Page 3 - ii
ii © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIMOR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPERVENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA.CALIFORNIA STATE LAWS AND APPLICABL...
Page 7 - your warranty
4 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d your warranty Your warranty registration must be completely filled out andreturned within 10 days of purchase. Your product warranty will not be validated if your warranty registration is not returned.Make sure you...
Page 8 - Lock Button
5 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d 2 2--w wa ayy rre em mo otte e d diia ag grra am m sstta an nd da arrd d rre em mo otte e c co on nffiig gu urra attiio on n 1. Unlock/Lock Indicator (Orange) 2. Receive/Transmit Indicator (Green) 3. Remote Start/A...
Page 10 - Low Battery Notification
7 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d ssyysstte em m m ma aiin ntte en na an nc ce e This system needs no specific maintenance beyond remote control battery replacement. The remote is powered by a 1.5V AAA battery. Low Battery Notification If the batte...
Page 11 - standard configuration; Button
8 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d 2 2--w wa ayy rre em mo otte e ffu un nc cttiio on nss The receiver uses a computer-based Learn Routine to learn the 2- way remote buttons. This makes it possible to assign any 2-way remote button to any receiver f...
Page 13 - and Buttons; system signal paging features; Command Page
10 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d and Buttons An optional auxiliary convenience or expansion function that you have added to your system can be activated by pressing these buttons simultaneously. The auxiliary output controls _____________________...
Page 14 - Alarm Page
11 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d Alarm Page If the alarm system is triggered while armed, an Alarm Page will be sent to the 2-way remote control. After receipt of an Alarm Page at the 2-way remote, the LED icons will flash and the 2- way remote w...
Page 15 - Out of Range Notification; To enter programming mode
12 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d Out of Range Notification If a command is issued from the remote, but the remote is beyond the range of the vehicle to receive the command, the remote responds with 2 sets of 3 quick beeps and the Green LED will f...
Page 16 - Page notification; warning! safety first
13 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d Page notification The remote control can be programmed to notify the user of a page (audibly beeping if the vehicle’s status changes, e.g. door unlocked, engine started, vehicle violation, etc.). Press to select p...
Page 18 - active arming
15 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d M MU USST T IIM MM ME ED DIIA AT TE EL LY Y C CE EA ASSE E T TH HE E U USSE E O OF F T TH HE E U UN NIIT T A AN ND D SSE EE EK K T TH HE E A ASSSSIISST TA AN NC CE E O OF F A AN N A AU UT TH HO O-- R RIIZ ZE ED D ...
Page 19 - passive arming; When armed your vehicle is protected as follows:
16 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d passive arming The system can be programmed to arm itself automatically (called passive arming). If the system is programmed for passive arming, it will automatically arm 30 seconds after the ignition is turned of...
Page 20 - multi-level security arming; Table of Zones
17 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d ➤ If a door is opened, the system will immediately startchirping the siren and flashing the parking lights. Threeseconds later, the siren output changes to a continuous blast.This progressive response gives you ti...
Page 21 - arming while driving; Multi-Level Security Arming only applies to a sin-
18 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d ➤ Press a fourth time within five seconds: The siren chirps four times followed by a long chirp. Zones 2 and 4 are now bypassed. ➤ Press a fifth time within five seconds: The siren chirps five times followed by a ...
Page 22 - disarming
19 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d The remote will respond with the normal arming response plus a diagnostic notification because the ignition is On. When disarmed the remote will respond with the normal disarming response. disarming To disarm the ...
Page 23 - high security disarm; The first press of the remote button, while the
20 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d high security disarm This system includes High Security Disarm feature. If the system is triggered this feature allows the user to silence the siren and reset the system to the armed state without having to visual...
Page 24 - silent mode; The Valet
21 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d and know where the Valet button is located. Be sure to check with your installer at the time of installation for both the location and the preset response (1-5 presses) of the Valet button. To disarm the security ...
Page 25 - panic mode; The Warn Away
22 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d The remote responds with the normal arm/disarm notifications in silent mode. (If the remote has beeps programmed On, the remote will beep.) panic mode If you are threatened in or near your vehicle, you can attract...
Page 26 - To enter or exit Valet Mode:; remote start
23 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d To enter or exit Valet Mode: 1. Turn the ignition on. 2. Turn the ignition off. 3. Press and release the Valet button once within 10 seconds. The in-vehicle status LED will light solidly if you are entering Valet ...
Page 27 - To remote start the vehicle:
24 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d fan blower must be set to the desired level prior to remote starting the vehicle. To remote start the vehicle: 1. Press on the 2-way remote twice within 3 seconds. 2. The parking lights will flash to confirm that ...
Page 28 - When you are ready to drive the vehicle:
25 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the ON (not the START) position. 2. Press the brake pedal. While the vehicle is running during remote start operation, the system ...
Page 29 - Remote; This feature will not work if the brake pedal is
26 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d valet take-over The Valet Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle fo...
Page 30 - timer mode
27 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d T Too aaccttiivvaattee ssh hoorrtt--rru un n//ttu urrb boo:: 1. Park the vehicle and set parking 2. Remove your foot from the brake pedal and leave the engine running. 3. Press and release the and buttons at the s...
Page 31 - rear defogger; If the remote start is on the parking lights will turn; important
28 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d 4. The system will start the car and will run for the specified dura- tion, unless shut down by the remote start button . 5. The system will start every 3 hours until canceled by the brake, hood, or neutral safety...
Page 33 - starter anti-grind circuitry; Anti-grind circuitry only works when the remote
30 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d Channel 6 auxiliary output: When connected, pressing and will immediately activate this output to control an additional convenience option. The remote will respond with a page notification consisting of an output ...
Page 34 - disabling the remote start system; The system uses a wire connected to the vehicle to
31 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d disabling the remote start system This feature allows your system's remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally. This feature is useful if the vehicle...
Page 35 - nuisance prevention circuitry; Example
32 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d pedal will shut down the motor at any time during remote start operation, as well as preventing the remote start from activating while it is being pressed. nuisance prevention circuitry Your system has Directed’s ...
Page 36 - diia; arming diagnostics; Arming and disarming the system does not reset
33 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d d diia ag gn no ossttiic css The microprocessor at the heart of your system is constantly monitoring all of the switches and sensors connected to it. It is designed to detect any faulty switches and sensors and pr...
Page 37 - disarming diagnostics
34 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d delay and you arm your security system before the interior light turns off, you may hear a second Bypass Notification chirp. Once the light turns off, however, the security system resumes normal monitoring. disarm...
Page 38 - table of zones; A zone is represented by the number of in-vehicle status LED; Action
35 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d table of zones A zone is represented by the number of in-vehicle status LED flashes used by the system to identify a particular type of input. Standard input assignments are listed in the following table, along wi...
Page 39 - interpreting zone diagnostics
36 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d interpreting zone diagnostics Warn Away responses are not reported by arming or disarming diagnostics. If you receive a Bypass notification when arming or a Tamper Alert notification when disarming, look at the LE...
Page 40 - Owner Recognition cannot be programmed with-
37 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d fall out of sync with the control unit and fail to operate the system. To re-sync the remote simply press several times within range of the vehicle. The alarm will automatically re-sync and respond to the 2-way re...
Page 43 - When the system passively arms after one hour, the
40 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d ➤ Panic mode een naab blleed d/disabled when the ignition is turned on. (Some states have laws against sirens sounding in moving cars.) ➤ Forced passive arming oon n or off. If your security system is programmed f...
Page 44 - This feature will only function if the FailSafe
41 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d (one-half its normal armed rate) to indicate the AED arming cycle. Thirty seconds later, the starter will be disabled. To start the car, it will be necessary to disarm the system with the 2-way remote. It is also ...
Page 45 - Field Disturbance Sensor:
42 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d sse ec cu urriittyy & & c co on nvve en niie en nc ce e e exxp pa an nssiio on nss Listed below are some of the many expansion options available. Please consult your dealer for a complete explanation of al...
Page 46 - Power Window Control:
43 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d leases, sometimes an optional relay is required. If the factory release is not power-activated, Directed ® 's 522T trunk release solenoid can often be added. Power Window Control: Automatic power window control is...
Page 47 - Trigger or Triggered Sequence:
44 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d ready circuitry for the starter interrupt, however installation may require additional labor. Input: A physical connection to the system. An input can be provided by a sensor, pinswitch or by existing systems in t...
Page 48 - A zone is a separate input that the alarm can recognize as
45 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d Zone: A zone is a separate input that the alarm can recognize as unique. Each input to the system is connected to a particular zone. Often two or more inputs may share the same zone.
Page 52 - The company behind this system is Directed Electronics
The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers withthe finest vehicle security and car stereo products and accessories available. The recipient ofnearly 100 patents and Innovations Awards in the field of adva...
