Page 2 - Drunken driving is one of the most frequent causes of
VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the nameChrysler LLC shall be deemed to be deleted and thename Chrysler Canada Inc. used in substitution there-fore. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents.Your driving ability can be se...
Page 3 - TABLE OF CONTENTS; SECTION
TABLE OF CONTENTS SECTION PAGE 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 UNDERSTANDING THE ...
Page 5 - INTRODUCTION; CONTENTS
INTRODUCTION CONTENTS 䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 Rollover Warning . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 How To Use This Manual . . . . . . . . . . . . . . . . . . 5 䡵 Warnings And Cautions . . . . . . . . . . . . . . . . . . . 7 䡵 Vehicle I...
Page 6 - parts, and is interested; ROLLOVER WARNING
INTRODUCTION This Owner’s Manual has been prepared with the assis-tance of service and engineering specialists to acquaintyou with the operation and maintenance of your vehicle.It is supplemented by a Warranty Information Bookletand various customer-oriented documents. You areurged to read these pub...
Page 7 - Failure to use driver and passenger seat belts; provided; HOW TO USE THIS MANUAL; Rollover Warning Label
Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the U.S.government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or moreeach year and could reduce disabling injuries by twomillion annually. ...
Page 9 - It is illegal to remove the VIN.; Vehicle Identification Number
WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op-erating procedures that could result in an accident orbodily injury. It also contains CAUTIONS against proce-dures that could result in damage to your vehicle. If youdo not read this entire manual, you may miss importantinformati...
Page 10 - VEHICLE MODIFICATIONS/ALTERATIONS
VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle couldseriously affect its roadworthiness and safety andmay lead to an accident resulting in serious injury ordeath. 8 INTRODUCTION
Page 11 - THINGS TO KNOW BEFORE STARTING YOUR VEHICLE; Sentry Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . 12 ▫ Ignition Key Removal . . . . . . . . . . . . . . . . . . 12 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . . 13 䡵 Sentry Key 威 . . . . . . . . . . . . . . . . . . . . . . . ...
Page 14 - Place the shift lever in PARK.; Vehicle Key
A WORD ABOUT YOUR KEYS The keys for your vehicle are double-sided. You caninsert the keys into the locks with either side up. The keys for your new vehicle are enclosed in a plasticbag with the key code number on it. If you received yourkeys without the bag, ask your authorized dealer to giveyou the...
Page 15 - Ignition Switch Positions
WARNING! Never leave children alone in a vehicle. Leavingunattended children in a vehicle is dangerous for anumber of reasons. A child or others could be seri-ously or fatally injured. Don’t leave the key in theignition. A child could operate power windows,other controls, or move the vehicle. CAUTIO...
Page 16 - SENTRY KEY; The Sentry Key
NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACCposition. SENTRY KEY 姞 The Sentry Key 威 Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. Thesystem does not need to be armed or activated. Operationis automatic, rega...
Page 18 - Customer Key Programming
procedure. This procedure consists of programming ablank key to the vehicle electronics. A blank key is onethat has never been programmed. NOTE: When having the Sentry Key 威 Immobilizer System serviced, bring all vehicle keys with you to anauthorized dealer. Customer Key Programming If you have two ...
Page 20 - To Disarm the System:; into the ignition lock
To Arm the System: Remove the keys from the ignition switch and exit thevehicle. Lock the doors and liftgate by pressing thepower door LOCK switch or the LOCK button on theRemote Keyless Entry (RKE) transmitter. Close all thedoors. The Vehicle Security Light (located in the instrumentcluster) will f...
Page 21 - Three Button RKE transmitter
ILLUMINATED ENTRY The interior lights come on when you open any door.They will remain on for about 30 seconds after all doorsare closed then fade to off. The lights also will fade to off if you turn on the ignitionafter you close all the doors. REMOTE KEYLESS ENTRY This system allows you to lock or ...
Page 22 - To Unlock the Doors and Liftgate; Release both buttons at the same time.
To Unlock the Doors and Liftgate Press and release the UNLOCK button on the RKEtransmitter once to unlock the driver’s door, or twice tounlock all doors and the liftgate. The parking lights willflash to acknowledge the unlock signal. The illuminatedentry system will also turn on. Remote Key Unlock, ...
Page 23 - To Lock the Doors and Liftgate
To Lock the Doors and Liftgate Press and release the LOCK button on the RKE transmit-ter to lock all doors and the liftgate. If the ignition is OFFwhen the doors are locked, the parking lights will flashonce and the horn will sound a single chirp. Sound Horn with LockThis feature will cause the horn...
Page 24 - Express Down Window Feature — If Equipped
Flash Lights with LockThe feature will cause the parking lights to flash whenthe doors are locked or unlocked with the RKE transmit-ter. This feature can be turned on or off. To change thecurrent setting, proceed as follows: • On Electronic Vehicle Information Center (EVIC)equipped vehicles, refer t...
Page 25 - Using the Panic Alarm; The PANIC and SECURITY alarms are quite; Programming Additional Transmitters; If you do not have a programmed RKE trans-; Battery Replacement; The recommended replacement battery is CR2032.
Using the Panic Alarm NOTE: The PANIC and SECURITY alarms are quite different. Please take a moment to activate the PANICand SECURITY modes to hear the differences in the horn.If one should sound in the future, you will need to knowwhich mode has been activated in order to deactivate it. To turn the...
Page 26 - General Information; This device may not cause harmful interference.; Separating Case Halves
2. With the RKE transmitter buttons facing down, use aflat blade to pry the two halves of the RKE transmittercase apart. Make sure not to damage the seal duringremoval. 3. Remove and replace the batteries. Avoid touching thenew batteries with your fingers. Skin oils may causebattery deterioration. I...
Page 27 - Changes or modifications not expressly ap-; REMOTE STARTING SYSTEM — IF EQUIPPED; Remote Start Button
NOTE: Changes or modifications not expressly ap- proved by the party responsible for compliance couldvoid the user’s authority to operate the equipment. If your RKE transmitter fails to operate from a normaldistance, check for these two conditions: 1. Weak batteries in RKE transmitter. The expected ...
Page 28 - DOOR LOCKS
Once the engine starts it will run for 15 minutes. Tocancel remote start, press and release the REMOTESTART button once. To enter the vehicle while the engine is running during aremote start, you must first unlock the vehicle using theUNLOCK button on the RKE transmitter. Once thevehicle is unlocked...
Page 29 - Manual Door Locks; Manual Lock Plunger
If any other active warnings including “GATE” or “GAS-CAP” are present, they will be shown in the VF displayand will also continue to cycle. If the vehicle is moving,three single chimes will occur (one chime for eachcomplete display cycle, three cycles total). Afterward, thedisplay will continue to ...
Page 30 - Power Door Locks; Power Door Lock Switch
WARNING! (Continued) • When leaving the vehicle, always remove the keyfrom the ignition lock, and lock your vehicle. Donot leave unattended children in the vehicle, orwith access to an unlocked vehicle. Unsuperviseduse of vehicle equipment may cause severe per-sonal injuries and death. Power Door Lo...
Page 31 - Automatic Door Locks; The automatic door locks feature is enabled.
Automatic Door Locks The doors will lock automatically on vehicles with powerdoor locks if all of the following conditions are met: 1. The automatic door locks feature is enabled. 2. The transmission is in gear. 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mp...
Page 32 - Automatic Unlock Doors on Exit
4. A single chime will indicate the completion of theprogramming. 5. Repeat these steps if you want to return this feature toits previous setting. NOTE: Use the automatic door locks feature in accor- dance with local laws. Automatic Unlock Doors on Exit The doors will unlock automatically on vehicle...
Page 33 - Inserting Ignition Key
4. A single chime will indicate the completion of theprogramming. 5. Repeat these steps if you want to return this feature toits previous setting. NOTE: Use the automatic unlock doors on exit feature in accordance with local laws. Child-Protection Door Lock System (Rear Doors) Insert the tip of the ...
Page 34 - For emergency exit with the system engaged,; WINDOWS; Power Window Switches
NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll downthe window, and open the door with the outside doorhandle. WINDOWS Power Windows The power window controls are located on the driver’sdoor trim panel. There is a single switch on the frontpasseng...
Page 37 - Window Lockout Switch
WARNING! There is no anti-pinch protection when the windowis almost closed. Be sure to clear all objects from thewindow before closing. ResetAt some point in time, it may be necessary to reactivatethe auto-up feature. To do so, perform the followingprocedure: 1. Pull the window switch up to close wi...
Page 39 - OCCUPANT RESTRAINTS; The front airbags have a multistage inflator; Liftgate Release
WARNING! Driving with the liftgate open can allow poisonousexhaust gases into your vehicle. You and your pas-sengers could be injured by these fumes. Keep theliftgate closed when you are operating the vehicle. OCCUPANT RESTRAINTS Some of the most important safety features in yourvehicle are the rest...
Page 41 - Lap/Shoulder Belt Operating Instructions; Latch Plate
WARNING! • Wearing a seat belt incorrectly is dangerous. Seatbelts are designed to go around the large bones ofyour body. These are the strongest parts of yourbody and can take the forces of a collision the best.Wearing your belt in the wrong place could makeyour injuries in a collision much worse. ...
Page 42 - Latch Plate To Buckle
3. When the belt is long enough to fit, insert the latchplate into the buckle until you hear a “click.” WARNING! A belt that is buckled into the wrong buckle will notprotect you properly. The lap portion could ride toohigh on your body, possibly causing internal inju-ries. Always buckle your belt in...
Page 44 - Removing Slack From Belt
5. Position the shoulder belt on your chest so that it iscomfortable and not resting on your neck. The retractorwill withdraw any slack in the belt. 6. To release the belt, push the red button marked PRESSon the buckle. The belt will automatically retract to itsstowed position. If necessary, slide t...
Page 45 - Adjustable Upper Shoulder Belt Anchorage; The adjustable upper shoulder belt anchorage is; Adjusting Upper Shoulder Belt
Adjustable Upper Shoulder Belt Anchorage In the front seating positions, the shoulder belt can beadjusted upward or downward to position the belt awayfrom your neck. Press the release button to release theanchorage, and then move it up or down to the positionthat fits you best. NOTE: The adjustable ...
Page 46 - Buckle the combination lap and shoulder belt.; Energy Management Feature
Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack inthe shoulder belt. When To Use The Automatic Locking ModeAnytime a child safety seat is installed in the rear centerseating position. Children 12 years ...
Page 50 - Front Airbag Components
Driver And Front Passenger SupplementalRestraint Systems (SRS) This vehicle has airbags for both the driver and rightfront passenger as a supplement to the seat belt restraintsystems. The driver’s front airbag is mounted in thesteering wheel. The passenger side airbag is mounted inthe instrument pan...
Page 51 - Window Airbag Location
This vehicle is equipped with window bags to protect thedriver, front, and rear passengers sitting next to a win-dow. They are located above the side windows. Theircovers are also labeled SRS/AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim, but they will open to allow airbag depl...
Page 55 - How The Airbag System Works; Passenger Airbag Disable (PAD) Indicator Light
• Occupant Classification System (OCS) — Front Pas-senger Seat Only − Occupant Classification Module − Passenger Airbag Disable (PAD) Indicator Light − Weight Sensors How The Airbag System Works • The Occupant Restraint Control (ORC) module de-termines if a frontal, side, or rollover collision is se...
Page 57 - assume the airbag is turned off. Move the child; Indicator Light Location
The “PAD Indicator Light” should not be illuminatedwhen an adult passenger is properly seated in the frontpassenger seat. In this case, the airbag is ready to beinflated if a collision requiring an airbag occurs. For occupants classified in the “child” size category, the“PAD Indicator Light” will be...
Page 61 - The following requirements must be strictly adhered to:
The front passenger seat assembly contains critical com-ponents that affect the front passenger airbag deploy-ment. Correctly functioning front passenger seat compo-nents are critical for the Occupant Classification System(OCS) to properly classify the front passenger and calcu-late the proper airba...
Page 62 - A frontal collision that is not severe enough to
If A Deployment OccursThe airbag system is designed to deploy when theOccupant Restraint Control (ORC) module detects amoderate-to-severe frontal collision to help restrain thedriver and front passenger, and then to immediatelydeflate. NOTE: A frontal collision that is not severe enough to need airb...
Page 63 - Maintaining Your Airbag System
WARNING! Deployed airbags cannot protect you in another col-lision. Have the airbags, and seat belt retractor as-sembly replaced by an authorized dealer as soon aspossible. Also, have the Occupant Classification Sys-tem serviced as well. Enhanced Accident Response SystemIn the event of an impact tha...
Page 64 - Perchlorate Material – special handling may apply.
WARNING! (Continued) • Do not attempt to modify any part of your ad-vanced airbag system. The airbag may inflateaccidentally or may not function properly if modi-fications are made. Take your vehicle to an autho-rized dealer for any advanced airbag system ser-vice. If your seat including your trim c...
Page 65 - Airbag Warning Light; Remains on after the six to eight second interval.
Airbag Warning Light You will want to have the airbag system ready to inflate foryour protection in an impact. The airbag system is designedto be maintenance free. If any of the following occurs, havean authorized dealer service the system promptly: • Does not come on during the six to eight seconds...
Page 67 - Child Restraint
• Brake status (service and parking brakes) • Accelerator status (including vehicle speed) • Engine control status (including engine speed) • Transmission gear selection • Cruise control status • Traction/stability control status • Tire Pressure Monitoring System status Child Restraint Everyone in y...
Page 68 - Infants and Child Restraints
Infants and Child Restraints • Safety experts recommend that children ride rearward-facing in the vehicle until they are at leastone year old and weigh at least 20 lbs (9 kg). Two typesof child restraints can be used: rearward-facing infantcarriers and “convertible” child seats. • The infant carrier...
Page 71 - Make sure that the child is upright in the seat.
The belt-positioning booster seat is for children weighingmore than 40 lbs (18 kg), but who are still too small to fitthe vehicle’s seat belts properly. If the child cannot sitwith knees bent over the vehicle’s seat cushion while thechild’s back is against the seatback, they should use abelt-positio...
Page 73 - Latch Anchorages
Installing the LATCH-Compatible Child RestraintSystemWe urge that you carefully follow the directions of themanufacturer when installing your child restraint. Not allchild restraint systems will be installed as described here.Again, carefully follow the installation instructions thatwere provided wi...
Page 74 - Tether Strap Mounting
In addition, there are tether strap anchorages behind eachrear seating position located on the back of the seat. Many, but not all restraint systems will be equipped withseparate straps on each side, with each having a hook orconnector for attachment to the lower anchorage and a means of adjusting t...
Page 76 - To attach a child restraint tether strap:
If the belt still can’t be tightened, or if by pulling andpushing on the restraint loosens the belt, you may needto do something more. Disconnect the latch plate fromthe buckle, turn the buckle around, and insert the latchplate into the buckle again. If you still can’t make thechild restraint secure...
Page 77 - ENGINE BREAK-IN RECOMMENDATIONS
Transporting PetsAirbags deploying in the front seat could harm your pet.An unrestrained pet will be thrown about and possiblyinjured, or injure a passenger during panic braking or ina collision. Pets should be restrained in the rear seat inpet harnesses or pet carriers that are secured by seat belt...
Page 81 - UNDERSTANDING THE FEATURES OF YOUR VEHICLE; UConnect
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 ▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . 83 ▫ Automatic Dimming Mirror — If Equipped . . . 84 ▫ Outside Mirrors . . . . . . . . . . . . . . . . . . . . . . . ...
Page 84 - Rear Cargo Slide Out System (Load N Go
▫ Closing Sunroof - Express . . . . . . . . . . . . . . . 151 ▫ Closing Sunroof - Manual Mode . . . . . . . . . . 152 ▫ Pinch Protect Feature . . . . . . . . . . . . . . . . . . 152 ▫ Pinch Protect Override . . . . . . . . . . . . . . . . . 152 ▫ Venting Sunroof - Express . . . . . . . . . . . . . ....
Page 85 - Adjusting Rearview Mirror
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal andvertical adjustment of the mirror. The mirror should beadjusted to center on the view through the rear window. Headlight glare can be reduced by moving the smallcontrol under the mirror to the night position (toward th...
Page 86 - Automatic Dimming Mirror
Automatic Dimming Mirror — If Equipped This mirror will automatically adjust for headlight glarefrom vehicles behind you. You can turn the feature on oroff by pressing the button at the base of the mirror. A lightin the button will illuminate indicate when the dimmingfeature is activated. CAUTION! T...
Page 87 - Power Mirrors; Power Mirror Switch
WARNING! Vehicles and other objects seen in the right sideconvex mirror will look smaller and farther awaythan they really are. Relying too much on your rightside mirror could cause you to collide with anothervehicle or other object. Use your inside mirror whenjudging the size or distance of a vehic...
Page 88 - Illuminated Vanity Mirror
Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on each sun visor. To usethe mirror, rotate the sun visor down and swing themirror cover upward. The lights will turn on automati-cally. Closing the mirror cover will turn off the light. Sun Visor “Slide-Out” FeatureThe sun vis...
Page 90 - Operation
Phone Button The rearview mirror contains the microphonefor the system (depending on the type ofmirror and radio equipped), and either theradio or the mirror has the two control buttons (PHONE Button and VOICE RECOGNITION button)that will enable you to access the system. Voice Recognition Button Act...
Page 91 - System to a Cellular Phone
• For certain operations, compound commands can beused. For example, instead of saying ⬙ Setup ⬙ and then ⬙ Phone Pairing, ⬙ the following compound command can be said: ⬙ Setup Phone Pairing. ⬙ • For each feature explanation in this section, only thecombined form of the voice command is given. Youca...
Page 99 - Phone Call Features
• The UConnect 威 system will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through theUConnect 威 system if the feature(s) are available on your cellular service plan. For example, if you...
Page 101 - Redial
Call TerminationTo end a call in progress, momentarily press the PHONEbutton. Only the active call(s) will be terminated and ifthere is a call on hold, it will become the new active call.If the active call is terminated by the far end, a call onhold may not become active automatically. This is cellp...
Page 103 - system to allow use of this vehicle feature
Canada and 060 for Mexico). The number dialed maynot be applicable with the available cellular serviceand area. • If supported, this number may be programmable onsome systems. To do this, press the PHONE buttonand say ‘Setup’, followed by ‘Emergency’. • The UConnect 威 system does slightly lower your...
Page 110 - Far End Audio Performance
• fully closed windows, • dry weather condition. • Even though the system is designed for users speakingin North American English, French, and Spanish ac-cents, the system may not always work for some. • When navigating through an automated system suchas voice mail, or when sending a page, at the en...
Page 111 - Bluetooth
• dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity, echo, and loudnessto a large degree rely on the phone and network, andnot the UConnect 威 system. • Echo at the far end can sometimes be reduced bylowering the in-vehicle audio volume. • In a conve...
Page 117 - This device may not cause harmful interference.
General Information This device complies with Part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions: • Changes or modifications not expressly approved bythe party responsible for compliance could void theuser’s authority to operate the equipment. • T...
Page 119 - In this mode, you can say the following commands:
Commands The Voice Recognition system understands two types ofcommands. Universal commands are available at alltimes. Local commands are available if the supportedradio mode is active. Changing the Volume 1. Start a dialogue by pressing the VR hard-key. 2. Say a command (e.g., “Help”). 3. Use the ON...
Page 122 - Voice Training; system Voice Training feature may be used.; SEATS; Manual Seat Adjustment
Voice Training For users experiencing difficulty with the system recog-nizing their voice commands or numbers, the UConnect 威 system Voice Training feature may be used. 1. Press the VR hard-key, say “System Setup” and onceyou are in that menu then say “Voice Training.” This willtrain your own voice ...
Page 123 - Front Seat Adjustment — Recline; Seatback Release Lever
Using body pressure, move forward and rearward on theseat to be sure the seat adjusters have latched. WARNING! Adjusting a seat while the vehicle is moving isdangerous. The sudden movement of the seat couldcause you to lose control. The seat belt might not beproperly adjusted and you could be injure...
Page 124 - Power Seat Switches
WARNING! Do not ride with the seatback reclined so that the seatbelt is no longer resting against your chest. In acollision you could slide under the seat belt and beseriously or even fatally injured. Use the reclineronly when the vehicle is parked. Six-Way Driver’s Power Seat with ManualRecliner Th...
Page 125 - Fold Flat Passenger Seat
Fold Flat Front Passenger Seat The front passenger seat can be folded flat to allow forextended cargo space. Pull up on the lever to fold downthe seat back. Head Restraints Head restraints can reduce the risk of whiplash injury inthe event of impact from the rear. Adjustable headrestraints should be...
Page 126 - Heated Seats — If Equipped; This feature heats the front driver and passenger seats.; Heated Seat Switches
Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for each heater are located near the bottomcenter of the instrument panel. After turning ON the ignition, Press the switchonce to select High level heating. Press theswitch a second time to select Low le...
Page 127 - Rear Seat Release Strap
WARNING! • Persons who are unable to feel pain to the skinbecause of advanced age, chronic illness, diabetes,spinal cord injury, medication, alcohol use, ex-haustion or other physical condition must exercisecare when using the seat heater. It may cause burnseven at low temperatures, especially if us...
Page 128 - To Lower Rear Seat; Fold the rear seat completely forward.
• Be sure that the front seats are fully upright andpositioned forward. This will allow the rear seat tofold down easily. WARNING! • It is extremely dangerous to ride in a cargo area,inside or outside of a vehicle. In a collision, peopleriding in these areas are more likely to be seri-ously injured ...
Page 129 - TO OPEN AND CLOSE THE HOOD; Hood Release Lever
To Raise Rear SeatIf locked in the folded position, pull the release strap(toward the front of the vehicle). Raise the seatback and lock it into place. If interferencefrom the cargo area prevents the seatback from fullylocking, you will have difficulty returning the seat to itsproper position. WARNI...
Page 130 - Underhood Safety Latch
2. Push the safety latch lever to the right. It is locatedbetween the grille and hood opening left of the center. To prevent possible damage: • Do not slam the hood to close it. • Use a firm downward push at the center front edge ofthe hood to ensure that both latches engage. • Never drive your vehi...
Page 131 - Multifunction Lever
LIGHTS Multifunction Lever The multifunction lever controls the operation of theparking lights, headlights, headlight beam selection,passing light, fog lights, instrument panel light dimmingand turn signals. The multifunction lever is located onthe left side of the steering column. Multifunction Lev...
Page 132 - High Beam Headlights; Headlight Switch
Parking Lights, Instrument Panel Lights andHeadlights Turn the end of the multifunction lever to the first detentfor parking lights and instrument panel lights. Turn tothe second detent for headlight operation. To change the brightness of the instrument panel lights,rotate the center portion of the ...
Page 133 - Front Fog Lights — If Equipped; The fog lights will only operate with the parking; Turn Signals; A tone will chime if the turn signals are left on; Daytime Running Lights — If Equipped
Flash-to-Pass You can signal another vehicle with your headlights bylightly pulling the multifunction lever toward the steer-ing wheel. This will cause the headlights to turn on athigh beam and remain on until the lever is released. Front Fog Lights — If Equipped The front fog light switch is in the...
Page 134 - Windshield Wiper/Washer Switch
Interior Lights The overhead light comes on when a door is opened. Itmay also be turned on by rotating the control for thedimmer switch on the multifunction lever fully upward.The overhead light will automatically turn off in approxi-mately 10 minutes if a door is left open or the dimmercontrol is l...
Page 136 - TILT STEERING COLUMN; Tilt Steering Control Handle
TILT STEERING COLUMN To tilt the column, push down on the lever under themultifunction lever and move the wheel up or down asdesired. Pull the lever back upwards to lock the columnfirmly in place. WARNING! Tilting the steering column while the vehicle ismoving is dangerous. Without a stable steering...
Page 137 - Electronic Speed Control Lever
ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Control takes overthe accelerator operation at speeds greater than 25 mph(40 km/h). The Electronic Speed Control lever is located on the rightside of the steering wheel. To Activate Push the ON/OFF button. The CRUISE indicator...
Page 138 - To Deactivate; The Electronic Speed Control system has been
NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET lever. To Deactivate A soft tap on the brake pedal, pulling the ElectronicSpeed Control lever toward you, “CANCEL”, or normalbrake or clutch pressure while slowing the vehicle willdeactivate speed con...
Page 139 - The Electronic Speed Control system maintains; REAR PARK ASSIST SYSTEM — IF EQUIPPED
Manual Transmission Depressing the clutch pedal will disengage the ElectronicSpeed Control. A slight increase in engine RPM before thespeed control disengages is normal. Vehicles equipped with manual transmissions may needto be shifted into a lower gear to climb hills withoutspeed loss. WARNING! Ele...
Page 140 - System Usage Precautions
System Usage Precautions NOTE: • Ensure that the rear bumper is free of dirt and debristo keep the Rear Park Assist System operating prop-erly. • Jackhammers, large trucks, and other vibrations couldaffect the performance of the Rear Park Assist System. • When you turn off the Rear Park Assist Syste...
Page 142 - Enabling and Disabling the System
WARNING! (Continued) • Before using the Rear Park Assist System, it isstrongly recommended that the ball mount andhitch ball assembly is disconnected from the ve-hicle when the vehicle is not used for towing.Failure to do so can result in injury or damage tovehicles or obstacles because the hitch ba...
Page 143 - System Operation; Rear Park Assist Switch
Vehicles Equipped with Rear Park Assist SwitchYou can turn the Rear Park Assist System on or off bypressing the Rear Park Assist switch located the lowerswitch bank below the climate controls. System Operation The system uses four sensors located in the rear bumperfascia to scan for obstacles up to ...
Page 146 - GARAGE DOOR OPENER — IF EQUIPPED; HomeLink
GARAGE DOOR OPENER — IF EQUIPPED HomeLink 威 replaces up to three remote controls (hand- held transmitters) that operate devices such as garagedoor openers, motorized gates, lighting, or home securitysystems. The HomeLink 威 unit operates off your vehicle’s battery. The HomeLink 威 buttons that are loc...
Page 147 - Programming HomeLink; erase all channels before you begin training.
WARNING! • Your motorized door or gate will open and closewhile you are training the Universal Transceiver.Do not train the transceiver if people or pets are inthe path of the door or gate. Only use this trans-ceiver with a garage door opener that has a “stopand reverse” feature as required by Feder...
Page 150 - Gate Operator/Canadian Programming; to pick up the signal during programming.; Continue to press and hold the HomeLink; ” earlier in this section.; Using HomeLink; button. Activation will now occur for the
Gate Operator/Canadian Programming Canadian radio-frequency laws require transmitter sig-nals to “time-out” (or quit) after several seconds oftransmission – which may not be long enough forHomeLink 威 to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are...
Page 152 - This device may not cause harmful interference; POWER SUNROOF — IF EQUIPPED; Power Sunroof Switch
General Information This device complies with FCC rules Part 15 and IndustryCanada RSS-210. Operation is subject to the followingtwo conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may bereceived including interference that may cause und...
Page 154 - To ensure the sunroof is fully closed, press and; Closing Sunroof - Manual Mode; Pinch protection is disabled while the switch is; Venting Sunroof - Express; Press and release the
position. The sunroof will close fully and stop automati-cally. This is called Express Close. During Express Closeoperation, any movement of the switch will stop thesunroof. NOTE: To ensure the sunroof is fully closed, press and hold the switch until the sunroof has completely stoppedmoving. Closing...
Page 155 - Sunshade Operation; The sunshade cannot be closed if the sunroof is; Wind Buffeting
Sunshade Operation The sunshade can be opened manually. However, thesunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting Wind buffeting can be described as the perception ofpressure on the ears or a helicopter-type sound in...
Page 156 - Front Power Outlet
ELECTRICAL POWER OUTLET This vehicle has two 12-Volt auxiliary power outlets thatcan provide up to 20 Amps of current for accessoriesdesigned for use with the standard power outlet adapt-ers. The front power outlet, located in the lower portionof the instrument panel, has a snap on plastic cap so th...
Page 157 - Do not touch with wet hands.
WARNING! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while drivingthe vehicle. • If this outlet is mishandled, it may cause anelectric shock and failure. CAUTION! • Many accessories that can be plugged in drawpower from the vehicle’s battery, even when not inuse (i...
Page 158 - POWER INVERTER — IF EQUIPPED
POWER INVERTER — IF EQUIPPED There is a 110-Volt, 150-Watt power inverter outlet lo-cated on the back of the center console to convert DCcurrent to AC current. This outlet can be used to powersmall appliances and electronics. Press the switch located in the center stack lower switchbank to turn the ...
Page 159 - To Avoid Serious Injury or Death:; Power Inverter Switch
NOTE: When the inverter switch is pressed, there will be a delay of approximately one second before theinverter status indicator turns ON. The status indicator ofthe AC power inverter indicates whether the inverter isproducing AC power. NOTE: Due to built in overload protection; the inverter will sh...
Page 160 - CUPHOLDERS; Front Cupholders
CUPHOLDERS In the center console, there are two cupholders for thefront seat passengers. The rear passengers have cupholders at the rear of thecenter console. Front Cupholders Rear Cupholders 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 161 - To open, press the latch and lift the cover.; Front Storage Compartment
STORAGE Front Storage Compartment The front storage compartment (located on the left side ofthe instrument panel) can hold cell phones, PDAs, andother small items. Console Storage Compartment To open, press the latch and lift the cover. Front Storage Compartment Center Console UNDERSTANDING THE FEAT...
Page 162 - Removable Storage Tray
The center console has a removable storage tray whichcan hold cell phones, PDAs, and other small items. CARGO AREA FEATURES Cargo Light The cargo area light is activated by opening the liftgate,opening any door, or by rotating the dimmer control onthe multifunction lever to the extreme top position....
Page 164 - Cargo Load Floor — If Equipped; Floor Panel
Cargo Load Floor — If Equipped The panel in the load floor is reversible for added utility.One side features a plastic lined tray which can hold avariety of items. The maximum load capacity of the loadfloor is 400 lbs (181 kg). The cargo load floor is held by spring loaded latches. Inorder to use th...
Page 165 - The sliding cargo load floor (Load N Go; Load Floor
2. Lift the cover. 3. Flip the cover over, and lock panel back into position. Rear Cargo Slide Out System (Load N Go 姞 ) — If Equipped The sliding cargo load floor (Load N Go 威 ) slides back and forth on steel tracks for convenience. The maximumload capacity is 400 lbs (181 kg). The floor panel can ...
Page 166 - Squeeze the right hand release handle.; Release Handle
2. Squeeze the right hand release handle. 3. Pull out the sliding panel. 4. Squeeze the right hand release handle to slide thepanel back into the vehicle. Release Handle Sliding Panel 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 168 - accessories to proved a func-
Rear Window Defroster — If Equipped The pushbutton for the rear window defroster islocated on the mode knob of the climate control switch bank. Press this button to turn on the rear windowdefroster and the electric remote control heated mirrors(optional). An amber light shows that the defroster is o...
Page 169 - Metal rails/crossbars; are offered by Mopar
NOTE: Metal rails/crossbars are offered by Mopar 威 accessories. See your authorized dealer. External racks do not increase the total load carryingcapacity of the vehicle. Be sure that the total occupantand luggage load inside the vehicle, plus the load on theluggage rack, do not exceed the maximum v...
Page 171 - UNDERSTANDING YOUR INSTRUMENT PANEL; Compass And Trip Computer — If Equipped . . 187
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instrument Panel Features . . . . . . . . . . . . . . . . 172 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . 173 䡵 Instrument Cluster Description . . . . . . . . . . . . 174 䡵 Compass And Trip Computer — If Equipped . . 187 ▫ Control But...
Page 174 - INSTRUMENT PANEL FEATURES
INSTRUMENT PANEL FEATURES 1 - Air Outlet 6 - Glove Compartment 11 - Hazard Warning Flasher 2 - Instrument Cluster 7 - Climate Control 12 - Electronic Stability Control / Traction Control Switch * 3 - Storage Tray 8 - Heated Seat Switch * 13 - Cigar Lighter / Power Outlet 4 - Center Air Outlet 9 - Re...
Page 175 - INSTRUMENT CLUSTER
INSTRUMENT CLUSTER UNDERSTANDING YOUR INSTRUMENT PANEL 173 4
Page 176 - INSTRUMENT CLUSTER DESCRIPTION; Fuel Door Reminder
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel GaugeThe fuel gauge shows level of fuel in tank when ignitionswitch is in the ON position. 2. Fuel Door Reminder This symbol indicates the side of the vehiclewhere the fuel cap is located. 3. Temperature GaugeThe temperature gauge shows engine coolant tempera-t...
Page 184 - Tire Pressure Monitoring Telltale Light
25. Tire Pressure Monitoring Telltale Light Each tire, including the spare (if provided),should be checked monthly, when cold andinflated to the inflation pressure recommendedby the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehiclehas tires of a different...
Page 186 - Some of the above warnings will be displayed in
26. Odometer/Trip OdometerThe odometer shows the total distance the vehicle hasbeen driven. The TRIP ODOMETER shows individual trip mileage. Totoggle between the odometer and the trip odometer,press the ODOMETER/TRIP ODOMETER button. Toreset the TRIP ODOMETER, press and hold the buttonwhile in trip ...
Page 187 - If the indicator message illuminates when you
U.S. federal regulations require that upon transfer ofvehicle ownership, the seller certify to the purchaser thecorrect mileage that the vehicle has been driven. There-fore, if the odometer reading is changed during repair orreplacement, be sure to keep a record of the readingbefore and after the se...
Page 189 - Compass/Trip Computer Display
30. Compass/Trip Computer or Electronic VehicleInformation Center (EVIC) Display — If EquippedWhen the appropriate conditions exist, this displayshows the Compass/Trip Computer or Electronic VehicleInformation Center (EVIC) messages. COMPASS AND TRIP COMPUTER — IFEQUIPPED The Compass/Trip Computer f...
Page 190 - Display Button
These messages can be manually turned off by pressingthe right button (on the instrument cluster). Control Buttons Press and release the odometer/trip odometer reset but-ton (right side of the instrument cluster) to access thecompass/trip computer displays. Trip Conditions Trip Odometer (ODO)This di...
Page 191 - Compass/Temperature Display; Keep magnetic materials away from the top of
Compass/Temperature Display Compass VarianceCompass Variance is the difference between MagneticNorth and Geographic North. To compensate for thedifferences, the variance should be set for the zone wherethe vehicle is driven, per the zone map. Once properlyset, the compass will automatically compensa...
Page 192 - The factory default zone is 8. During program-
NOTE: The factory default zone is 8. During program- ming, the zone value will wrap around from zone 15 tozone 1. Manual Compass CalibrationIf the compass appears erratic, inaccurate or abnormal,you may wish to calibrate the compass. Prior to calibrat-ing the compass, make sure the proper zone is se...
Page 193 - Electronic Vehicle Information Center (EVIC)
ELECTRONIC VEHICLE INFORMATION CENTER(EVIC) — IF EQUIPPED The Electronic Vehicle Information Center (EVIC) fea-tures a driver-interactive display that is located in theinstrument cluster. This system conveniently allows the driver to select avariety of useful information by pressing the switchesmoun...
Page 195 - Oil Change Required
• Left/right front door ajar (one or more, with a singlechime if speed is above 1 mph/1 km/h) • Left/right rear door ajar (one or more, with a singlechime if speed is above 1 mph/1 km/h) • Door(s) ajar (with a single chime if vehicle is inmotion) • Liftgate ajar (with a single chime) • Left front lo...
Page 196 - Trip Functions; Average fuel economy
1. Turn the ignition switch to the ON position. (Do notstart the engine). 2. Fully depress the accelerator pedal slowly three timeswithin 10 seconds. 3. Turn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the engine, the oil change indicator s...
Page 197 - Compass Display
NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance ofthe vehicle, regardless of the DTE displayed value. When the DTE value is less than 30 miles (48 km)estimated driving distance, the DTE display will changeto a text display of LOW FUEL. T...
Page 199 - Magnetic materials should be kept away from
Compass VarianceCompass variance is the difference between magneticNorth and geographic North. In some areas of thecountry, the difference between magnetic and geographicNorth is great enough to cause the compass to give falsereadings. For the most accurate compass performance,the compass variance m...
Page 200 - Press and release the COMPASS button to exit.
4. Press and release the FUNCTION SELECT buttonuntil the proper variance zone is selected according to themap. 5. Press and release the COMPASS button to exit. Personal Settings (Customer-ProgrammableFeatures) Personal Settings allows the driver to set and recallfeatures when the transmission is in ...
Page 202 - REQ Radio
Delay Power Off to Accessories Until ExitWhen this feature is selected, the power windowswitches, radio, hands–free system (if equipped), DVDvideo system (if equipped), power sunroof (if equipped),and power outlets will remain active for up to 60 minutesafter the ignition switch is turned off. Openi...
Page 203 - Operating Instructions - Radio Mode; The ignition switch must be in the ON or ACC; Voice Recognition Button (UConnect; Communication (UConnect
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary)Push the ON/VOLUME control knob to turn on theradio. Press the ON/VOLUME control knob a secondtime to turn off the radio. Electronic Volume Contro...
Page 204 - Phone Button (UConnect; Clock Setting Procedure; Press and hold the TIME button until the hours blink.
Phone Button (UConnect 威 Hands-Free Phone) — If EquippedPress this button to operate the Hands-Free Phone(UConnect 威 ) feature (if equipped). Refer to “Hands-Free Communication (UConnect 威 )” in Section 3. If your vehicle is not equipped with or this feature is notavailable on your vehicle, a “Not E...
Page 210 - The user will have to set these defaults before
NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings aftera disc is loaded, changes will not be effective. Also, thedefaults are effective only if the disc supports thecustomer-preferred settings. AM and FM ButtonsPress the buttons to select AM ...
Page 213 - Notes On Playing MP3/WMA Files
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however, acceptableMP3/WMA file recording media and formats are limited.When writing MP3/WMA files, pay attention to thefollowing restrictions. Supported Media (Disc Types)The MP3/WMA file recording media supported by theradio are CDDA...
Page 219 - To Manually Set the Clock — RER/REN; Touch the screen where the time is displayed.
To Manually Set the Clock — RER/REN 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed. 3. Touch the screen where “User Clock” is displayed. Theclock setting menu will appear on the screen. 4. To move the hour forward, touch the screen where theword “Hour” with the arr...
Page 220 - Changing the Time Zone; Touch the screen where the word “Save” is displayed.
Show Time if Radio is OffWhen selected, this feature will display the time of dayon the touch screen when the multimedia system isturned off. Proceed as follows to change the currentsetting: 1. Turn on the multimedia system. 2. Touch the screen where the time is displayed. Theclock setting menu will...
Page 221 - Operating Instructions — Radio Mode; RES Radio
SALES CODE RES — AM/FM STEREO RADIOWITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Ro...
Page 225 - EJECT Button - Ejecting a CD; Press the EJECT button to eject the CD.
CAUTION! • This CD player will accept 4-3/4 in (12 cm) discsonly. The use of other sized discs may damage theCD player mechanism. • Do not use adhesive labels. These labels can peelaway and jam the player mechanism. • RES is a single CD player. Do not attempt to inserta second CD if one is already l...
Page 226 - Notes on Playing MP3 Files
RW/FFPress the RW button to stop the CD at the beginning ofthe current CD track/title. Press and hold the FF (Fast Forward) button and the CDplayer will begin to fast forward until FF is released, orRW or another CD button is pressed. The RW (Reverse)button works in a similar manner. AM/FM ButtonPre...
Page 228 - Layer 3
rates (VBR) are also supported. The majority of MP3 filesuse a 44.1 kHz sampling rate and a 192, 160, 128, 96 orVBR bit rate. MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224,192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer ...
Page 229 - Operation Instructions - Auxiliary Mode; The AUX device must be turned on and the
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, whichallows the user to plug in a portable device, such as anMP3 player, or cassette player, and utilize the vehicle’saudio system to amplify the source and play through thevehicle speakers. Pressing the DISC/AU...
Page 237 - Notes On Playing MP3 Files
TIME ButtonPress this button to change the display from a large CDplaying time display to a small CD playing time display. RW/FFPress the RW button to stop the CD at the beginning ofthe current CD track/title. Press and hold FF (Fast Forward) and the CD player willbegin to fast forward until FF is r...
Page 239 - cation
Supported MP3 File FormatsThe radio will recognize only files with the *.MP3 exten-sion as MP3 files. Non-MP3 files named with the *.MP3extension may cause playback problems. The radio isdesigned to recognize the file as an invalid MP3 and willnot play the file. When using the MP3 encoder to compres...
Page 242 - System Activation
SATELLITE RADIO — IF EQUIPPED(REN/REQ/RER/RES/REU RADIOS ONLY) Satellite radio uses direct satellite-to-receiver broadcast-ing technology to provide clear digital sound, coast tocoast. The subscription service provider is Sirius SatelliteRadio. This service offers over 130 channels of music,sports, ...
Page 243 - Selecting Satellite Mode; Press the SAT button until; Satellite Antenna
Sirius ID number will display. The Sirius ID numberdisplay will time out in two minutes. Press any button onthe radio to exit this screen. ESN/SID Access With REN/RER RadiosWhile in SAT mode, press the MENU button on the radiofaceplate. Next, touch the SUBSCRIPTION tab on the touch screen.All the ES...
Page 247 - Refer to “Hands-Free Communication (UConnect; Overhead Display Screen
Buttons 1 - 6These buttons tune the radio to the channels that youcommit to pushbutton memory (12 Satellite stations). Operating Instructions — Hands-Free Phone (IfEquipped) Refer to “Hands-Free Communication (UConnect 威 )” in Section 3. Operating Instructions — Video EntertainmentSystem (VES)™ (If ...
Page 250 - CLIMATE CONTROLS
5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may becometoo high. NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e. scratched, reflectivecoating removed, a hair, moisture...
Page 251 - Blower Control; For vehicles equipped with Remote Start, the; Temperature Control; If your air conditioning performance seems
Blower Control Use this control to regulate theamount of air forced through the sys-tem in any mode you select. The fanspeed increases as you turn the outercontrol ring to the right from the OFFposition. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Rem...
Page 252 - Mode Control; tion you receive from that mode.
Mode Control The mode control allows you tochoose from several patterns of airdistribution. You can select either aprimary mode, as identified by thesymbols, or a blend of two of thesemodes. The closer the control is to aparticular mode, the more air distribu- tion you receive from that mode. Panel ...
Page 254 - Operating Tips
Operating Tips Window FoggingWindows will fog on the inside when the humidity insidethe vehicle is high. This often occurs in mild or cooltemperatures when it’s rainy or humid. In most cases,turning on the air conditioning (pressing the “Snow-flake” button) will clear the fog. Adjust the temperature...
Page 257 - STARTING AND OPERATING
STARTING AND OPERATING CONTENTS 䡵 Starting Procedures . . . . . . . . . . . . . . . . . . . . 259 ▫ Normal Starting . . . . . . . . . . . . . . . . . . . . . 259 ▫ Extreme Cold Weather (Below –20°F Or–29°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259 ▫ If Engine Fails To Start . . . ...
Page 261 - Normal starting of either a cold or a warm; Extreme Cold Weather (below –20°F or –29°C)
STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust bothinside and outside mirrors, and fasten your seat belts. WARNING! Do not leave children or animals inside parkedvehicles in hot weather. Interior heat build up maycause serious injury or death. Start the engine with the sh...
Page 262 - If Engine Fails to Start
If Engine Fails to Start WARNING! • Never pour fuel or other flammable liquids intothe throttle body air inlet opening in an attempt tostart the vehicle. This could result in a flash firecausing serious personal injury. (Continued) WARNING! (Continued) • Do not attempt to push or tow your vehicle to...
Page 265 - Brake/Transmission Interlock System
CAUTION! (Continued) • Shift into or out of REVERSE only after thevehicle has come to a complete stop and the engineis at idle speed. • Do not shift from REVERSE, PARK, or NEUTRALinto any forward gear when the engine is aboveidle speed. • Before shifting into any gear, make sure your footis firmly o...
Page 266 - Brake/Transmission Interlock Manual Override; Move the shift lever into the NEUTRAL position.; Interlock Manual Override
Brake/Transmission Interlock Manual Override Your vehicle may be equipped with a shift lock manualoverride. The manual override may be used in the eventthat the shift lever should fail to move from PARK withthe key in the ON position and the brake pedal de-pressed. To operate the shift lock manual o...
Page 267 - Shift Lever
4–Speed Automatic Transmission (3.7L Engine) NOTE: Under extreme cold temperatures (-6°F (-21°C) and when in DRIVE, transmission operation may bebriefly limited to only 2nd gear operation. Normal op-eration will resume once the transmission temperaturehas risen to a suitable level. Shifting from DRI...
Page 270 - If the vehicle is started in extremely cold tem-
NOTE: If the vehicle is started in extremely cold tem- peratures, the transmission may not shift into OVER-DRIVE and will automatically select the most desirablegear for operation at this temperature. Normal operationwill resume when the transmission fluid temperature hasrisen to a suitable level. R...
Page 273 - Gear Ranges; After selecting any gear range, wait a moment to
Gear Ranges NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating.This is especially important when the engine is cold. Ifthere is a need to restart the engine, be sure to cycle thekey to the LOCK position before restarting. Transmissiongear eng...
Page 277 - MP 143 Single-Speed Part-Time Transfer Case; Transfer Case Switch
• If the vehicle has not been driven in several days, thefirst few seconds of operation after shifting the trans-mission into gear may seem sluggish. This is due to thefluid partially draining from the torque converter intothe transmission. This condition is normal and will notcause damage to the tr...
Page 279 - WD LOCK
2WD ⇔ 4WD LOCK Rotate the 4WD Control Switch to the desired position.Shifts between 2WD and 4WD LOCK can be done withthe vehicle stopped or in motion. With the vehicle inmotion, the transfer case will engage/disengage faster ifyou momentarily release the accelerator pedal after turn-ing the control ...
Page 281 - Driving In Snow, Mud and Sand
Flowing WaterIf the water is swift flowing and rising (as in stormrun-off) avoid crossing until the water level recedesand/or the flow rate is reduced. If you must crossflowing water, avoid depths in excess of nine inches. Theflowing water can erode the streambed causing yourvehicle to sink into dee...
Page 282 - Hill Climbing; Before attempting to climb a hill, determine the; Before climbing a steep hill,; shift the transmission to a; If you stall or begin to lose headway; while climbing a
Hill Climbing NOTE: Before attempting to climb a hill, determine the conditions at the crest and/or on the other side. Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4L or 4LO. Usefirst gear and 4L or 4LO for very steep hills. If you stall or begi...
Page 284 - POWER STEERING; Increased noise levels at the end of the steering
WARNING! Abrasive material in any part of the brakes may causeexcessive wear or unpredictable braking. You mightnot have full braking power when you need it toprevent an accident. If you have been operating yourvehicle in dirty conditions, get your brakes checkedand cleaned as necessary. • If you ex...
Page 285 - Power Steering Fluid Check
WARNING! Continued operation with reduced power steeringassist could pose a safety risk to yourself and others.Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the endof the steering wheel travel will increase the steeringfluid temperature and it...
Page 286 - PARKING BRAKE; The instrument cluster “Brake Warning Light”; Parking Brake
PARKING BRAKE To set the parking brake, pull the lever up as firmly aspossible. When the parking brake is applied with theignition ON, the “Brake Warning Light” in the instru-ment cluster will light. To release the parking brake, pullup slightly, press the center button, then lower the levercomplete...
Page 287 - ANTI-LOCK BRAKE SYSTEM
WARNING! • Always apply the parking brake fully when leav-ing your vehicle or it may roll and cause damage orinjury. Also, be certain to leave the transmission inthe PARK position. Failure to do so may allow thevehicle to roll and cause damage or injury. • Leaving unattended children in a vehicle is...
Page 289 - During severe braking conditions, a pulsing
WARNING! (Continued) • The capabilities of an ABS equipped vehicle mustnever be exploited in a reckless or dangerousmanner, which could jeopardize the user’s safetyor the safety of others. CAUTION! The Anti-Lock Brake System (ABS) is subject topossible detrimental effects of electronic interferencec...
Page 290 - ELECTRONIC BRAKE CONTROL SYSTEM
• Do not drive too fast for road conditions, especiallywhen roads are wet or slushy. A wedge of water canbuild up between the tire tread and the road. Thishydroplaning action can cause loss of traction, brakingability, and control. • After going through deep water or a car wash, brakesmay become wet...
Page 294 - ESP/TCS Indicator Light
Electronic Stability Program (ESP) This system enhances directional control and stability ofthe vehicle under various driving conditions. ESP cor-rects for over/under steering of the vehicle by applyingthe brake of the appropriate wheel to assist in counter-acting the over/under steer condition. Eng...
Page 296 - ESP Off Switch
Partial OffThis mode is entered by momentarily depressing the ESPOFF switch (located in the center stack lower switchbank). When in “Partial Off” mode, the TCS portion ofESP, except for the “limited slip” feature described in theTCS section, has been disabled and the “ESP/TCS Indi-cator Light” will ...
Page 298 - is absent from this tire
TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S.design standards. P-Metric tires have the letter “P”molded into the sidewall preceding the size designa-tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on Europeandesign standards. ...
Page 300 - Tire Sizing Chart; = Passenger car tire based on European design standards
Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = S...
Page 301 - — A numerical code associated with the maximum load a tire can carry; Light Load
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding toits load index under certain operating conditions— The maximum speed correspo...
Page 302 - DOT; = Department of Transportation; MA; = Code representing the tire manufacturing location (two digits); ABCD; —03 means the 3rd week.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire,however, the date code may only be on one side. Tireswith white sidewalls will have the full TIN, including thedate code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of bl...
Page 303 - The proper cold tire inflation pressure is listed; Tire and Loading Information Placard
Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information aboutthe:1) number of people that can be carried in the vehicle2) total weight...
Page 311 - Limited-Use Spare — If Equipped
WARNING! Temporary use spare tires are for emergency use only.With these tires, do not drive more than 50 mph(80 km/h). Temporary use spare tires have limitedtread life. When the tread is worn to the tread wearindicators, the temporary use spare tire needs to bereplaced. Be sure to follow the warnin...
Page 312 - Tire Spinning
WARNING! The limited-use spare tires are for emergency useonly. Installation of this limited-use spare tire affectsvehicle handling. With this tire, do not drive morethan 50 mph (80 km/h). Keep inflated to the cold tireinflation pressure listed on either your tire placard orlimited-use spare tire an...
Page 313 - Driving style
Tread Wear Indicators Tread wear indicators are in the original equipment tiresto help you in determining when your tires should bereplaced. These indicators are molded into the bottom of the treadgrooves. They will appear as bands when the tread depthbecomes 1/16 in (2 mm). When the indicators appe...
Page 314 - Replacement Tires
WARNING! Tires and the spare tire should be replaced after sixyears, regardless of the remaining tread. Failure tofollow this warning can result in sudden tire failure.You could lose control and have an accident resultingin serious injury or death. Keep dismounted tires in a cool, dry place with as ...
Page 316 - TIRE CHAINS; Chains must be the proper size for the vehicle as
TIRE CHAINS Use “Class S” chains or other traction aids that meet SAEType “S” specifications. NOTE: Chains must be the proper size for the vehicle as recommended by the chain manufacturer. CAUTION! To avoid damage to your vehicle, tires or chains,observe the following precautions: • Because of limit...
Page 317 - TIRE ROTATION RECOMMENDATIONS
These cautions apply to all chain traction devices, includ-ing link and cable (radial) chains. Tire chain use is permitted only on the rear tires. NOTE: The use of class “S” chains is permitted with P235/65R17 and P225/75R16 tires. CAUTION! Do not use tire chains on vehicles equipped withtires other...
Page 318 - The premium Tire Pressure Monitor System will
These effects can be reduced by timely rotation of tires.The benefits of rotation are especially worthwhile withaggressive tread designs such as those on On/Off-Roadtype tires. Rotation will increase tread life, help to main-tain mud, snow, and wet traction levels, and contribute toa smooth, quiet r...
Page 319 - − For example, your vehicle may have a recom-
The tire pressure will also increase as the vehicle isdriven. This is normal and there should be no adjust-ment for this increased pressure. • The TPMS will warn the driver of a low tire pressureif the tire pressure falls below the low-pressure warn-ing limit for any reason, including low temperatur...
Page 321 - Base System; It is particularly important for you to check the; Tire Pressure Monitoring Low Pressure Warnings
• Seasonal temperature changes will affect tire pressure,and the TPMS will monitor the actual tire pressure inthe tire. Base System The Tire Pressure Monitor System (TPMS) uses wirelesstechnology with wheel rim mounted electronic sensors tomonitor tire pressure levels. Sensors, mounted to eachwheel ...
Page 323 - Premium System — If Equipped
NOTE: Vehicles with Compact Spare1. The compact spare tire does not have a tire pressuremonitoring sensor. Therefore, the TPMS will not monitorthe pressure in the compact spare tire.2. If you install the compact spare tire in place of a roadtire that has a pressure below the low-pressure warninglimi...
Page 324 - Tire Pressure Monitoring Telltale light
• Three Trigger modules (mounted in three of the fourwheel-wells) • Various Tire Pressure Monitoring System messages,which display in the Electronic Vehicle InformationCenter (EVIC) • Tire Pressure Monitoring Telltale light The matching full size spare wheel and tire assembly (ifequipped) has a tire...
Page 328 - FUEL REQUIREMENTS
General Information This device complies with Part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions: • This device may not cause harmful interference. • This device must accept any interference received,including interference that may cause undesired...
Page 329 - Reformulated Gasoline
4.0L Engine The 4.0L engine is designed to meet allemissions regulations and provide satisfac-tory fuel economy and performance whenusing high quality unleaded gasoline hav-ing an octane range of 87 to 89. The manu-facturer recommends the use of 89 octane for optimum performance. The use of premium ...
Page 330 - Gasoline/Oxygenate Blends; operate in a lean mode
The manufacturer supports the use of reformulated gaso-lines. Properly blended reformulated gasolines will pro-vide excellent performance and durability of engine andfuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy-genates such as 10% ethanol, MT...
Page 331 - MMT In Gasoline
To fix a Non-FFV vehicle inadvertently fueled once withE-85 perform the following: • drain the fuel tank (see your authorized dealer) • change the engine oil and oil filter • disconnect and reconnect the battery to reset theengine controller memory More extensive repairs will be required for prolong...
Page 332 - Fuel System Cautions; Intentional tampering with emissions control; Carbon Monoxide Warnings
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’sperformance: • The use of leaded gas is prohibited by Federal law.Using leaded gasoline can impair engine performanceand damage the emission control system. • An out-of-tune engine or certain fuel or ignition mal-functio...
Page 333 - ADDING FUEL; Fuel Filler Cap
stopped in an open area with the engine running formore than a short period, adjust the ventilation systemto force fresh, outside air into the vehicle. • Guard against carbon monoxide with proper mainte-nance. Have the exhaust system inspected every timethe vehicle is raised. Have any abnormal condi...
Page 338 - loaded and
Improper weight distributions can have an adverse affecton the way your vehicle steers and handles, and the waythe brakes operate. CAUTION! Do not load your vehicle any heavier than the GVWRor the maximum front and rear GAWR. If you do,parts on your vehicle can break, or it can change theway your ve...
Page 339 - ance for the presence of a driver.
measure GTW is to put your fully loaded trailer on avehicle scale. The entire weight of the trailer must besupported by the scale. WARNING! If the gross trailer weight is 3,500 lbs (1 587 kg) ormore, it is mandatory to use a weight-distributinghitch to ensure stable handling of your vehicle. Ifyou u...
Page 342 - Improper Adjustment of Weight-Distributing Hitch
With Weight-Distributing Hitch (Correct) Improper Adjustment of Weight-Distributing Hitch (Incorrect) 340 STARTING AND OPERATING
Page 344 - Trailer Towing Weights (Maximum Trailer Weight Ratings); Transmission; Refer to local laws for maximum trailer towing speeds.; The trailer tongue weight must be considered as
Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Transmission Model Frontal Area Max GTW (Gross Trailer Wt) Tongue Wt. (See Note) 3.7L/Automatic 4x2 32 sq ft (2.97 sq m) 2,000 lbs (907 k...
Page 346 - Trailer and Tongue Weight; The tongue weight of the trailer.
Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight inthe front of the trailer. This places 10% to 15% of theGross Trailer Weight (GTW) on the tow hitch of yourvehicle. Loads balanced over the wheels or heavier in therear can cause the trailer to sway severely from side-to-...
Page 347 - Remember that everything put into or on the; Towing Requirements
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additionalfactory-installed options or authorized dealer-installedoptions must be considered as part of the total load onyour vehicle. Refer to the tire and loading informationplacard in the Tire Safety...
Page 350 - Do not cut or splice wiring into the vehicles
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg)loaded, it should have its own brakes and theyshould be of adequate capacity. Failure to do thiscould lead to accelerated brake lining wear, higherbrake pedal effort, and longer stopping distances. WARNING! Do not connect trailer brakes to y...
Page 352 - Towing Tips; − Do not use in hilly terrain or with heavy loads.
Towing Tips Before setting out on a trip, practice turning, stoppingand backing up the trailer in an area away from heavytraffic. Towing Tips — Automatic TransmissionThe “D” range can be selected when towing. However, iffrequent shifting occurs while in this range, the TOW/HAUL button should be sele...
Page 353 - − Refer to “Cooling System Operating” information in; Towing — 2WD Models; This vehicle may be towed on a flatbed or
Towing Tips — Cooling SystemTo reduce potential for engine and transmission over-heating, take the following actions: − City DrivingWhen stopped for short periods of time, put the trans-mission in NEUTRAL and increase engine idle speed. − Highway DrivingReduce speed. − Air ConditioningTurn off tempo...
Page 354 - Towing — 4WD or All-Wheel Drive Models
Towing — 4WD or All-Wheel Drive Models CAUTION! Front or rear wheel lifts should not be used. Internaldamage to the transmission or transfer case will occurif a front or rear wheel lift is used when recreationaltowing. Recreational towing (all four wheels on theground)Recreational towing is NOT allo...
Page 355 - WHAT TO DO IN EMERGENCIES
WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Flasher . . . . . . . . . . . . . . . . . 354 䡵 If Your Engine Overheats . . . . . . . . . . . . . . . . 355 䡵 Jacking And Tire Changing . . . . . . . . . . . . . . . 356 ▫ Jack Location . . . . . . . . . . . . . . . . . . . . . . . 356 ▫ Spare Tir...
Page 356 - HAZARD WARNING FLASHER; With extended use, the Hazard Warning flasher; Hazard Warning Switch
HAZARD WARNING FLASHER The Hazard Warning Flasher switch is located on thelower switch bank below the climate controls. To operate the Hazard Warning flasher, press the switchand all front and rear directional signals will flashintermittently. Press the switch a second time to turn offthe flashers. ...
Page 357 - IF YOUR ENGINE OVERHEATS; On the highways — slow down.
IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce thepotential for overheating your engine by taking theappropriate action. • On the highways — slow down. • In city traffic — while stopped, put transmission inNEUTRAL, but do not increase engine idle speed. NOTE: There are s...
Page 358 - Jack Storage Location
JACKING AND TIRE CHANGING WARNING! • Getting under a jacked-up vehicle is dangerous.The vehicle could slip off the jack and fall on you.You could be crushed. Never get any part of yourbody under a vehicle that is on a jack. If you needto get under a raised vehicle, take it to a servicecenter where i...
Page 359 - Spare Tire Removal; Lowering/Raising Spare Tire
Spare Tire Removal Fit the jack handle extension over the drive nut. Use thelug wrench to rotate the nut counterclockwise until thespare is on the ground with enough slack in the cable toallow you to pull the tire out from under the vehicle. CAUTION! The winch mechanism is designed for use with thej...
Page 360 - Preparations For Jacking; Turn the ignition to the LOCK position.; Jacking Instructions
Preparations For Jacking 1. Park the vehicle on a firm level surface. Avoid icy orslippery areas. WARNING! Do not attempt to change a tire on the side of thevehicle close to moving traffic. Pull far enough offthe road to avoid being hit when operating the jackor changing the wheel. 2. Set the parkin...
Page 361 - Jack Warning Label
WARNING! (Continued) • Set the parking brake firmly and set an automatictransmission in PARK; a manual transmission inREVERSE. • Never start or run the engine with the vehicle on ajack. • Do not let anyone sit in the vehicle when it is on ajack. • Do not get under the vehicle when it is on a jack. •...
Page 363 - Lower the jack to its fully closed position.
WARNING! Raising the vehicle higher than necessary can makethe vehicle less stable and cause an accident. It couldslip off the jack and hurt someone near it. Raise thevehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. 7. Position the spare wheel/tire on the vehicle and install...
Page 365 - Any procedure other than above could result in:
5. Connect the other cable, first to the negative terminalof the booster battery and then to the engine of thevehicle with the discharged battery. Make sure you havea good contact on the engine. WARNING! • Do not connect the cable to the negative post of thedischarge battery. The resulting electrica...
Page 366 - TOWING A DISABLED VEHICLE; The transmission must be in NEUTRAL under; Towing the vehicle with the rear wheels on the; -Wheel Drive Vehicles
TOWING A DISABLED VEHICLE Proper towing or lifting equipment is required to preventdamage to your vehicle. Use of safety chains is recom-mended. Attach towing device to main structural mem-bers of the vehicle not to bumpers or associated brack-ets. State and local laws applying to vehicles under tow...
Page 367 - MAINTAINING YOUR VEHICLE
MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.7L . . . . . . . . . . . . . 367 䡵 Engine Compartment — 4.0L . . . . . . . . . . . . . 368 䡵 Onboard Diagnostic System — OBD II . . . . . . . 369 ▫ Loose Fuel Filler Cap Message . . . . . . . . . . . 370 䡵 Emissions Inspection And Maintenanc...
Page 369 - ENGINE COMPARTMENT — 3.7L
ENGINE COMPARTMENT — 3.7L 1 — Air Cleaner Filter 6 — Washer Fluid Reservoir 2 — Engine Oil Dipstick 7 — Engine Coolant Reservoir 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Integrated Power Module 9 — Coolant Pressure Cap 5 — Battery MAINTAINING YOUR VEHICLE 367 7
Page 370 - ENGINE COMPARTMENT — 4.0L
ENGINE COMPARTMENT — 4.0L 1 — Air Cleaner Filter 6 — Engine Oil Fill 2 — Engine Oil Dipstick 7 — Washer Fluid Reservoir 3 — Brake Fluid Reservoir 8 — Engine Coolant Reservoir 4 — Integrated Power Module 9 — Coolant Pressure Cap 5 — Battery 368 MAINTAINING YOUR VEHICLE
Page 371 - ONBOARD DIAGNOSTIC SYSTEM — OBD II
ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated OnboardDiagnostic system called OBD II. This system monitorsthe performance of the emissions, engine, and automatictransmission control systems. When these systems areoperating properly, your vehicle will provide excell...
Page 372 - Loose Fuel Filler Cap Message; clicking
Loose Fuel Filler Cap Message After fuel is added, the vehicle diagnostic system candetermine if the fuel filler cap is possibly loose, improp-erly installed, or damaged. A loose fuel filler cap messagewill be displayed in the instrument cluster. Tighten thegas cap until a ⬙ clicking ⬙ sound is hear...
Page 373 - Insert your ignition key into the ignition switch.
Your vehicle has a simple ignition key-actuated test,which you can use prior to going to the test station. Tocheck if your vehicle’s OBD II system is ready, you mustdo the following: 1. Insert your ignition key into the ignition switch. 2. Turn the ignition to the ON position, but do not crankor sta...
Page 374 - REPLACEMENT PARTS; Use of genuine MOPAR; DEALER SERVICE
Regardless of whether your vehicle’s OBD II system is readyor not, if the MIL is illuminated during normal vehicleoperation you should have your vehicle serviced beforegoing to the I/M station. The I/M station can fail yourvehicle because the MIL is on with the engine running. REPLACEMENT PARTS Use ...
Page 376 - Under no circumstances should oil change in-
Change Engine OilRefer to the Maintenance Schedule in Section 8 for theproper maintenance intervals. NOTE: Under no circumstances should oil change in- tervals exceed 6,000 miles (10 000 km) or 6 months,whichever comes first. Engine Oil SelectionFor best performance and maximum protection for alleng...
Page 378 - Engine Air Cleaner Filter; engine air
NOTE: For best access to the oil filter, a drive on hoist should be used instead of a chassis hoist (3.7L Only). Engine Oil Filter SelectionAll of the manufacturer’s engines have a full-flow typedisposable oil filter. Use a filter of this type for replace-ment. The quality of replacement filters var...
Page 379 - Maintenance-Free Battery
Maintenance-Free Battery The top of the maintenance-free battery is permanentlysealed. You will never have to add water, nor is periodicmaintenance required. WARNING! • Battery acid is a corrosive acid solution and canburn or even blind you. Do not allow battery fluidto contact your eyes, skin, or c...
Page 380 - Air Conditioner Maintenance; Use only manufacturer approved A/C system
Air Conditioner Maintenance For best possible performance, your air conditionershould be checked and serviced by an authorized dealerat the start of each warm season. This service shouldinclude cleaning of the condenser fins and a performancetest. Drive belt tension should also be checked at thistim...
Page 381 - Body Lubrication; Spray White Lube to assure quiet, easy opera-; Windshield Wiper Blades
Body Lubrication Locks and all body pivot points, including such items asseat tracks, door hinge pivot points and rollers, liftgate,tailgate, sliding doors and hood hinges, should be lubri-cated periodically with a lithium based grease such asMOPAR 威 Spray White Lube to assure quiet, easy opera- tio...
Page 382 - Exhaust System
WARNING! Commercial windshield washer solvents are flam-mable. They could ignite and burn you. Care must beexercised when filling or working around the washersolution. Exhaust System The best protection against carbon monoxide entry intothe vehicle body is a properly maintained engine exhaustsystem....
Page 384 - Cooling System
To minimize the possibility of catalytic converter dam-age: • Do not shut off the engine or interrupt the ignitionwhen the transmission is in gear and the vehicle is inmotion. • Do not try to start the engine by pushing or towing thevehicle. • Do not idle the engine with any spark plug wiresdisconne...
Page 389 - Points to Remember; When the vehicle is stopped after a few miles/
When additional engine coolant (antifreeze) is needed tomaintain the proper level, it should be added to thecoolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor comingfrom the front of the engine compa...
Page 390 - Brake System
• Do not change the thermostat for Summer or Winteroperation. If replacement is ever necessary, install onlythe correct type thermostat. Other designs may resultin unsatisfactory cooling performance, poor gas mile-age, and increased emissions. Brake System In order to assure brake system performance...
Page 391 - Automatic Transmission
WARNING! • Overfilling the brake fluid reservoir can result inspilling brake fluid on hot engine parts and thebrake fluid catching fire. • Use of a brake fluid that may have a lower initialboiling point or unidentified as to specification,may result in sudden brake failure during hardprolonged braki...
Page 392 - Transfer Case
Selection of LubricantIt is important that the proper lubricant is used in thetransmission to assure optimum transmission perfor-mance. Use only manufacturer’s recommended transmis-sion fluid. Refer to “Fluids, Lubricants, and GenuineParts” in this section for the correct fluid type. It isimportant ...
Page 393 - Front/Rear Axle Fluid
Adding FluidFluid should be added only at filler hole until fluidbegins to run out of the hole. DrainFirst remove fill plug (B), then drain plug (C). Recom-mended tightening torque for drain and fill plugs is15–25 ft lbs (20–34 N·m). CAUTION! When replacing plugs, do not overtighten. You coulddamage...
Page 394 - Appearance Care And Protection From Corrosion; The most common causes are:
Adding FluidAdd lubricant only at the fill hole and only to the levelspecified above. Selection of LubricantUse only manufacturer’s recommended fluid. Refer to“Fluids, Lubricants, and Genuine Parts” in this sectionfor the correct fluid type. Appearance Care And Protection From Corrosion Protection O...
Page 395 - Washing; Car Wash or a mild; Special Care
Washing • Wash your vehicle regularly. Always wash your ve-hicle in the shade using MOPAR 威 Car Wash or a mild car wash soap, and rinse the panels completely withclear water. • If insects, tar, or other similar deposits have accumu-lated on your vehicle, use MOPAR 威 Super Kleen Bug and Tar Remover t...
Page 398 - If the seat belts need cleaning, use MOPAR; FUSES
Cleaning Plastic Instrument Cluster LensesThe lenses in front of the instruments in this vehicle aremolded in clear plastic. When cleaning the lenses, caremust be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may beused, but do not use high alcohol content...
Page 406 - Left Front Turn Signal; Twist the bulb counter clockwise to remove.; Access Door
5. Disconnect the electrical connector and replace thebulb. Left Front Turn Signal 1. Turn the steering wheel all the way to the right (fullright lock). 2. Remove the door in the left wheel liner by twistingcounter clockwise. Access to the bulb can be gainedthrough the wheel liner hole. 3. Disconnec...
Page 408 - Pull the backplate straight back from the lamp housing.; Push Pins
CAUTION! Do not touch the new bulb with your fingers. Oilcontamination will severely shorten bulb life. If thebulb comes in contact with any oily surface, clean thebulb with rubbing alcohol. Rear Tail, Stop, Turn Signal, and Backup Lights 1. Open the lift gate. 2. Remove the two push pins. 3. Pull l...
Page 409 - Remove the two screws securing the CHMSL.; Screw Locations
6. Disconnect the electrical connector. 7. Remove the bulb from the backplate. Center High Mounted Stop Light (CHMSL) 1. Remove the two screws securing the CHMSL. 2. Disconnect the electrical connector and washer hose (ifequipped) from the CHMSL. 3. Replace the CHMSL. Screw Locations MAINTAINING YOU...
Page 410 - Quarts
FLUID CAPACITIES U.S. Metric Fuel (Approximate) 19.5 Gallons 73.8 Liters Engine Oil with Filter3.7 Liter Engine (SAE 5W-20, API Certified) 5 Quarts 4.7 Liters 4.0 Liter Engine (SAE 10W-30, API Certified) 5.5 Quarts 5.2 Liters Cooling System *3.7 Liter Engine (MOPAR 威 Antifreeze/Engine Coolant 5 Year...
Page 413 - MAINTENANCE SCHEDULES
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance . . . . . . 412 䡵 Maintenance Schedule . . . . . . . . . . . . . . . . . . 412 ▫ Required Maintenance Intervals . . . . . . . . . . 414 8 M A I N TE N A N C E SC H E DU LE S
Page 414 - EMISSIONS CONTROL SYSTEM MAINTENANCE; Maintenance, replacement or repair of the emis-; MAINTENANCE SCHEDULE
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold typemust be done at the times or mileages specified to ensurethe continued proper functioning of the emissions controlsystem. These and all other maintenance services in-cluded in this manual, should be done to pr...
Page 415 - At Each Stop for Fuel
NOTE: • The oil change indicator message will not monitor thetime since the last oil change. Change your vehicles oilif it has been 6 months since your last oil change evenif the oil change indicator message is NOT illumi-nated. • Change your engine oil more often if you drive yourvehicle off-road f...
Page 416 - Required Maintenance Intervals
Once a Month • Check tire pressure and look for unusual wear ordamage. • Inspect the battery and clean and tighten the terminalsas required. • Check the fluid levels of coolant reservoir, brakemaster cylinder, and transmission and add as needed. • Check all lights and other electrical items for corr...
Page 429 - IF YOU NEED CONSUMER ASSISTANCE; MOPAR
IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For YourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 ▫ Prepare For The Appointment . . . . . . . . . . . . 429 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . 429 ▫ Be Reasonable Wi...
Page 432 - Chrysler LLC Customer Center
This is why you should always talk to an authorizeddealer’s service manager first. Most matters can be re-solved with this process. • If for some reason you are still not satisfied, talk to thegeneral manager or owner of the authorized dealer-ship. They want to know if you need assistance. • If an a...
Page 433 - Service Contract
Customer Assistance For The Hearing Or SpeechImpaired (TDD/TTY) To assist customers who have hearing difficulties, themanufacturer has installed special TDD (Telecommuni-cation Devices for the Deaf) equipment at its CustomerCenter. Any hearing or speech impaired customer, whohas access to a TDD or a...
Page 434 - Mopar; REPORTING SAFETY DEFECTS
WARNING! Engine exhaust, some of its constituents, and certainvehicle components contain, or emit, chemicalsknown to the State of California to cause cancer andbirth defects or other reproductive harm. In addition,certain fluids contained in vehicles and certain prod-ucts of component wear contain, ...
Page 435 - A street address is required when ordering
To contact NHTSA, you may either call the Auto SafetyHotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153),or go to http://www.safercar.gov; or write to: Administra-tor, NHTSA, 400 Seventh Street, SW., Washington, D.C.20590. You can also obtain other information about motorvehicle safety from h...
Page 438 - Temperature Grades
Temperature Grades The temperature grades are A (the highest), B, and C,representing the tire’s resistance to the generation of heatand its ability to dissipate heat, when tested undercontrolled conditions on a specified indoor laboratorytest wheel. Sustained high temperature can cause thematerial o...
Page 439 - INDEX
Page 442 - Load N Go
Cargo Load Floor . . . . . . . . . . . . . . . . . . . . . . . . 162Cargo Slide Out System Load N Go . . . . . . . . . . . . . . . . . . . . . . . . . . 163 Cargo Tie-Downs . . . . . . . . . . . . . . . . . . . . . . . . 160Cargo (Vehicle Loading) . . . . . . . . . . . . . . . . . . . 334Cellular Ph...
Page 444 - Emergency, In Case of
Emergency, In Case of Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . 355Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 Emission Control System Maintenance . . . . . . 370,412Engine . . . . . ....
Page 451 - Power
Power Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Steering . . . . . . . . . . . . . . . . . . . . . . . . . . 282,283Sunroof . . . . . ....
Page 452 - Shoulder Belt Anchorage
Restraints, Occupant . . . . . . . . . . . . . . . . . . . . . . 37Roll Over Warning . . . . . . . . . . . . . . . . . . . . . . . . 4Roof Type Carrier . . . . . . . . . . . . . . . . . . . . . . . 166Rotation, Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 315 Safety Checks Inside Vehicl...
Page 456 - YES Essentials
Uniform Tire Quality Grades . . . . . . . . . . . . . . . . 435Universal Transmitter . . . . . . . . . . . . . . . . . . . . . 144Upholstery Care . . . . . . . . . . . . . . . . . . . . . . . . 395 Vanity Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Variance, Compass . . . . . . ....
Page 459 - NITR; First Edition; OWNER’S MANUAL
2009 NITR O NITR O Chrysler LLC81-326-0913 First Edition Printed in U.S.A. OWNER’S MANUAL 2009