Page 2 - any power mower must be operated properly to be safe.; IMPORTANT: READ CAREFULLY; See your dealer for warranty service, parts and repairs.
The Dixon ® ZTR ® Mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower: read the operator's manual carefully, and become completely familiar with the controls. The informatio...
Page 3 - INDEX
Page 3 INDEX SAFETY ............................................................ Pages 4 - 9WARRANTY POLICY ...................................... Page 10SPECIFICATIONS ........................................... Page 11SEAT ADJUSTMENT ...................................... Page 12CONTROLS ............
Page 4 - RIDING LAWNMOWERS, IF IMPROPERLY OPERATED,; The most common causes of injury to the operator or bystander...; SAFETY
Page 4 RIDING LAWNMOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SERIOUS INJURY OR DEATH The most common causes of injury to the operator or bystander... ...read and understand this manual to prevent injuries. SAFETY BLADE CONTACT RUN-OVER BACK-OVER TIP-OVER
Page 5 - SAFETY SYM BOLS; Caution; Safety Alert Symbol; Follow recommended safety precautions and safe; Danger
Page 5 SAFETY SYM BOLS Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. SAFETY Safety Alert Symbol When you see this symbol, BE ALERT to the potential for injury. Follow recommend...
Page 6 - serious injury or death.; WARNING
Page 6 SAFETY This cutting mower is capable of amputating hands & feet, and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. WARNING : The engine exhaust from this product contains chemicals known to the State of California to cause ...
Page 7 - which can result in severe injury or death.
Page 7 SLOPE OPERATION: Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it! SAFETY DO Mow across the slope with your Dixo...
Page 8 - Tragic accidents can occur if the operator is not alert to the; • Be alert and turn mower off if a child enters the area.
Page 8 Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen. Be alert to avoid accidents. • Keep children out of the mowing area and under the watc...
Page 11 - SPECIFICATIONS
Page 11 SPECIFICATIONS Models ZTR 4423 CHASSIS: Twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: All body parts are made of high density polyethylene. Dent and corrosion resistant. Front body contains access panel for battery service. MOWER DECK: 13 GA stamped steel co...
Page 12 - SEAT ADJUSTMENT
Page 12 1. Place parking brake in ON position. (Pull brake lever up) 2. Raise and push seat assembly forward. 3. Loosen five nuts, P/N 3205, and slide seat forward or backward to desired position.Retighten nuts, P/N 3205. DO NOT operate mower without seat adjustments properly tightened. 4 Raise and ...
Page 13 - CONTROLS; TRANSMISSION DRIVE SYSTEM; TO SET PARKING BRAKE:
Page 13 CONTROLS PARKING BRAKE: The parking brake is designed to hold the mower from moving andis not intended for use in stopping the mower while it is in motion. TRANSMISSION DRIVE SYSTEM : Allows the mower to turn on its own axis "Zero Turning Radius" Each lever controls one side of the m...
Page 16 - OPERATION INSTRUCTIONS; TOWING
Page 16 OPERATION INSTRUCTIONS Safe and successful operation will depend upon the operator having the correct knowledge of all controls used on the mower and making good judgements about the terrain to be mowed. NEVER allow anyone to operate the mower without complete knowledge of all controls and t...
Page 17 - If Any Safety Check FAILS:; PARKING BRAKE SWITCH TEST:; BLADE DRIVE SWITCH TEST:; Engine should not turn over or attempt to start.
Page 17 OPERATION INSTRUCTIONS If Any Safety Check FAILS: Do Not Operate The Mower until the system has been checked and repaired by an Authorized Dixon ZTR Dealer PARKING BRAKE SWITCH TEST: a)Place Parking Brake in OFF positionb)Turn ignition switch to START Engine should not turn over or attempt t...
Page 18 - STARTING INSTRUCTIONS:; Release parking brake.
Page 18 OPERATION INSTRUCTIONS STARTING INSTRUCTIONS: 1. Parking brake must be on, and blade drivedisengaged. 2. Move throttle control to "Choke" position ifengine is cold, full throttle if warm. 3. Insert ignition key and turn to "Start"position. When engine starts, release ignition...
Page 19 - MOWING WITH A MULCHING ATTACHMENT:
Page 19 OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT: Mulching or recycling the grass clippings requires a totally different mowing approach than would benormal when side discharging or bagging the grass. There may be instances or conditions where it is notpossible to hide all of the rec...
Page 20 - MOWING WITH A GRASS CATCHER ATTACHMENT:; CAUTION
Page 20 OPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT: In order to achieve optimum performance when mowing with a grass catching attachment, please readand follow the tips listed below. 1. Some applications may require installation of an optional weight box on the front of the mower ...
Page 21 - SIDE DISCHARGE OF THE CLIPPINGS:; GRASS HEIGHT SUGGESTIONS:
Page 21 OPERATION INSTRUCTIONS SIDE DISCHARGE OF THE CLIPPINGS: In order to achieve optimum performance when side discharging the grass clippings, please read andfollow the tips listed below. Additional information can be found in the troubleshooting guide. 1. Set engine speed control to the wide op...
Page 22 - CARE AND MAINTENANCE; MAINTENANCE SCHEDULE:; Before performing any maintenance,
Page 22 ENGINE: For engine operating and maintenance information, refer to the engine operating andmaintenance instructions furnished by the engine manufacturer, supplied with eachmower. BATTERY: Check the fluid in the battery at frequent intervals. Keep fluid level above the plates in each cell, us...
Page 23 - CUTTER BLADE MAINTENANCE; Observe proper blade position prior to removal.; BE SURE BLADE IS CENTERED ON PILOT BEFORE
Page 23 CUTTER BLADE MAINTENANCE : NOTE: Observe proper blade position prior to removal. 1. Safely raise front of mower. 2. Hold or block blade from turning. 3. Loosen blade nut and remove blade. 4. When replacing blade, tighten blade nut securely. Refer to diagram. CAUTION CARE AND MAINTENANCE Wear...
Page 24 - BELT TENSION
Page 24 CARE AND MAINTENANCE BELT TENSION TRANSAXLE DRIVE BELT: P/N 7650 No adjustment required. ENGINE TO MOWER DECK BELT: P/N 7725 No adjustment required. Correct belt tension is maintained through a fixed engine location and aspring loaded idler system. A pulsing movement of the belt idler will b...
Page 25 - MOWER DECK LEVELING PROCEDURE:
Page 25 CARE AND MAINTENANCE MOWER DECK LEVELING PROCEDURE: 1. Place mower on a smooth, level surface and check tire pressures to insure correct stance. Tires should be inflated as follows: Front: 16 - 21 lbsRear: 8 - 14 lbs 2. Turn each outer blade tip to align with the deck in a side to side manne...
Page 27 - HOT oil may cause burns. Allow engine to cool before draining oil.; CHANGING THE ENGINE OIL:; PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
Page 27 CARE AND MAINTENANCE CAUTION HOT oil may cause burns. Allow engine to cool before draining oil. CHANGING THE ENGINE OIL: •Replace filter each time the oil is changed. •These filters can be obtained from your authorized Briggs & Stratton engine dealer (P/N 492 932). •The use of any other ...
Page 29 - DRIVE SYSTEM ADJUSTMENTS:; REAR CHAIN ADJUSTMENT:
Page 29 DRIVE SYSTEM ADJUSTMENTS: Due to both the complex nature of the transmission and the number of special toolsrequired for service, adjustments should be entrusted to your dealer. There are a number of simple owner service items which greatly influence the performanceof the drive system. 1. Fr...
Page 30 - PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL
Page 30 CARE AND MAINTENANCE WHEELS AND TIRES: Correct tire pressure is important for correct operation of mower. Front Tires 11 X 4.00 X 5 16-21 lbs. PSI Rear Tires 18 X 9.50 X 8 8-14 lbs. PSI NOTE: Check lug nuts periodically for tightness. ELECTRICAL SYSTEMS: Keep all connections clean and tight....
Page 31 - STANDARD SERVICE PARTS LIST; Engine To Mower Deck:; Protect; your engine investment, use only original equipment filters.
Page 31 STANDARD SERVICE PARTS LIST BLADES: Lo-Lift: P/N 6236 Standard Hi-Lift: P/N 8688 BELTS: Engine To Mower Deck: P/N 7725 Serpentine Belt: P/N 6109 Engine To Transmission: P/N 2497 BRIGGS & STRATTON FILTER PART NUMBERS: Please refer to Briggs & Stratton Engine Operators Manual for corre...
Page 32 - TROUBLESHOOTING
Page 32 SITUATION CAUSES REMEDY Poor cut quality Ground speed too fast Reduce mowing speed Poor cut quality Incorrect engine to Install correct belt P/N 7725 mower deck belt Poor cut quality Engine RPM too low Increase engine RPM to maximum Poor cut quality Dull or bent blade Sharpen or replace as r...
