Page 2 - IIDENT
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 2 Index IIDENT PREFACE ................................................................................................................ 3 1.0 GENERAL DESCRIPTION ........................................................................................ 4 1....
Page 3 - VoiceGATE; PREFACE; the equipment and for the user’s safety.; ENVIROMENTAL CONDITIONS; ENVIROMENTAL TEMPERATURE; CLEANING THE TERMINAL; Caution against vibrations and dropping.; DECLARATION
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 3 PREFACE All rights reserved; no part of this publication may be reproduced, stored in a retrieval system, or trasmitted in any form or by any means, electronic, otherwise, without the prior written permission of Digicom S.p.A. The contents of this bookl...
Page 4 - GENERAL DESCRIPTION; Technical Features
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 4 1.0 GENERAL DESCRIPTION Digicom VoiceGATE is the ideal solution for the new Telecom Operators who want to take at home or office the new POTs with integration of Voice (Voice over IP) and Internet. VoiceGATE has 3 Ethernet ports (10/100) for the connect...
Page 5 - LED Description; Lan x; Connectors Description; ISDN
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 5 1.1 LED Description The VoiceGATE status can be checked through seven led indicators. Lan x Indicates the LAN ports status Off: no device connected On: device connected Line x Indicates the status of the two telephone lines Off: device not registered at...
Page 6 - Configuration; In the paragraph “VoiceGATE working test”; Computer configuration; Wan
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 6 2.0 Configuration VoiceGATE can be configured using a Web browser. (Explore, Netascape, etc). This chapter describes the test to carry out on the computer to enter the configuration and the procedure to save the mofications in the configuration. In the ...
Page 7 - Access to configuration; admin; NB: User name and password must be written with lower case.; Submit
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 7 2.2 Access to configuration 1. Run the browser and connect to http://192.168.2.1. When the connection is established, the following window will appear: Insert in the User Name field: admin Insert in the Password field: voicegate NB: User name and passwo...
Page 8 - Menù Description
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 8 Note: in case of problems while displaying the configuration, be sure that no proxy Server is active. In Microsoft Internet Explorer the Proxy setup is in: Tools, Internet Options, Connections LAN, Settings. Menù Description 1. General Configuration It ...
Page 9 - Save the configuration
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 9 2.3 Save the configuration To confirm the new settings you must press the Submit button at the end of any WEB page. To activate the modifications it is necessary, before you exit the configuration, to enter the Save settings menu and press the Submit bu...
Page 10 - VoiceGATE Working Test
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 10 2.4 VoiceGATE Working Test With simple operations you can test at once the working of VoiceGATE. We suggest to follow the procedures described in this chapter so to avoid working problems of VoiceGATE due to wrong configurations. The factory settings o...
Page 11 - Configuration Menù description; General Information; are displayed in this window.
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 11 2.5 Configuration Menù description General Information The information concerning the Hw and SW version and the elapsed time from the power on are displayed in this window.
Page 12 - Telephony Configuration; Automatic
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 12 Telephony Configuration The voice information are displayed in this window, in particular: Call Setting: defines the Voice working mode. It can be set to work with the Gatekeeper or with the internal address book. Codec Selected: it allows to define th...
Page 14 - Supplementary Services; CFU
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 14 Supplementary Services The information concerning the reading and the voice supplementary service setup, according the H.450 standard, are displayed in this window. You will find here a brief description of the various supplementary services. For almos...
Page 15 - H450.6 service allows the management of the call waiting option.
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 15 H.450.4 Call Hold H.450.4 service allows to put on hold a call and to call another number. Once the two calls have been activated, you can: • Press R + 1 -> To close the active call and recover the on hold call. • Press R + 2 -> To switch from a ...
Page 16 - Public Network Configuration; Use DHCP to obtain configuration
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 16 Public Network Configuration The information concerning the reading and the Wan (Uplink) parameters setup are displayed in this window. Use DHCP to obtain configuration : Enables/Disables the device to DHCP configuration IP Address: Device IP address -...
Page 17 - Private Network Configuration; do not insert an IP; PublicNetwork; cannot use addresses; IP Address Pool Mask:
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 17 Private Network Configuration The information concerning the reading and the LAN part parameters are displayed in this window: <----- Attention: do not insert an IP address of the same network used in the WAN configuration “ PublicNetwork Configurat...
Page 18 - Mac Addresses; Mac address assigned to the WAN; SNMP Agent; Device SNMP agent version; SNMP Security Server:; Server IP address enabled for SNMP queries
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 18 Mac Addresses The Mac addresses of the device (Wan and LAN side) are displayed in this window. Public Network Mac: Mac address assigned to the WAN Private Network Mac: Mac Address assigned to the LAN SNMP Agent The information concerning the reading an...
Page 19 - RIP; OnlyRX
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 19 RIP The information concerning the reading and the parameters setup of the RIP protocol are displayed in this window. RIP: Enables/Disables the RIP Silent Mode: OnlyRX – It manages the routing table in reception only RX+TX – It manages the routing tabl...
Page 20 - Route Table; The informations concerning the password setup.
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 20 Route Table The informations concerning the routing table are displayed in this window. Security Configuration The informations concerning the password setup.
Page 21 - Save Setting; VoiceGATE resets and load the current configuration.
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 21 Save Setting In this page it is possible to save the modified configuration via browser, clicking on the Submit button. VoiceGATE will restart to load the new configuration. After about 45 seconds it will be ready to be used. Reset In this page it is p...
Page 22 - Address Book Management; Add
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 22 3.0 VoiceGATE.exe The VoiceGATE utility allows to : - Create the “AddressBook” - Load the AddressBook in the VoiceGATEs - Upgrade the VoiceGATE firmware In the following parameters you will find some information on the use of the program; for further d...
Page 23 - Gateway IP Address; character must be inserted at the end.
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 23 Gateway IP Address The IP Address field concerning the Gateway represents the IP Address of an eventual PSTN/ISDN Gateway. The Gateway allows the communication between the VoIP network and the traditional telephone lines (PSTN, ISDN and GSM). If the Vo...
Page 24 - Address Book Upgrade
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 24 3.2 Address Book Upgrade Through the Address Book Upgrade you can send the address book created with the Address Book Management . After selecting Address Book Upgrade choose the address book file to be sent. Insert the IP address, UserID and Password ...
Page 25 - Configuration Example; Here is an example to use the VoiceGate and its configuration.
Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 25 Configuration Example Here is an example to use the VoiceGate and its configuration. In teh following application there are two VoiceGATE (one in the main office and the other one in the branch office) and no Gatekeeper is required. We will use the int...
