Directed Electronics 3901V - Manual

3 © 2007 Directed Electronics - all rights reserved Using your system Arming your system You can activate, or arm, the system by locking the doors with your fac- tory keyless entry transmitter. When the system arms, you will hear a short siren sound and see the parking lights flash once. While the s...

4 © 2007 Directed Electronics-all rights reserved Armed protection When armed, your vehicle is protected as follows: z Light impacts to your vehicle will trigger the Warn Away sig-nal. The system will pulse the horn and flash the parkinglights for a few seconds. z Heavy impacts will trigger the syst...

5 © 2007 Directed Electronics - all rights reserved Multi-level security arming (If programmed ON ) Multi-Level Security Arming allows the user to select sensors to be active or bypassed when the system is armed. Multi-Level Security Arming can only be accessed if the function is set ON (option 3-2)...

6 © 2007 Directed Electronics-all rights reserved Disarming To disarm the system, unlock the doors using your factory keyless trans- mitter. The siren will sound twice, and the parking lights will flash twice. If the siren sounds either four or five times when disarming, refer to the Diagnostics sec...

7 © 2007 Directed Electronics - all rights reserved Valet ® mode You can prevent your system from arming, by using Valet ® Mode. This is very useful when washing the vehicle or having it serviced. In Valet ® Mode, the system will not arm, even with the transmitter, but all con- venience functions (d...

8 © 2007 Directed Electronics-all rights reserved The siren will sound and the parking lights will flash for 30 seconds. To stop Panic Mode at any time, press the unlock button on your factory transmitter. Nuisance Prevention Circuitry ® Your system has Nuisance Prevention Circuitry ® (NPC ® ). This...

10 © 2007 Directed Electronics-all rights reserved Diagnostics The microprocessor at the heart of your system is constantly monitor- ing all of the switches and sensors connected to it. It detects any faulty switches and sensors and prevents them from disabling the entire sys- tem. The microprocesso...

11 © 2007 Directed Electronics - all rights reserved Table of zones The zone number is the number of LED flashes used by the system to identify that input. The standard input assignments are listed below. ZONE (Number LED Flashes) DESCRIPTION 1 Trunk /hood opening 2 Heavy impact - detected by the sh...

12 © 2007 Directed Electronics-all rights reserved Glossary of terms Control Module: The “brain” of your system. Usually hidden under- neath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the alarm’s functions. Failsafe ® Starter Kill (if e...

13 © 2007 Directed Electronics - all rights reserved Notes

15 © 2007 Directed Electronics - all rights reserved QUICK REFERENCE GUIDE: To arm the system ■ You can arm the system by locking the doors with your factory keylessentry transmitter. When the system arms, your will hear a short chirp,and see the parking lights flash once. To disarm the system ■ To ...

18 © 2007 Directed Electronics-all rights reserved The company behind this system is Directed Electronics, Inc. Since its inception, Directed Electronics has had one purpose, to provide consumers withthe finest vehicle security and car stereo products and accessories available. The recipient ofnearl...