Dynacord DEM 313 - Manual
Dynacord DEM 313 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INSTRUCTIONS; For US and CANADA only:; MOS; SAFETY COMPONENT (HAS TO BE REPLACED WITH ORIGINAL PART ONLY); IMPORTANT SERVICE INSTRUCTIONS
- Page 4 – LIST OF CONTENTS
- Page 5 – Installation instructions; - drip or splashwater; DYNACORD
- Page 6 – Fig. 1 Connection of the battery to the charging unit; Control connector BATTERY CONTROL; Connections of the BATTERY CONTROL pin connector; Note; which needs to discharge first.
- Page 7 – of the output fuse F503; Charging the batteries in the battery modules DEM 316 or DEM 317; C for a 24 V battery.
- Page 10 – Temperature tracking; C. The temperature is to be measured in direct proximity to; - Emergency announcement duration
- Page 11 – Approvals and standards
CHARGING UNIT DEM 313
Features
—
fully automatic charging unit 24V/4A for constant I/U battery charging in continuous battery power
supply mode
—
regulation of charging voltage with high-efficiency primary switched chopper regulator
—
charging output with short-circuit and reverse voltage protection
—
integrated battery monitoring module with overvoltage protection, exhaustive discharge protection,
mains voltage monitoring, battery voltage monitoring, charging circuit monitoring, LED fault
indicator, collective failure information via floating contact
—
integrated 3-digit LC display showing charging voltage and charging current
—
temperature tracking of charging voltage in standby mode
—
connector BATTERY CONTROL with all control functions and failure indication output
—
19" enclosure with 2HU
OWNER’S MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point withi...
LIST OF CONTENTS SAFETY INSTRUCTIONS / SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2. Installation instructions . . . . . . ...
1. Application The charging unit DEM 313 was especially designed for fully automatic charging and monitoring ofbatteries in the emergency power supplies of alarm devices. In conjunction with the battery modules DEM316 with 38 Ah or DEM 317 with 65 Ah rated capacity, this combination results in a rel...
