Draper 64260 - Manual
Draper 64260 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DECLARATION OF CONFORMITY; OIL FREE COMPRESSORS
- Page 4 – POWER SUPPLY
- Page 6 – GETTING TO KNOW YOUR AIR COMPRESSOR
- Page 7 – COMPRESSOR OPERATION
- Page 8 – MAINTENANCE
- Page 10 – TROUBLE SHOOTING GUIDE; DRAPER HELPLINE
- Page 11 – NOTES
- Page 12 – DRAPER TOOLS LIMITED,
OIL FREE
COMPRESSORS
■
STOCK No.30561
■
PART No.DA200
60607
DA6/200
64260
DA6/201
60606 DA25/180
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use. We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
01/2005
DA6/200
DA200
DA25/180
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CONTENTS: Page No. Contents/Declaration ...................................................................................... 1 Power Supply ................................................................................................... 2 General Safety Warning ....................................
POWER SUPPLY CONNECTING THE COMPRESSOR TO THE POWER SUPPLY:To eliminate the possibility of an electric shock your machine has been fitted with a BS approved, non rewireable moulded plug and cable which incorporates a fuse, the value of which is indicated on the pin face of the plug. Should the fuse ...
DA200 (1) HANDLE. (2) COWLING- covers, protects hot/moving parts. (3) PRESSURE REGULATOR- adjusts output air pressure. (4) AIR OUTLET CONNECTOR. (5) FEET. (6) ON/OFF SWITCH (1) AIR RECEIVER- stores air. (2) MOTOR COWLING- covers, protects hot/moving parts. (3) PRESSURE GAUGE- indicates receiver air ...
