Dukane Camera 445 - Manual

English - 4 Chapter 1 Precautions Always follow these safety instructions when setting up and using the visual presenter: 1. Do not place visual presenter in tilted position. 2. Do not place the visual presenter on an unstable trolley, stand or table. 3. Do not use the visual presenter near water or...

English - 7 Chapter 3 Product Overview kkkkkkk (Bottom) 2. Remote sensor 7. AF button 8. Gooseneck 1. Lamp 4. LED indicator 3. Control panel 5. Lens 6. DIP switch 9. Built-in Microphone

English - 8 3.1 Relative position of the presenter and 445 3.2 Recommend distance * About 470 mm distance between camera and the desktop is recommended. 445 Document Presenter

English - 10 Chapter 4 Installation and Connections 4.1 System diagram 4.2 Mounting the 445 on a desktop stand 1. Please set up the DIP Switch settings first. Refer to Chapter 5 “DIP Switch Settings” in this 445 user manual. 2. Please refer to the Base Installation Guide for installation instruction...

English - 11 4.3.2 Step 2: Connecting the components  Connecting to a projector  Connect the VGA OUT on the 445 to the VGA IN on the projector using the VGA cable.  Connecting to a monitor  Use VGA cable to connect VGA PASSTHROUGH connector on 445 to the VGA IN connector on a monitor. [Note] The...

English - 12 Speaker  Use VGA cable to connect VGA IN connector on 445 to the VGA OUT connector on the computer  Using the USB Cable Connect to USB port then install the supplied queue program.  Using the EXTENDER adapter and RS232 Cable to connect EXTENDER of 445 to a RS232 of computer  Connect...

English - 13 4.5 Installing remote control holder Insert the holder over the gooseneck of the camera and push it down. 4.6 Installing driver and application queue (software) After installing the USB driver and application queue, you can use the following functions via the software:  Control the 445...

English - 14 1. Download the [queue X.X.X +Driver] and its user manual. <Note> Please follow the user manual of queue TM for installation and operation. Chapter 5 DIP Switch Settings <Note> You have to turn the unit OFF and back ON for the setting to take affect. 5.1 Connecting to a proj...

English - 15 5.2 Connecting to a TV 5.2.1 NTSC: America, Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea and Mexico 5.2.2 PAL: Countries/regions not listed above. <Remark> VGA output is not supported once C-Video output has been enabled.

English - 16 Chapter 6 Control Panel/Remote Control and Setting Menu 6.1 Functions of control panel and remote control <NOTE>: OSD is not available at C-Video mode. [Menu] / [Rotate] / [PAN] / [Source] / [Record] / [Capture] / [Delete] / [PBP] / [Slide Show] functions are not available on the ...

English - 20 Chapter 7 Descriptions of major functions 7.1 I would like to switch image sources Live image is the default of image source. Press [Source] on the remote control or control panel to change: 1. Live images (default) 2. SD card (priority) or internal memory 3. Computer. 7.2 I would like ...

English - 21 7.8 I would like to capture images 7.8.1 Setting the quality of captured images 1. Press [Menu] on the remote control or control panel to enter the setting menu. 2. Press [  ] or [  ] to the [Setting]. 3. Press [  ] to find [Image Quality]. 4. Press [  ] or [  ] to select among [Hi...

English - 22 7.11 I would like to automatically delete the captured images whenever it is turned off (Auto Erase) 1. Press [Menu] on the remote control or control panel to enter the setting menu. 2. Press [  ] or [  ] to access the [Advance] menu. 3. Press [  ] or [  ] to [Auto Erase]. 4. Press ...

English - 24 7.17 I would like to reduce the image noise (Noise Reduction) This function enables visual presenter to automatically clear image noise. The noise is especially obvious when Visual presenter is connected to a DLP projector. You can use this function to improve the image quality. 1. Pres...

English - 25 7.19 Using a SD card 7.19.1 Deactivate the write protect function (SD Lock) on the card If the write protect function of the SD card is activated, you will not be able to use the Capture function, although you can still read the files in it. Adjust the Lock of the SD card to deactivate ...

English - 26 7.20.2 I would like to insert a photo in MS-Word 1. Click Insert > Image > From Scanner or Camera in MS-Word. 2. Select [Visual Presenter V2] and click [Custom Insert]. 3. Click [Get Picture]. It will capture the photo of live image. 7.20.3 I would like to change the setting of Ca...

English - 27 3. A window showing a live image (see below) will be displayed. 4. Press [Setting] to control the 445 via the Camera Settings interface. The operating procedure is the same with the remote control and control panel of the 445. Refer to 445 User Manual Chapter 6 Control Panel / Remote Co...

English - 28 7.20.5 I would like to set the 445 as a PC Camera 1. Press [Menu] on the control panel to enter the setting menu. 2. Press [  ] or [  ] to the [Setting] menu. 3. Press [  ] to find [USB Transfer]. 4. Press [  ] or [  ] to select [Camera]. 5. A window will be displayed, showing the ...

English - 29 <Note> Doing this will disable the Capture function. Suggest you return it to [Camera] mode after using this function. Please follow the steps below. 1. Press [Menu] on the control panel to enter the setting menu. 2. Press [  ] or [  ] to the [Setting] menu. 3. Press [  ] to fi...

English - 31 Chapter 9 Troubleshooting This chapter describes problems you may encounter while using 445. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center. No. Issues Solut...