 13 3/4"• Weight = 15Lbs• Voice Coil diameter = 2.5"• Aluminum bobbin / wire• Power rating RMS = 400W• Power rating MAX = 800W• Revc = 3.76 Ohms (81mm) (3 1/4") (350mm / 13 3/4")...
Finding Box Dimensions For Recommended Enclosure Volumes: To find the volume best suited for you, you will need to measure the max and min Height, Width and Depth of the area where you to plan to place the sub-enclosure. Then subtract 1.5" each dim to get the internal dims. Now use the internal ...
