Draper Video Projector - Manuals

Draper Video Projector – Manual in PDF format online.

Manuals:

Manual

Manual Draper Video Projector

Summary

Page 2 - Power to the Revelation should be turned; Adjusting Image; To adjust the limit switch of the door:; Any adjustments to the limit switches should be done with the; The bottom limit switch bracket is set at the factory for; Securing Projector; 20 V Revelation by DRAPER; Electrical Connections; Single Station Control; Installing Projector; Install a projector with the capability to invert its image.; An extension plate is provided if the feet; Please Note; www

sary connections and plug the power cord of the pro jec tor into the receptacle provided in the electrical chas sis. Power to the Revelation should be turned off any time electrical connections or mechanical ad just ments are made to the Revelation! Cycle the mir rored door down to the low ered posi...

Page 3 - 20 V Revelationby DRAPER; Light Path A; Choose a projector* based on its light path

220 V Revelationby DRAPER Page 3 of 8 should be secured into place using the eight projector stand offs pro vid ed. Two of the standoffs have a removable hook and loop material to be used at the rear of the projector for ease of removing the projector. The stand offs will en-sure proper re lo ca tio...

Page 4 - Revelation Dimensions; Electrical Specifi cations; Model A; Model A Model B; Ceiling line

220 V Revelation by DRAPER Page 4 of 8 Revelation Dimensions Electrical Specifi cations Operating Voltage 220 V a.c. 50–60 Hz Amperes 1 Amp** Control Voltage 12 V a.c. Motor Specifi cations: Voltage 220 V a.c. 50–60 Hz Amps .43 Torque 40 IN–lbs. * Includes allowance for housing in plenum.** Does not...