Draper CM ST1200 - Manual

by

Copyright © 2007 Draper Inc. Form SMSFlatscreen-Medium_Sub07-R Printed in U.S.A.

PROJECT:

ARCHITECT:

CONTRACTOR:

SUPPLIER:

DATE:

REVISED:

Please Mark Appropriate Selections
Select Mount (See back side for details of each model):

WM T

Quantity

WM T2

Quantity

WM ST

Quantity

CM ST

CM

ST400

Quantity

CM

ST800

Quantity

CM

ST1200

Quantity

CM

ST1800

Quantity

Select Options

M ST Kit

Quantity

WM T

CM ST400/800/

1200/1800

SMS Flatscreen Mounts for
Medium Weight Displays

WM T2

WM ST

Specifi cations—SMS Flatscreen Medium Weight Mounts for
Flat Panel Displays

SMS Flatscreen Medium Weight Mounts for

displays smaller than 37" diagonal and weighing less than 66 lbs., model CM
ST400/CM ST800/CM ST1200/CM ST1800/WM T/WM T2/WM ST, by Draper,
Inc., of Spiceland, Indiana.
Universal mounting bracket or universal arms shall be provided to match LCD-
TFT Flat Panel Displays with VESA

®

75 x 75 mm, 100 x 100 mm, 100 x 200

mm, or 200 x 200 mm mounting hole spacing, or maximum hole mounting
pattern of 330 mm (vertical) x 420 mm (horizontal). Bracket slides into steel
mating bracket on wall supports for easy, safe and sturdy mounting. Hardware
for mounting universal bracket arms to Flat Panel Display provided by Draper;
hardware for attaching mount to wall supplied by others. M ST kits required for
each additional display. Silver fi nish.

CM ST400/800/1200/1800:

Column shall securely attach to ceiling with steel

ceiling plate (provided). Installer shall provide mounting hardware appropriate
to ceiling conditions. Can hold up to four total displays depending on display
sizes and length of mount. Displays can be placed back to back. Display can
be tilted up to 12 degrees and rotated up to 15 degrees side to side. Each CM
ST ceiling mount includes one M ST kit for mounting one display. Additional
M ST kits required for each additional display. Silver fi nish/black accents.
Maximum weight capacity 66 lbs.

WM T:

Universal wall mount shall be of aluminum construction, with silver

fi nish, and shall be compatible with VESA

®

75 x 75 mm, 100 x 100 mm,

100 x 200 mm, or 200 x 200 mm mounting hole spacing, or maximum hole
mounting pattern of 330 mm (vertical) x 420 mm (horizontal). Can be mounted
to single wall stud/support. Puts back of screen less than 1½" from wall. 15°
forward tilt. For LCD-TFT Flat Panel Displays up to 37" diagonal. Universal
mounting arms built in. Flange screws lock bottom edge of universal arms in
position. Maximum weight capacity 66 lbs.

WM T2:

Universal wall mount shall be of steel construction. Back of display

is only 1½" from wall surface. Display can be tilted up to 10 degrees. Mounts
to two wall studs/supports spaced at 16" on center. Silver fi nish. Universal
bracket built in, no additional bracket required.

WM ST

: Universal mount places back of display only 3¼" from wall surface.

Display can be tilted up to 12 degrees and rotated approximately 20 degrees
side to side. Silver fi nish. Universal bracket built in, no additional bracket
required. Maximum weight capacity 66 lbs.

Options:

M ST Kit:

Needed when adding additional displays to CM ST ceiling mounts.

One M ST kit needed for each display. Includes tilt and swivel feature to tilt
display up to 12 degrees and rotate display approximately 15 degrees side to
side. Also includes M Universal Bracket to attach display. Silver fi nish.

For displays smaller than 37" diagonal
and weighing less than 66 lbs.