Dynacord DPP 4004 - Manual
Dynacord DPP 4004 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CONTENTS
- Page 3 – IMPORTANT SAFETY INSTRUCTIONS; For US and CANADA only:; IMPORTANT SERVICE INSTRUCTIONS
- Page 6 – DYNACORD
- Page 7 – The following only applies to the DPP4012:
- Page 8 – Remote Control Connector
- Page 9 – SPECIFICATIONS
DPP 4004 / DPP 4012
24V POWER SUPPLY - RACK UNIT
Performance Features
• 19" rack size with 2 HU
• primary sync switch-mode power supply; supports any 24 VDC modules in PA-systems
• covered mains switch
• status indicator LEDs (mains and battery)
• smooth initial current inrush
• short circuit protected
• forced ventilation
• mains voltage 104-127 / 207-253 VAC; internally switchable
• rernote output for the remote switching of power amplifiers
• remote output for the remote switching of the battery supply of power amplifiers
• emergency power supply via battery input connector
• switched mains output, max. 1 A
• delayed control output for the release of alarm-gong and summing modules
• direct output, 24 V max. 4 A / 12 A
• switched 24 V output for the connection of modules
• continuous emergency power supply via external battery module
• output for the connection of modules that need persistent power supply (e. g. DPM 4000/4001);
max. 4 A / 12 A
• output for
power fail recognition
OWNER’S MANUAL
11
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CONTENTS Performance Features . . . . . . . . . . . . . . . . . . . . . . . . . 11 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . 13 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Rear View . . . . . . . . . . . . . . . . . . . . . . . . . ...
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point withi...
capacitive loads connected. This output is controlled by the inputs ON/OFF (TOGGLE) (pin 1 of the remotecontrol connector) or ON/OFF (MODULES) (pin 2). If the ON/OFF (MODULES) input is connected to theground potential, the MODULES OUT output is constantly activated; otherwise it is constantly deacti...
