Dynacord DPA 4410 - Manual
Dynacord DPA 4410 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT SAFETY INSTRUCTIONS; For US and CANADA only:; IMPORTANT SERVICE INSTRUCTIONS
- Page 3 – INDICATORS, CONTROLS AND CONNECTIONS
- Page 4 – TABLE OF CONTENTS
- Page 5 – STANDBY indicator provides no indication.
- Page 6 – Hinweis; POWER OUTPUT
- Page 7 – Diagram 4 Connecting low impedance speakers
- Page 10 – ADDITIONAL FUNCTIONS AND FEATURES; Diagram 8
- Page 11 – NRS 90207 ground fault surveillance; Checking the functioning:
- Page 14 – SPECIFICATIONS OF THE DPA 4410
DPA 4410 POWER AMPLIFIER
Features
•
4 x 100 W output capacity
•
off ground potential 100 V outputs (internally configurable to 70 V/50 V or 4 ohms)
•
all outputs are protected against floating (no load) and short-circuit
•
mains supply 115/230 V AC or battery operation 24 V DC
•
mains switch 115/230 V
•
REMOTE CONTROL start with STANDBY indicator (mains and battery operation)
•
service mains switch
•
GROUND-LIFT switch
•
active ventilated through a temperature-controlled DC ventilator
•
electronically balanced inputs
•
routing switch for parallel operation of the amplifier inputs
•
input level control
•
power-on noise suppression
•
3 LED indicators with CLIPPING indicator for metering purposes
•
MONITOR outputs
•
temperature control with PROTECT indicator
•
fault indicators: READY and GROUND FAULT
•
fault message via off potential READY contact
•
TEST switch for pilot tone surveillance and GROUND FAULT reset
•
off ground potential, balanced input transformer are optionally available
•
pilot tone surveillance module and ground fault surveillance module are optionally available
•
19" rack dimensions with 3 HU
OWNER’S MANUAL
17
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point withi...
INDICATORS, CONTROLS AND CONNECTIONS 1 LED meters 2 CLIP indicator 3 TEST button for checking and reset 4 STANDBY indicator 5 PROTECT indicator 6 GROUND FAULT indicator 7 READY indicator 8 air inlets 9 POWER on switch 10 AC MAINS INPUT connector 11 mains fuse 12 VOLTAGE SELECTOR switch 13 LEVEL 1- 4...
TABLE OF CONTENTS FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 INDICATORS, CONTROLS AND CONNECTIONS . . . . . . . . . . . . . . . ...
