Digicom 8D5499 - Manuals

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 5 1.1 LED Description The VoiceGATE status can be checked through seven led indicators. Lan x Indicates the LAN ports status Off: no device connected On: device connected Line x Indicates the status of the two telephone lines Off: device not registered at...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 6 2.0 Configuration VoiceGATE can be configured using a Web browser. (Explore, Netascape, etc). This chapter describes the test to carry out on the computer to enter the configuration and the procedure to save the mofications in the configuration. In the ...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 7 2.2 Access to configuration 1. Run the browser and connect to http://192.168.2.1. When the connection is established, the following window will appear: Insert in the User Name field: admin Insert in the Password field: voicegate NB: User name and passwo...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 8 Note: in case of problems while displaying the configuration, be sure that no proxy Server is active. In Microsoft Internet Explorer the Proxy setup is in: Tools, Internet Options, Connections LAN, Settings. Menù Description 1. General Configuration It ...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 9 2.3 Save the configuration To confirm the new settings you must press the Submit button at the end of any WEB page. To activate the modifications it is necessary, before you exit the configuration, to enter the Save settings menu and press the Submit bu...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 10 2.4 VoiceGATE Working Test With simple operations you can test at once the working of VoiceGATE. We suggest to follow the procedures described in this chapter so to avoid working problems of VoiceGATE due to wrong configurations. The factory settings o...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 11 2.5 Configuration Menù description General Information The information concerning the Hw and SW version and the elapsed time from the power on are displayed in this window.

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 12 Telephony Configuration The voice information are displayed in this window, in particular: Call Setting: defines the Voice working mode. It can be set to work with the Gatekeeper or with the internal address book. Codec Selected: it allows to define th...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 14 Supplementary Services The information concerning the reading and the voice supplementary service setup, according the H.450 standard, are displayed in this window. You will find here a brief description of the various supplementary services. For almos...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 15 H.450.4 Call Hold H.450.4 service allows to put on hold a call and to call another number. Once the two calls have been activated, you can: • Press R + 1 -> To close the active call and recover the on hold call. • Press R + 2 -> To switch from a ...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 16 Public Network Configuration The information concerning the reading and the Wan (Uplink) parameters setup are displayed in this window. Use DHCP to obtain configuration : Enables/Disables the device to DHCP configuration IP Address: Device IP address -...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 17 Private Network Configuration The information concerning the reading and the LAN part parameters are displayed in this window: <----- Attention: do not insert an IP address of the same network used in the WAN configuration “ PublicNetwork Configurat...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 18 Mac Addresses The Mac addresses of the device (Wan and LAN side) are displayed in this window. Public Network Mac: Mac address assigned to the WAN Private Network Mac: Mac Address assigned to the LAN SNMP Agent The information concerning the reading an...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 19 RIP The information concerning the reading and the parameters setup of the RIP protocol are displayed in this window. RIP: Enables/Disables the RIP Silent Mode: OnlyRX – It manages the routing table in reception only RX+TX – It manages the routing tabl...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 20 Route Table The informations concerning the routing table are displayed in this window. Security Configuration The informations concerning the password setup.

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 21 Save Setting In this page it is possible to save the modified configuration via browser, clicking on the Submit button. VoiceGATE will restart to load the new configuration. After about 45 seconds it will be ready to be used. Reset In this page it is p...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 22 3.0 VoiceGATE.exe The VoiceGATE utility allows to : - Create the “AddressBook” - Load the AddressBook in the VoiceGATEs - Upgrade the VoiceGATE firmware In the following parameters you will find some information on the use of the program; for further d...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 23 Gateway IP Address The IP Address field concerning the Gateway represents the IP Address of an eventual PSTN/ISDN Gateway. The Gateway allows the communication between the VoIP network and the traditional telephone lines (PSTN, ISDN and GSM). If the Vo...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 24 3.2 Address Book Upgrade Through the Address Book Upgrade you can send the address book created with the Address Book Management . After selecting Address Book Upgrade choose the address book file to be sent. Insert the IP address, UserID and Password ...

Digicom S.p.A. VoiceGATE Manual rev.2.0 Pag. 25 Configuration Example Here is an example to use the VoiceGate and its configuration. In teh following application there are two VoiceGATE (one in the main office and the other one in the branch office) and no Gatekeeper is required. We will use the int...