Dodge 2006 DR Ram SRT-10 - Manual

NOTE: It is illegal to remove the VIN plate. VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehiclecould seriously affect its roadworthiness and safetyand may lead to an accident resulting in seriousinjury or death. 6 INTRODUCTION

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS 䡵 A Word About Your Keys . . . . . . . . . . . . . . . . . .10 ▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . .10 ▫ Sentry Key — If Equipped . . . . . . . . . . . . . . . .10 䡵 Ignition And Steering Lock — If Equipped . . . . . .13 ▫ Man...

A WORD ABOUT YOUR KEYS The double sided keys may be inserted into the lockswith either side up. The keys for your new vehicle areenclosed in a plastic bag with a bar code label affixed tothe front. The bar code can be used to order duplicatekeys from your dealer or a locksmith. If you receivedyour k...

IGNITION AND STEERING LOCK — IF EQUIPPED Manual Transmissions Depress and hold the release button located between theignition switch and the instrument panel. Turn the igni-tion key to LOCK and remove the key. DOOR KEY The same key used to start the vehicle is also used tounlock the doors. To unlock...

WARNING! When leaving the vehicle always remove the keyfrom the ignition lock, and lock your vehicle. Do notleave children unattended in the vehicle, or withaccess to an unlocked vehicle. Unsupervised use ofvehicle equipment may cause severe personal inju-ries and death. NOTE: Vehicles equipped with...

Automatic Door Locks If this feature is enabled, your door locks will lockautomatically when the vehicle’s speed exceeds 15 mph. This feature is enabled when your vehicle is shippedfrom the assembly plant and can be disabled by using thefollowing procedure: 1. Enter your vehicle and close all doors....

REMOTE KEYLESS ENTRY — IF EQUIPPED This system allows you to lock or unlock the doors fromdistances up to about 23 feet (7 meters) using a hand heldradio transmitter. The transmitter need not be pointed atthe vehicle to activate the system. To unlock the doors: Press and release the UNLOCK button on...

4. To reactivate this feature, repeat the above steps. Using the Panic Alarm To activate the Panic mode while the ignition is OFF pressand release the PANIC button on the transmitter once.When the Panic mode is activated, the interior lights willilluminate, the headlamps and parking lights will flas...

2. Closeness to a radio transmitter such as a radio stationtower, airport transmitter, and some mobile or CB radios. Transmitter Battery Service The recommended replacement battery is a 3V lithium2016 cell. This transmitter requires two batteries. NOTE: Do not touch the battery terminals that are on...

SECURITY ALARM SYSTEM — IF EQUIPPED This system monitors the vehicle doors and ignition forunauthorized operation. When the alarm is activated, thesystem provides both audible and visual signals. For thefirst 3 minutes the horn will sound and the headlightsand security telltale will flash repeatedly...

horn will sound three times when you unlock the doorsand the security lamp will flash for 30 seconds. Check thevehicle for tampering. The Security system will also disarm, if the vehicle isstarted with a programmed Sentry Key. If an unpro-grammed Sentry Key is used to start a vehicle, the enginewill...

The control on the left front door panel has up-downswitches that give you fingertip control of all powerwindows. There is a single opening and closing switch onthe front passenger door for passenger window control.The windows will operate only when the ignition switchis turned to the ON or ACC (Acc...

Window Lockout Switch (4 Door Models Only) The window lockout switch on the driver’s door allowsyou to disable the window control on the other doors. Todisable the window controls on the other doors, press thewindow lock button. To enable the window controls,press the window control button again. Po...

WARNING! In a collision, you and your passengers can suffermuch greater injuries if you are not properly buck-led up. You can strike the interior of your vehicle orother passengers, or you can be thrown out of thevehicle. Always be sure you and others in yourvehicle are buckled up properly. Buckle u...

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back andadjust the seat. 2. The seat belt latch plate is above the back of the frontseat, next to your arm in the rear seat. Grasp the latch plate and pull out the belt. Slide the latch plate up thewebbing as far a...

Standard Cab Front Center Three Point Belt 1. The front center seat belt on the Standard Cab may bedisconnected to open up utilization of the storage areasbehind the front seats. The black latch plate can bedetached from the black keyed seat belt buckle located onthe inboard side of the passenger se...

WARNING! • If the black latch and black buckle are not prop-erly connected when the seat belt is used by anoccupant, the seat belt will not be able to provideproper restraint and will increase the risk ofinjury in a collision. • When reattaching the black latch and blackbuckle, ensure the seat belt ...

WARNING! If the black latch and buckle are not connected whenthe seat belt is used by an occupant, the seat belt willnot restrain you properly. Adjustable Upper Shoulder Belt Anchorage In the front row outboard seats, the shoulder belt can beadjusted upward or downward to help position the beltaway ...

As a guide, if you are shorter than average, you willprefer a lower position, and if you are taller than average,you’ll prefer a higher position. When you release theanchorage, try to move it up or down to make sure thatit is locked in position. Automatic Locking Retractors (ALR) Mode – IfEquipped I...

3. Allow the belt to retract. As the belt retracts, you willhear a clicking sound. This indicates the safety belt isnow in the automatic locking mode. How To Disengage The Automatic Locking Mode Disconnect the combination lap/shoulder belt and allowit to retract completely to disengage the automatic...

NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt still must beworn snugly and positioned properly. The pretensioners are triggered by the airbag controlmodule. Like the airbags, the pretensioners are single useitems. After a collision that is sev...

3. Within 60 seconds of turning the ignition switch to theON position, unbuckle and then re-buckle the driver’sseat belt at least three times within 10 seconds, endingwith the seat belt buckled. NOTE: Watch for the Seat Belt Warning Light to turn on while unbuckling and off while re-buckling the sea...

Along with the seat belts, front airbags work with theinstrument panel knee bolsters to provide improvedprotection for the driver and front passenger. Windowbags also work with seat belts to improve occupantprotection. The seat belts are designed to protect you in many typesof collisions. The front ...

Air Bag System Components The airbag system consists of the following: • Occupant Restraint Controller • Side Remote Acceleration Sensors (If Equipped) • Airbag Warning Light • Driver Airbag • Passenger Airbag • Window Bags above Side Windows (If Equipped) • Steering Wheel and Column • Instrument Pa...

How the Airbag System Works • The Occupant Restraint Controller (ORC) determines if a frontal collision is severe enough to require theairbags to inflate. The front airbag inflators are de-signed to provide different rates of airbag inflationfrom direction provided by the ORC. If your vehicle isequi...

• If your vehicle is equipped with an Occupant Classi-fication System (OCS), the sun visor air bag warninglabel will have the phrase ⬙ even with advanced air bags ⬙ on it. The OCS will instruct the ORC to either suppress the deployment of the front passenger airbagor reduce the force of a deploying ...

airbag is turned off until the fault is cleared. If an objectis lodged under the seat and interferes with operation ofthe weight sensors, a fault will occur which turns on boththe PAD Indicator Light (If Equipped) and the AirbagWarning Light. Once the lodged object is removed, thefault will be autom...

WARNING! Whenever an airbag is turned off, even a lap/shoulder belted passenger may hit their head, neck,or chest on the dashboard (instrument panel) orwindshield in a crash. This may result in seriousinjury or death. To Shut Off the Passenger Airbag (Standard Cab Ve-hicles Only) Place the ignition ...

Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when youneed it. You could be injured if the airbag system is not there to protect you.Do not modify the components or wiring, including adding any kind ofbadges or stickers to the steerin...

• The light remains on or flickers after the 6 to 8 secondinterval. • The light flickers or comes on and remains on whiledriving. NOTE: If the speedometer, tachometer or any engine related gauges are not working, the airbag control mod-ule may also be disabled. The airbags may not be readyto inflate...

Child Restraint Everyone in your vehicle needs to be buckled up all thetime — babies and children, too. Every state in the UnitedStates and all Canadian provinces require that smallchildren ride in proper restraint systems. This is the law,and you can be prosecuted for ignoring it. Children 12 years...

• If the belt still can’t be tightened, or if pulling andpushing on the restraint loosens the belt, disconnectthe latch plate from the buckle, turn the bucklearound, and insert the latch plate into the buckleagain. If you still can’t make the child restraint secure,try a different seating position. ...

Identification dots are located above the standard cabfront seat lower anchorages as a guide for locating loweranchors. NOTE: For children riding in the front seat of a Stan- dard Cab model refer to the “Passenger Airbag On/OffSwitch” located in this section. Standard Cab Passenger Quad Cab Rear Out...

Installing the Child Restraint System WARNING! Do not install child restraint systems equipped withLATCH attachments in the center position of a QuadCab model rear seat. The LATCH anchorages in thisseat are designed for the two outboard seating posi-tions only. A child may be placed in the rear cent...

WARNING! Improper installation of a child restraint to theLATCH anchorages can lead to failure of an infant orchild restraint. The child could be badly injured orkilled. Follow the manufacturer’s directions exactlywhen installing an infant or child restraint. Child Restraint Tether Anchor Child rest...

2. Lift the cover (if so equipped), and attach the hook tothe square opening in the sheet metal. 3. Install the child restraint and remove the slack in thetether strap according to the manufacturer’s instructions. Multiple Child Restraint Installation Sequence -(Quad Cab Rear Seats) 1. Obtain tether...

Quad Cab Tether Strap Mounting 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Children Too Large for Booster Seats Children who are large enough to wear the shoulder beltcomfortably, and whose legs are long enough to bendover the front of the seat when their back is against theseat back should use the lap/shoulder belt in a rear seat. • Make sure that the child is upright in ...

• Check the engine oil level at every fuel fill. NOTE: A new engine will consume some oil during the first few thousand miles of operation. This should beconsidered as a normal part of the break-in and notinterpreted as a sign of difficulty. SAFETY TIPS Transporting Passengers This vehicle is design...

Exhaust Gas WARNING! Exhaust gases contain carbon monoxide, a poten-tially toxic gas that by itself is colorless and odorless.To avoid inhaling these gases, the following precau-tions should be observed: • Do not run the engine in a closed garage or in confinedareas any longer than needed to move yo...

Safety Checks You Should Make Inside TheVehicle Seat Belts Inspect the belt system periodically, checking for cuts,frays and loose parts. Damaged parts must be replacedimmediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after an accident ifthey have been damag...

UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS 䡵 Hands–Free Communication (UConnect™) —If Equipped . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 ▫ Operations . . . . . . . . . . . . . . . . . . . . . . . . . . .77 ▫ Phone Call Features . . . . . . . . . . . . . . . . . . . .84 ▫ UCo...

▫ Venting Sunroof - Express . . . . . . . . . . . . . . . 135 ▫ Sunshade Operation . . . . . . . . . . . . . . . . . . . 135 ▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . 136 ▫ Sunroof Maintenance . . . . . . . . . . . . . . . . . . . 136 ▫ Sunroof Fully Closed . . . . . . . . . . ....

access the system. The diagram below shows the mirrorwith the appropriate buttons. Individual button behavioris discussed in the ⬙ Operation ⬙ section. The UConnect™ system can be used with any Hands-Free Profile certified Bluetooth™ cellular phone. Seewww.chrysler.com/uconnect for supported phones....

Pair (Link) UConnect™ System to a Cellular Phone To begin using your UConnect™ system, you must pairyour compatible Bluetooth™ enabled cellular phone (re-fer to ⬙ Introduction ⬙ section to learn about the phone type). To complete the pairing process, you will need toreference your cellular phone own...

• For identification purposes, you will be prompted togive the UConnect™ system a name for your cellularphone. Each cellular phone that is paired should begiven a unique phone name. • You will then be asked to give your cellular phone apriority level between 1 and 7, 1 being the highestpriority. You...

After you are finished adding an entry into the phone-book, you will be given the opportunity to add morephone numbers to the current entry or to return to themain menu. The UConnect™ system will allow you to enter up to 32names in the phonebook with each name having up tofour associated phone numbe...

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Emergency ⬙ and the UConnect™ system will instruct the paired cellular phone to call the emergency num-ber. This feature is only supported in the USA. NOTE: The emergency number dialed is based on the Country where the vehicle is purchased (...

• The selected phone will be used for the next phonecall. If the selected phone is not available, the UCon-nect™ system will return to using the highest priorityphone present in or near (approximately with in 30feet) the vehicle. Delete UConnect™ Paired Cellular Phones • Press the ’Phone’ button to ...

• low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speakingin North American English, French, and Spanish ac-cents, the system may not always work for some. • When navigating through an automated system, suchas, vo...

• smooth road surface, • fully closed windows, and • dry weather condition. • Operation from driver seat. • Performance, such as, audio clarity, echo. and loud-ness to a large degree, rely on the phone and network,and not the UConnect™ system. • Echo at far end can sometime be reduced by loweringthe...

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main ...

WARNING! Adjusting a seat while the vehicle is moving isdangerous. The sudden movement of the seat couldcause you to lose control. The seat belt might not beproperly adjusted and you could be injured. Adjustany seat only while the vehicle is parked. WARNING! You can be seriously, even fatally injure...

Manual Passenger Seat The passenger seat is adjustable forward or backwardand is equipped with a back recliner. Manual Seatback Recline The recliner handle is on the outside of the seat cushion.Pull up on the handle, as shown, to release the seat backand adjust for comfort. Passenger Side Manual Sea...

WARNING! You can be seriously, even fatally, injured riding in aseat with the seatback reclined. Do not ride with theseatback reclined so that the shoulder belt is nolonger resting against your chest. If you ride in thisposition, the shoulder harness will no longer berestraining you. In a collision ...

Heated Seats — If Equipped The heated seat switches are located in the instrumentpanel under the climate controls. Each heated seat switch has two settings (HI and LOW).Press the switch once to obtain High heat level, thenpress the switch again to obtain Low heat level. Pressingthe switch a third ti...

TO OPEN AND CLOSE THE HOOD To open the hood, two latches must be released. First pullthe hood release lever located below the steering wheel atthe base of the instrument panel. Once the hood isreleased you must reach into the opening beneath thecenter of the grille and push up the latch to release t...

WARNING! If the hood is not fully latched, it could fly up whenthe vehicle is moving and block your forward vision.Be sure all hood latches are latched fully beforedriving. LIGHTS Headlight Switch Location 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Interior Lights Courtesy and dome lights are turned on when the frontdoors are opened, when the dimmer control (rotatingwheel on the right side of the switch) is rotated to theupward detent position, or if equipped, when the UN-LOCK button is pressed on the key fob.When a door is open and the interi...

Battery Saver To protect the life of your vehicle’s battery, Load Shed-ding is provided for both the interior and exterior lights. If the ignition is off and any door is left ajar for 10minutes or the dimmer control is rotated upwards for 10minutes, the interior lights will automatically turn off. I...

Your vehicle is equipped with plastic headlight lensesthat are lighter and less susceptible to stone breakagethan glass headlights. Plastic is not as scratch resistant as glass and thereforedifferent lens cleaning procedures must be followed. To minimize the possibility of scratching the lenses andr...

Lights-on Reminder If the headlights, parking lights, or cargo lights are lefton, after the ignition is turned off, a chime will soundwhen the driver’s door is opened. Fog Lights — If Equipped The foglights are turned ON by placing the head-light rotary control in the parking light or head-light pos...

MULTIFUNCTION CONTROL LEVER The multifunction control lever is located on the left sideof the steering column. Turn Signals Move the lever up or down to signal a right-hand orleft-hand turn. The arrow on either side of the instrument cluster flashesto indicate the direction of the turn, and proper o...

High Beam / Low Beam Select Switch Pull the multifunction control lever fully toward thesteering wheel to switch the headlights from HIGH orLOW beam. Windshield Wipers The wipers and washers are operated by a switch in themultifunction control lever. Turn the end of the handle toselect the desired w...

Intermittent Wiper System The intermittent feature of this system was designed foruse when weather conditions make a single wiping cycle,with a variable pause between cycles, desirable. Formaximum delay between cycles, rotate the control knobinto the upper end of the delay range. The delay interval ...

Windshield Washers To use the washer, push in on the washer knob on the endof the multifunction control lever and hold while spray isdesired. If the washer knob is depressed while in thedelay range, the wiper will operate for several secondsafter the washer knob is released. It will then resume thei...

WARNING! Tilting the steering column while the vehicle ismoving is dangerous. Without a stable steering col-umn, you could lose control of the vehicle and havean accident. Adjust the column only while the ve-hicle is stopped. Be sure it is locked before driving. DRIVER ADJUSTABLE PEDALS The power ad...

Adjustment 1. Position the driver seat so that you are at least 10inches (254 mm) away from the airbag located in thecenter of the steering wheel. 2. Fasten and adjust the seatbelts. 3. Move the adjustable pedal switch, located to the left ofthe steering column near the parking brake release, in the...

ELECTRONIC SPEED CONTROL When engaged, this device takes over accelerator opera-tion at speeds greater than 35 mph (56 km/h). Thecontrols are mounted on the steering wheel. To Activate Push the ON/OFF button to the ON position. In theinstrument cluster, the word “CRUISE” illuminates whenthe system i...

WARNING! Leaving the Speed Control ON when not in use isdangerous. You could accidentally set the system tocause it to go faster than you want. You could losecontrol and have an accident. Always leave thesystem OFF when you aren’t using it. To Resume Speed To resume a previously set speed, push and ...

for your specific engine), the speed control will automati-cally disengage. If this happens, you can push down onthe accelerator pedal to maintain the desired speed. Vehicles equipped with a 6–speed-manual transmissionshould be operated in 5th gear or lower under the aboveconditions. WARNING! Speed ...

Courtesy/Reading Lights In the middle of the console are two courtesy/readinglights. Both lights illuminate as courtesy lights when a door isopened, when the dimmer control is rotated to thecourtesy light position (fully upward position), or whenthe UNLOCK button is pressed on the Remote KeylessEntr...

US/M Button Use this button to change the display from U.S. to metricmeasurement units. RESET Button Use this button to reset the following displays to zero:Average Fuel EconomyTrip OdometerElapsed time UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 3

Global Reset If the RESET button is pressed twice within 2 secondswhile in any of the 3 resettable displays (AVG ECO,ODO, ET), the Global Reset will reset all 3 displays. Step Button Use this button to choose or cycle through the four tripconditions. Average Fuel Economy (AVG ECO) Shows the average ...

C/T Button Use this button to select a readout of the outside tem-perature and one of eight compass headings that indicatethe direction in which the vehicle is facing. WARNING! Even if the display still reads a few degrees above32°F ( 0°C), the road surface may be icy, particularlyin woods or on bri...

Manual Compass Calibration NOTE: To ensure proper compass calibration, make sure the compass variance is properly set before manu-ally calibrating the compass. If the compass appears erratic and the CAL symbol doesnot appear, you must manually put the compass into the“Calibration” mode. To Put Into ...

NOTE: The default for the compass variance is zone 8. To set the variance: Turn the ignition ON and set thedisplay to “Compass/Temperature.” Press and hold theRESET button approximately five seconds. The last vari-ance zone number will be displayed. Press the STEPbutton to select the new variance zo...

GARAGE DOOR OPENER The HomeLink 威 Universal Transceiver replaces up to three remote controls (hand held transmitters) that oper-ate devices such as garage door openers, motorizedgates, or home lighting. It triggers these devices at thepush of a button. The Universal Transceiver operates offyour vehi...

WARNING! A moving garage door can cause injury to people andpets in the path of the door. People or pets could beseriously or fatally injured. Only use this transceiverwith a garage door opener that has a “stop andreverse” feature as required by federal safety stan-dards. This includes most garage d...

WARNING! Vehicle exhaust contains carbon monoxide, a danger-ous gas. Do not run the vehicle’s exhaust whiletraining the transceiver. Exhaust gas can cause seri-ous injury or death. WARNING! Your motorized door or gate will open and closewhile you are training the Universal Transceiver. Donot train t...

This device complies with part 15 of FCC rules and withRSS-210 of Industry Canada. Operation is subject to thefollowing conditions: • This device may not cause harmful interference. • This device must accept any interference that may bereceived including interference that may cause undes-ired operat...

Closing Sunroof - Express Press the switch forward and release, and the sunroofwill close automatically from any position. The sunroofwill close fully and stop automatically. This is calledExpress Close. During Express Close operation, anymovement of the switch will stop the sunroof. Pinch Protect F...

CIGAR LIGHTER AND ASH RECEIVER Cigar Lighter and Ash Receiver (vehiclesequipped with a manual transmission) On vehicles equipped with a manual transmission, theash receiver is opened and closed by pushing on the front surface of the receiver and then allowing thereceiver to open. The cigar lighter i...

NOTE: As a child safety precaution, the lighter only operates with the ignition switch ON. It heats whenpushed in and pops out automatically when ready foruse. To preserve the heating element, do not hold the lighter in the heating position. CUPHOLDERS Front Instrument Panel Cupholders (40–20–40Seat...

Front Instrument Panel Cupholders (BucketSeats) — Automatic Transmission If your new Ram truck is equipped with bucket seatsthere are three cup holders located on the front of thecenter console. Front Cupholders — Manual Transmission The cupholders consist of two cupwells for passengerconvenience. R...

Center Storage Compartment (Bucket Seats)— IfEquipped Push the upper button on the front of the armrest to raisethe upper cover. Inside is a power outlet (if equipped), acut out for a cell phone charger cord, removable coinholder (if equipped), and a divider to configure the storage area into separa...

CAUTION! • Many accessories that can be plugged in drawpower from the vehicle’s battery, even when notin use (i.e. cellular phones, etc.). Eventually, ifplugged in long enough, the vehicle’s battery willdischarge sufficiently to degrade battery lifeand/or prevent engine starting. • Accessories that ...

WARNING! Do not operate the vehicle with loose items stored onthe load floor. While driving or in an accident youmay experience, abrupt stopping, rapid acceleration,or sharp turns. Loose objects stored on the load floormay move around with force and strike occupants,resulting in serious or fatal inj...

3. Reverse the procedure to store the load floor. Positioning the Load Floor for Storage Access Underthe Seat 1. Lift the 60/40 seat cushion(s) to the upward position. 2. Unsnap the securing snap. 3. Lift the load floor up to access storage under the loadfloor. Load Floor In Open Position Load Floor...

WARNING! Do not drive with the load floor in the up position.When stopping fast or in an accident, the load floorcould move to the down position causing seriousinjury. 4. Reverse the procedure to put the load floor back in thesecured down position before you operate the vehicle. Rear Seat Storage Lo...

PICKUP BOX The pickup box on your new Ram has many featuresdesigned for utility and convenience. NOTE: If you are installing a toolbox to the front of the pickup box, you must use Mopar 威 toolbox brackets available from your dealer. You can carry wide building materials (sheets of ply-wood, etc.) by...

WARNING! • Care should always be exercised when operating avehicle with unrestrained cargo. Vehicle speeds mayneed to be reduced. Severe turns or rough roads maycause shifting or bouncing of the cargo that mayresult in vehicle damage. If wide building materialsare to be frequently carried, the insta...

TONNEAU COVER REMOVAL — IF EQUIPPED NOTE: This procedure requires a minimum of two (2) people to complete. 1. Lower the tailgate. 2. Pull the handle, located at the center rear of theunderside of the cover, to release the latches and lift thecover to the up position. Lowering The Tailgate Location O...

4. Move the two, already in open position, latches at rearcorner of the cover into the closed position. 5. While supporting the cover, release both gas prop rodsusing the quick disconnects Placing The Rear Latches In Closed Position Quick Disconnect(s) 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

8. Lift the cover straight up and the carry cover towardsthe rear of the vehicle Reverse the procedure for installation. NOTE: Insert the locator pins on the front hinges into the front locator pin holes, on the top edge of the bed. Lifting Cover Up Carrying Cover Toward The Rear Of the Vehicle 156 ...

Set the top switch to the left or right for the left or rightmirror, and set it to the center off position to preventaccidentally moving a mirror when you are finishedadjusting the mirror. To adjust a mirror, select left or rightwith the top switch, and press one of the four arrows forthe direction ...

UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS 䡵 Instruments And Controls . . . . . . . . . . . . . . . . . 163 䡵 Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . 164 䡵 Instrument Cluster Description . . . . . . . . . . . . . 165 䡵 Electronic Digital Clock . . . . . . . . . . . . . . . ....

INSTRUMENTS AND CONTROLS UNDERSTANDING YOUR INSTRUMENT PANEL 163 4

INSTRUMENT CLUSTER 164 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER DESCRIPTION 1. Check Gages This light illuminates when the Voltmeter, EngineOil Pressure or Engine Coolant Temperature gages indicate a reading either too high or too low.Examine the gages carefully, and follow the instructionsabove for each indicated problem. NOTE: When the ignit...

NOTE: If the gauge pointer moves to either extreme of the gauge, the “Check Gages” indicator will illuminateand a single chime will sound. 10. TOW HAUL The TOW HAUL button is located at the end of the gearshift lever. This light will illuminate when the TOWHAUL button is pushed once. (See page 208 f...

12. Security The light will flash rapidly for approximately 16 secondswhen the vehicle theft alarm is arming. The light willflash at a slower rate after the alarm is set. The securitylight will also come on for about two seconds when theignition is first turned ON. 13. Transmission Range Indicator (...

25. Door Ajar The Door Ajar light will illuminate when any dooris opened. When the ignition is ON the Door Ajarlight will stay illuminated until the open door is closed. When the ignition is OFF the Door Ajar light willstay illuminated until the open door is closed or thebattery saver feature automa...

Clock Setting Procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side Tune /Audio control. 3. After the hours are adjusted, press the right side Tune/ Audio control to set the minutes. 4. Adjust the minutes using the right side Tune / Audiocon...

Satellite Navigation Radio with CD Player with MP3Capability (REC) - combines a Global-PositioningSystem-based navigation system with an integrated colorscreen to provide maps, turn identification, selectionmenus and instructions for selecting a variety of destina-tions and routes, AM/FM stereo radi...

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pressthe ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volu...

NOTE: In Hands Free Phone (if equipped) mode, the MUTE button mutes the microphone. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to search forthe next listenable station, in either AM, FM or Satellite (ifequipped) frequencies, pausing for 5 seconds at eachlistenable station bef...

TUNE Control (Radio Mode) Turn the right side rotary control clockwise to increase orcounter-clockwise to decrease the frequency. AM/FM Button (Radio Mode) Press the button to select AM or FM Modes. Setting the Tone, Balance, and Fade Press the rotary TUNE control and BASS will display.Turn the TUNE...

Press the SEEK button to move to the next randomlyselected track. Press and hold the FF button to fast forward through thetracks. Release the FF button to stop the fast forwardfeature. Press the RND button a second time to stop RandomPlay. Buttons 1 - 6 (CD MODE for CD Audio Play) Selects disc posit...

Multisession disc formats are supported by the radio.Multisession discs may contain combinations of normalCD audio tracks and computer files (including MP3 files).Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD ...

Playback of MP3 Files When a medium containing MP3 data is loaded, theradio checks all files on the medium. If the mediumcontains a lot of folders or files, the radio will take moretime to start playing the MP3 files. Loading times for playback of MP3 files may be affectedby the following: • Media -...

LOAD / EJECT - Eject Press the LOAD/ EJECT button and the push-button with the corresponding number wherethe CD was loaded and the disc will unloadand move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to remove the dis...

CD Player Pressing the top of the switch once will go to the nexttrack on the CD. Pressing the bottom of the switch oncewill go to the beginning of the current track or to thebeginning of the previous track if it is within one secondafter the current track begins to play. If you press the switch up ...

RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the operation of a cellularphone in your vehicle can cause erratic or noisy perfor-mance from your radio. This condition may be lessenedor eliminated by relocating the cellular phone antenna.This condition is not harmful to the radio. If ...

Air Conditioning and Heating Operation To turn on the Air Conditioning, set the fan control at anyspeed and press the snowflake button located on thecontrol panel. Conditioned air will be directed throughthe outlets selected by the mode control. A light in thesnowflake button shows that the air cond...

Recirculation Pushbutton Pushing the Recirculation button al-lows interior air to recirculate continu-ously in any position except defrostand defrost/floor mode for rapid cooldown of the interior. See “FastCooldown” later in this section. Mode Control The mode control allows you tochoose from severa...

Heat Outside air flows primarily through the floor out-lets located under the instrument panel. Mix Outside air flows in equal proportions through thefloor and defroster outlets. Defrost Outside air is primarily directed to the windshieldthrough the defroster outlets located at the base of the winds...

Dual Zone Temperature Control Use this control to regulate the temperature of the airinside the passenger compartment. This is accomplishedby having separate temperature control slides for boththe driver and front passenger. The blue area of the scaleindicates cooler temperatures while the red area ...

When using the air conditioner in extremely heavy trafficin hot weather especially when towing a trailer, addi-tional engine cooling may be required. If this situation isencountered, operate the transmission in a lower gear toincrease engine RPM, coolant flow and fan speed. Whenstopped in heavy traf...

Operating Tips Chart UNDERSTANDING YOUR INSTRUMENT PANEL 197 4

STARTING AND OPERATING CONTENTS 䡵 Ignition/Starter Switch . . . . . . . . . . . . . . . . . . . 202 ▫ Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 ▫ Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 ▫ On . . . . . . . . . . . . . . . . . . . . . . . . . . ...

IGNITION/STARTER SWITCH LOCK Engages the steering wheel lock (if equipped) when thesteering wheel is turned. OFF Unlocks the steering wheel (if equipped with lockingwheel). ON This is the normal running position. ACC Allows the electrical accessories to be used when theengine is not running. Manual ...

STARTING PROCEDURES The starter should not be operated for more than 15-second intervals. Waiting a few seconds between suchintervals will protect the starter from overheating. Manual Transmission Apply the parking brake, place the gearshift control leverin NEUTRAL and depress the clutch pedal to th...

instrument panel and release when the engine starts. Ifthe engine fails to start within 10 seconds, turn the key tothe OFF position, wait 5 seconds, then repeat the normalstarting procedure. If Engine Fails To Start If the engine fails to start after you have followed thenormal starting procedure, i...

After Starting The idle speed is automatically controlled and will de-crease as the engine warms up. CAUTION! Long periods of engine idling, especially at highengine speeds can cause excessive exhaust tempera-tures which can damage your vehicle. Do not leaveyour vehicle unattended with the engine ru...

“P” Park This gear position supplements the parking brake bylocking the transmission. The engine can be started inthis range. Never use Park while the vehicle is in motion.Apply the parking brake when leaving the vehicle in thisrange. Always apply parking brake first, then place theselector in Park ...

NOTE: Do not exceed maximum engine speed. “1” First Use this position for driving up very steep hills and forengine braking at low speeds (20 mph [32 km/h] or less)when going downhill. NOTE: Do not exceed a maximum engine speed of 5500 rpm. Overdrive Operation The four-speed overdrive automatic tran...

• the engine coolant has reached normal operating tem-perature; • vehicle speed is above approximately 30 mph (48km/h); • the “TOW/HAUL” switch has not been activated; • transmission has reached normal operating tempera-ture. The transmission will downshift from Overdrive to Driveif the accelerator ...

occurs, press the “TOW/HAUL” button. This will im-prove performance and reduce the potential for transmis-sion overheating or failure due to excessive shifting. The “TOW/HAUL” light will illuminate in the instru-ment cluster to indicate when the switch has beenactivated. Pressing the switch a second...

Manual Transmission — 6-Speed NOTE: The parking brake should be engaged before leaving the vehicle, especially on an incline. This model is equipped with a clutch interlocking igni-tion system. The clutch pedal must be fully depressed tostart the vehicle. Fully depress the clutch pedal before shifti...

You should use low gear when starting from a standingposition if under a heavy load. To shift into Reverse, come to a complete stop. Depressthe clutch and pause briefly to allow the gear train tostop. Move the shift lever from the Neutral positionstraight across and up into Reverse. Never drive with...

CAUTION! When descending a hill, be very careful to downshiftone gear at a time to prevent overspeeding theengine which can cause valve damage. LIMITED-SLIP DIFFERENTIAL The limited-slip differential provides additional tractionon snow, ice, mud, sand and gravel, particularly whenthere is a differen...

PARKING BRAKE The foot operated parking brake is positioned below thelower left corner of the instrument panel. To release theparking brake, pull the parking brake release handle. NOTE: The instrument cluster red brake warning light will come on and flash to indicate that the parking brakeis applied...

WARNING! • Always fully apply the parking brake when leavingyour vehicle, or it may roll and cause damage orinjury. Also be certain to leave a manual transmis-sion in Reverse or first gear. Failure to do so mayallow the vehicle to roll and cause damage or injury. • Leaving children in a vehicle unat...

Brake Noise During normal operation of the brake system certainnoises may be present from time to time. Occasional ⬙ groan ⬙ or ⬙ squeal ⬙ noises may occur during normal operation of the brake system which may not be indica-tive of a problem. These noises may be heard at any timethe brakes are appli...

• European Metric tire sizing is based on Europeandesign standards. Tires designed to this standard havethe tire size molded into the sidewall beginning withthe section width. The letter ⬙ P ⬙ is absent from this tire size designation. Example: 215/65R15 96H • LT(Light Truck)-Metric tire sizing is b...

Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = S...

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load correspondingto its load index under certain operating conditions.—The maximum speed correspon...

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tirehowever the date code may only be on one side. Tireswith white sidewalls will have the full TIN includingdate code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black side...

Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side“B” pillar. Tire and Loading Information Placard This placard tells you important information aboutthe:1) number of people that can...

3) the tire size designed for your vehicle4) the cold tire inflation pressures for the front, rearand spare tires. Loading The vehicle maximum load on the tire must not exceedthe load carrying capacity of the tire on your vehicle. Youwill not exceed the tire’s load carrying capacity if youadhere to ...

2. Economy— Improper inflation pressures can cause uneven wearpatterns to develop across the tire tread. These abnormalwear patterns will reduce tread life resulting in a need forearlier tire replacement. Underinflation also increases tirerolling resistance and results in higher fuel consumption. 3....

Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speedswithin posted speed limits. Where speed limits or condi-tions are such that the vehicle can be driven at highspeeds, maintaining correct tire inflation pressure is veryimportant. Increased tire pressure and redu...

Compact Spare Tire — If Equipped The compact spare is for temporary emergency use withradial tires. It is engineered to be used on your stylevehicle only. Since this tire has limited tread life, theoriginal tire should be repaired (or replaced) and rein-stalled at the first opportunity. WARNING! Tem...

WARNING! Fast spinning tires can be dangerous. Forces gener-ated by excessive wheel speeds may cause tire dam-age or failure. A tire could explode and injuresomeone. Do not spin your vehicle’s wheels fasterthan 35 mph (55 km/h) when you are stuck. Anddon’t let anyone near a spinning wheel, no matter...

Life of Tire The service life of a tire is dependent upon varyingfactors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and spare tire should be replaced after sixyears, regardless of the remaining tread. Failure tofollow this warning can result in sud...

WARNING! • Do not use a tire, wheel size or rating other thanthat specified for your vehicle. Some combina-tions of unapproved tires and wheels may changesuspension dimensions and performance charac-teristics, resulting in changes to steering, han-dling, and braking of your vehicle. This can causeun...

Improper alignment will not cause vehicle vibration.Vibration may be a result of tire and wheel out-of-balance. Proper balancing will reduce vibration andavoid tire cupping and spotty wear. SUPPLEMENTAL TIRE PRESSURE INFORMATION A light load vehicle condition is defined as two passen-gers {150 lbs (...

These cautions apply to all chain traction devices, includ-ing link and cable (radial) chains. Tire chain use is permitted only on the rear tires ofSRT–10 Models. NOTE: The use of class “S” chains is permitted on SRT– 10 Models with the use of 17 x 8 steel wheels (partnumber 52113265AC) available fr...

TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate atdifferent loads and perform different steering, driving,and braking functions. For these reasons, they wear atunequal rates, and develop irregular wear patterns.These effects can be reduced by timely rotation of ti...

Sulfur In Gasoline Your vehicle may have been designed to meet Californialow emission standards on clean burning, low sulfur,California gasoline. Gasoline sold outside of California isallowed to have higher sulfur levels that may affect theperformance of your vehicle’s catalytic converter. Thismay c...

some light smoke, your engine may be out of tune ormalfunctioning and may require immediate service.Contact your dealer for service assistance. • When pulling a heavy load or driving a fully loadedvehicle when the humidity is low and the temperatureis high, use a premium unleaded fuel to help preven...

the vehicle is raised. Have any abnormal conditionsrepaired promptly. Until repaired, drive with all sidewindows fully open. ADDING FUEL NOTE: The fuel tank filler tube is about 2 inches (50 mm) down from the opening. If fuel is poured from aportable container, the container should have a flexibleno...

CAUTION! Damage to the fuel system or emission controlsystem could result from using an improper fueltank filler tube cap (gas cap). A poorly fitting capcould let impurities into the fuel system. WARNING! • Never allow any lit smoking materials near thevehicles while removing the cap or filling the ...

CAUTION! Damage to the catalytic converter can result if yourvehicle is not kept in proper operating condition. Inthe event of engine malfunction, particularly involv-ing engine misfire or other apparent loss of perfor-mance, have your vehicle serviced promptly. Contin-ued operation of your vehicle ...

Gross Trailer Weight (GTW) The gross trailer weight (GTW) is the weight of the trailerplus the weight of all cargo, consumables and equipment(permanent or temporary) loaded in or on the trailer in its ⬙ loaded and ready for operation ⬙ condition. The recom- mended way to measure GTW is to put your f...

Trailer Hitch Classification The rear bumper is intended to tow trailers up to 2,000lbs (907 kg) without added equipment or alterations tothe standard equipment. Your vehicle may be factoryequipped for safe towing of trailers weighing over 2,000lbs (907 kg) with the optional Trailer Tow Prep Package...

Trailer Towing Weights (Maximum Trailer WeightRatings) NOTE: For additional trailer towing information (maxi- mum trailer weight ratings) refer to the following websiteaddresses: • http:// www.dodge.com/towing . • http:// www.dodge.ca (Canada). Trailer and Tongue Weight Always load a trailer with 60...

• The weight of any other type of cargo or equipmentput in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additionalfactory-installed options, or dealer-installed options,must be con...

• Total weight must be distributed between the towvehicle and the trailer such that the following fourratings are not exceeded: 1. GVWR 2. GTW 3. GAWR 4. Tongue weight rating for the trailer hitch utilized(This requirement may limit the ability to alwaysachieve the 10% to 15% range of tongue weight ...

Towing Requirements — Trailer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer.This could cause inadequate braking and possiblepersonal injury. − An electronically actuated trailer brake controller is required when towing a trailer wit...

WARNING! Do not connect trailer brakes to your vehicle’s hy-draulic brake lines. It can overload your brake sys-tem and cause it to fail. You might not have brakeswhen you need them and could have an accident. Towing any trailer will increase your stopping dis-tance. When towing you should allow for...

Towing Tips Before setting out on a trip, practice turning, stoppingand backing the trailer in an area away from heavytraffic. If using a manual transmission vehicle for trailer towing,all starts must be in FIRST gear to avoid excessive clutchslippage. Towing Tips — Automatic Transmission The “D” ra...

NOTE: Check the automatic transmission fluid level before towing. Towing Tips — Tow/Haul (If Equipped) To reduce potential for automatic transmission overheat-ing, turn the “TOW HAUL” feature ON when driving inhilly areas or shift the transmission to Drive position 2 onmore severe grades. Towing Tip...

Trailer Towing Mirrors — If Equipped These mirrors are designed with an adjustable mirrorhead to provide a greater vision range when towingextra-wide loads. To change position inboard or out-board, the mirror head should be rotated (flipped Out orIn). A small blindspot mirror is integrated onto the ...

SNOWPLOW Dodge SRT-10 Models NOTE: DO NOT use Dodge SRT- 10 Models for snowplow applications. WARNING! Snowplows, winches, and other aftermarket equip-ment should not be added to the front end or yourvehicle. The airbag crash sensors may be affected bythe change in the front end structure. The airba...

CAUTION! Using this vehicle for snowplow applications cancause damage to the vehicle. WARNING! Attaching a snowplow to this vehicle could ad-versely affect performance of the airbag system in anaccident. Do not expect that the airbag will performas described earlier in this manual TRACTION When driv...

EQUIPMENT IDENTIFICATION PLATE The equipment Identification Plate is located on the hoodinner surface. The following information about your vehicle is dis-played on this plate: Model, Wheelbase, Vehicle Identifi-cation Number, Truck Order Number, and code numberswith descriptions of all production a...

WHAT TO DO IN EMERGENCIES CONTENTS 䡵 Hazard Warning Lights . . . . . . . . . . . . . . . . . . 266 䡵 Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 267 䡵 Jack Location . . . . . . . . . . . . . . . . . . . . . . . . . . 268 ▫ Removal . . . . . . . . . . . . . . . . . . . . . . . . ....

HAZARD WARNING LIGHTS The Hazard Warning switch is mounted on the top of thesteering column as shown in the illustration. To engage the Hazard Warning lights, depress the buttonon the top of the steering column. When the HazardWarning switch is activated, all directional turn signalswill flash off a...

JACK LOCATION Removal The jack and jack tools are stored under the frontpassenger seat. Lift the tab and slide the plactic coverforward for access. Remove the jack and tools by removing the wing bolt andsliding the assembly from under the seat. Jack Cover Jack Wing Bolt 268 WHAT TO DO IN EMERGENCIES

Reinstalling The Scissors-Type Jack And Tools(SRT–10 Models) 1. Lower the jack all the way down by turning the jackturn-screw until the jack is snug. 2. Position the jack and tool bag (unrolled). Make surethe lug wrench is under the jack near the jack turn-screw. Turn Screw and Lug 270 WHAT TO DO IN...

CHANGING A FLAT TIRE Removing The Spare Tire Remove the spare tire before attempting to jack the truck.Attach the wheel wrench to the jack extension tube. Insertthe tube through the access hole between the lowertailgate and the top of the bumper and into the winchmechanism tube. Rotate the wheel wre...

• Turn on the Hazard Warning Flasher. • Block both the front and rear of the wheel diagonally oppo-site the jacking position. Forexample, if the right frontwheel is being changed, blockthe left rear wheel. • Passengers should not remain in the vehicle when thevehicle is being jacked. Instructions WA...

• When changing a rear wheel, assemble the jackdrive tube to the jack and connect the drive tube tothe extension tube. Place the jack under the axlebetween the spring and the shock absorber with thedrive tubes extending to the rear. • Connect the jack tube extension and wheel wrench. Before raising ...

6. Using the wheel wrench, finish tightening the nutsusing a crisscross pattern. Correct nut tightness is 90–110ft. lbs. (125–150 N·m). If in doubt about the correcttightness, have them checked with a torque wrench byyour dealer or at a service station. WARNING! A loose tire or jack thrown forward i...

DiscWheels Type Nut Stud Size Torque Ft. Lbs. TorqueNewtonMeters Cone 1/2-20 90-110 125-150 To Stow The Flat Or Spare Turn the wheel so that the valve stem is down. Slide thewheel retainer through the center of the wheel andposition it properly across the wheel opening. For convenience in checking t...

5. Connect the other cable, first to the negative terminalof the booster battery and then to the engine of thevehicle with the discharged battery. Make sure you havea good contact on the engine. WARNING! • Do not connect the cable to the negative post ofthe discharge battery. The resulting electrica...

MAINTAINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment— 8.3L . . . . . . . . . . . . . . . 288 䡵 Onboard Diagnostic System (OBD II) . . . . . . . . . 289 䡵 Emissions Inspection And MaintenancePrograms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289 䡵 Dealer Service . . . . . . . . . . . ...

ENGINE COMPARTMENT— 8.3L 288 MAINTAINING YOUR VEHICLE

For states which have an I/M (Inspection andMaintenance) requirement, this check verifies thefollowing: the MIL (Malfunction Indicator Lamp) is functioning and is not on when the engine is running,and that the OBD (On Board Diagnostic) system is readyfor testing. Normally, the OBD system will be rea...

b. The MIL light will remain fully illuminated until thefirst engine crank or the key is turned off. This meansthat your vehicle’s OBD system is ready and you can proceed to the I/M station. If your OBD system is not ready, you should see your dealer or repair facility. If your vehicle was recentlys...

WARNING! You can be badly injured working on or around amotor vehicle. Do only that service work for whichyou have the knowledge and the proper equipment.If you have any doubt about your ability to performa service job, take your vehicle to a competentmechanic. REPLACEMENT PARTS Use of genuine Mopar...

Checking the oil while the vehicle is on level ground willimprove the accuracy of the oil level readings. Maintainthe oil level between the ADD and SAFE markings on thedipstick. Adding one quart of oil when the reading is atthe ADD mark will result in a SAFE reading on theseengines. Change Engine Oi...

Engine Oil Identification (API) Symbol There is a symbol to aid you in selecting the properengine oil. This symbol means that the oil hasbeen certified by the AmericanPetroleum Institute (API). Weonly recommend synthetic APICertified engine oils, such as Mo-bil 1 威 , that meet the requirements of Ma...

Catalytic Converter The catalytic converter requires the use of unleaded fuelonly. Leaded gasoline will destroy the effectiveness of thecatalyst as an emission control device. Under normal operating conditions, the catalytic con-verter will not require maintenance. However, it is im-portant to keep ...

The ball joints originally supplied with the vehicle arepermanently lubricated at the factory and do not requireservice. However, if the seals on the ball joints aredamaged, the joints should be replaced. Serviceablereplacement ball joints are available.Front suspension ball joints should be replace...

Exhaust System The best protection against carbon monoxide entry intothe vehicle body is a properly maintained engine exhaustsystem. Whenever a change is noticed in the sound of the exhaustsystem, when exhaust fumes can be detected inside thevehicle, or when the underside or rear of the vehicle isda...

WARNING! Never add coolant to the radiator when the engine isoverheated. Do not loosen or remove pressure cap tocool an overheated engine! The coolant is underpressure and severe scalding could result. Drain, Flush And Refill At intervals shown on the Maintenance Schedules, thesystem should be drain...

NOTE: Failure to follow the antifreeze concentration and replacement recommendations, or failure to useantifreeze formulated to prevent corrosion of all coolingsystem metals, may result in radiator plugging, overheat-ing, or cooling system leaks such as in core hole plugs. WARNING! Never add coolant...

Propeller Shaft Universal Joints Cross Type (No fittings) — Relubrication of this type of universal joint is not required. The seals should beinspected for external leaks or damage. If external leaksor damage is evident, the universal joint should bereplaced. Rear Axle Fluid Level Refer to Fluids, L...

Manual Transmission Lubricant Selection Refer to the Fluids, Lubricants and Genuine Parts sectionfor correct fluid type. CAUTION! Using a transmission fluid other than the manufac-turer’s recommended fluid may cause deteriorationin transmission shift quality. Refer to the Fluids,Lubricants and Genui...

Procedure For Checking Fluid Level To properly check the automatic transmission fluid level,the following procedure must be used: 1. The vehicle must be on level ground. 2. The engine should be running at curb idle speed for aminimum of 60 seconds. 3. Fully apply parking brake. 4. Place the gear sel...

CAUTION! Using a transmission fluid other than the manufac-turers recommended fluid may cause deteriorationin transmission shift quality and/or torque convertershudder. Using a transmission fluid other than themanufacturers recommended fluid will result inmore frequent fluid and filter changes. Refe...

Front Wheel Bearings Front wheel bearings for all Dodge Ram Trucks aresealed-for-life. They do not require greasing or sealreplacement. In some instances, these bearings will“purge” excess grease and the bearing will look slightlywet. This is normal. Periodic inspection for excess play isrecommended...

• Avoid using abrasive compounds and power buffingthat may diminish the gloss or thin out the paintfinish. CAUTION! Do not use abrasive or strong cleaning materialssuch as steel wool or scouring powder, which willscratch metal and painted surfaces. Special Care • If you drive on salted or dusty road...

• If you carry special cargo such as chemicals, fertilizers,de-icer salt, etc., be sure that such materials are wellpackaged and sealed. • If a lot of driving is done on gravel roads, considermud or stone shields behind each wheel. • Use Mopar 威 touch up paint on scratches as soon as possible. Your ...

INTEGRATED POWER MODULE Your vehicle is equipped with a fuse and relay centerlocated in the engine compartment near the battery.Located on the underside of the cover is a label thatidentifies each component. Cavity Cartridge Fuse Mini Fuse Description 1 20 AmpYellow Power Outlet Console 2 20 AmpYell...

Cavity Cartridge Fuse Mini Fuse Description 39 10 AmpRed Sunroof/Seatbelt Ten-sioner 40 20 AmpYellow Cigar Lighter 41 25 AmpNatural Spare 42 30 AmpPink Diesel PCM (DieselOnly) 1. Disconnect the battery negative (-) cable before remov-ing the cover. 2. Use specified fuses only. 3. Always properly rei...

1. Open the hood 2. Remove the two (2) bolts from the front of the head-light housing. 3. Remove the plug from the inner fender well andremove the nut through the access hole. Front Headlight Housing Bolts Inner Fender Plug 326 MAINTAINING YOUR VEHICLE

4. Pull the housing out from the fender to allow room todisconnect the electrical connectors. NOTE: For easier removal, pull the headlight assembly straight forward, applying the greatest amount of force tothe outer edge of the headlight assembly. Rear Headlight Housing Nut Access Headlight Removal ...

5. Unlock and pull connector straight from the base ofthe headlight halogen bulb. 6. Twist connector on turn signal/park light bulb 1 ⁄ 4 turn and remove connector and bulb from housing. 7. Remove housing from vehicle with headlight halogenbulb in housing. 8. Twist the headlight halogen bulb 1 ⁄ 4 t...

7. While holding the taillight firmly in place, fasten thetop screw first. Center High-Mounted Stoplight With Cargo Light 1. Remove the two (2) screws holding the housing/lensto the body as shown. 2. Separate the connector holding the housing and wir-ing harness to the body. 3. Turn desired bulb soc...

4. Pull desired bulb straight from the socket. • Outside Bulbs: Cargo Lamps • Inside Bulb: Center High Mount Stop Lamp 5. Reverse procedure for installation of bulbs and hous-ing. Cab Top Clearance Lights — If Equipped 1. Remove the two screws from the top of the light. 332 MAINTAINING YOUR VEHICLE

5. Reverse procedure for installation of bulbs and hous-ing. Fog Lights 1. Reach under the vehicle, unlock and twist connectorcounterclockwise 1 ⁄ 4 turn and remove connector and bulb from housing. 2. Pull bulb straight from the connector. 3. Reverse procedure for installation of bulbs and hous-ing....

Chassis Component Fluids, Lubricants and Genuine Parts. Manual Transmission Fluid Mopar Synthetic Manual Transmission Lubricant 75W/85W (Castrol Syn-torq LT 75W/85W) Automatic Transmission Fluid Mopar 威 ATF+4, Automatic Transmission Fluid. Clutch Linkage Multipurpose Grease, NLGI Grade 2 E.P. Limite...

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance . . . . . . . . 342 䡵 Maintenance Schedules . . . . . . . . . . . . . . . . . . . 342 ▫ Schedule “B” . . . . . . . . . . . . . . . . . . . . . . . . 345 ▫ Schedule “A” . . . . . . . . . . . . . . . . . . . . . . . . 355 8 M A I N T...

Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) Change engine oil and engine oil filter at intervalshown or 3 months, whichever comes first. X X X X X Drain and refill automatic transmission fluid. Re-place filter and adjust bands.* X Rotate tires. X X ...

Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) Change engine oil and engine oil filter at intervalshown or 3 months, whichever comes first. X X X X X Drain and refill automatic transmission fluid. Re-place filter and adjust bands.* X Drain and refi...

Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Change engine oil and engine oil filter at intervalshown or 3 months, whichever comes first. X X X X X Drain and refill automatic transmission fluid. Re-place filter and adjust bands.* X Rotate tires....

Miles 63,000 66,000 69,000 72,000 75,000 (Kilometers) (105 000) (110 000) (115 000) (120 000) (125 000) Change engine oil and engine oil filter at intervalshown or 3 months, whichever comes first. X X X X X Drain and refill automatic transmission fluid. Re-place filter and adjust bands.* X Drain and...

Miles 93,000 96,000 99,000 102,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) Change engine oil and engine oil filter at interval shownor 3 months, whichever comes first. X X X X Rotate tires. X X Check spare tire for proper pressure and correct stowage. X Flush and replace engine coolant,...

Miles 105,000 108,000 111,000 114,000 117,000 120,000 (Kilometers) (175 000) (180 000) (185 000) (190 000) (195 000) (200 000) Replace ignition cables. X Inspect and replace, if necessary, the PCVvalve.** X** Inspect auto tension drive belt and replace ifrequired. X X Flush and replace engine coolan...

Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [6] [12] [18] [24] [30] Change engine oil and engine oil filter. X X X X X Rotate tires. X X X X X Check spare tire for proper pressure and correctstowage. X X Inspect brake lining...

IF YOU NEED CONSUMER ASSISTANCE CONTENTS 䡵 Suggestions For Obtaining Service For YourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362 ▫ Prepare For The Appointment . . . . . . . . . . . . 362 ▫ Prepare A List . . . . . . . . . . . . . . . . . . . . . . . . 362 ▫ Be Reasonable ...

Customer Assistance For The Hearing Or SpeechImpaired (TDD/TTY) To assist customers who have hearing difficulties, themanufacturer has installed special TDD (Telecommuni-cation Devices for the Deaf) equipment at its CustomerCenter. Any hearing or speech impaired customer whohas access to a TDD or a ...

WARRANTY INFORMATION (U.S. Vehicles Only) See the Warranty Information Booklet for the terms andprovisions of DaimlerChrysler’s warranties applicable tothis vehicle. MOPAR 姞 PARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer. They will help you keep yourvehicle o...

PUBLICATION ORDER FORMS To order the following manuals, you may use either thewebsite or the phone numbers listed below. Visa, Mas-tercard, American Express, and Discover orders are ac-cepted. If you prefer mailing your payment, please callfor an order form. NOTE: A street address is required when o...

Adding Fuel . . . . . . . . . . . . . . . . . . . . . . . . 243,267Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . 241Air Cleaner, Engine (Engine Air Cleaner Filter) . . . 297Air Conditioner Maintenance . . . . . . . . . . . . . . . 301Air Conditioning Refrigerant . . . . . . . . ....

Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 313Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 203,211 Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . 205,212 Transmitter, Garage Door O...