Dewalt DCB112 - User Manual

Page 6 - English; EC-Declaration of Conformity; Machinery Directive; Definitions: Safety Guidelines

4 English EC-Declaration of Conformity Machinery Directive Cordless Pivot Reciprocating Sabre Saw DCS310 D e WALT declares that these products described under Technical Data are in compliance with: 2006/42/EC, EN62841-1:2015, EN62841-2-11:2016.These products also comply with Directive 2014/30/EU and...

Page 7 - GENERAL POWER TOOL SAFETY WARNINGS; SAVE ALL WARNINGS AND INSTRUCTIONS; Keep work area clean and well lit.; ) Electrical Safety; Do not expose power tools to rain or wet conditions.; ) Power Tool Use and Care; Batteries; Ah

5 English GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS F...

Page 8 - ) Battery Tool Use and Care

6 English changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d ) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power ...

Page 9 - Checking and Changing the Saw Blade; Residual Risks; SAVE THESE INSTRUCTIONS; Chargers; Electrical Safety; WALT; Using an Extension Cable; WALT

7 English Checking and Changing the Saw Blade • Only use saw blades conforming to the specifications contained in these operating instructions. • Only sharp saw blades in perfect working condition should be used; cracked or bent saw blades should be discarded and replaced at once. • Ensure that the ...

Page 10 - NEVER; Charger Operation; Charge Indicators; Electronic Protection system; Wall Mounting; Battery Packs; READ ALL INSTRUCTIONS

8 English reassembly may result in a risk of electric shock, electrocution or fire. • In case of damaged power supply cord the supply cord must be replaced immediately by the manufacturer, its service agent or similar qualified person to prevent any hazard. • Disconnect the charger from the outlet b...

Page 11 - Transportation; Transporting the FlEXVOlT; Battery; Use; Storage Recommendations; Example of Use and Transport Label Marking

9 English • Charge the battery packs only in D e WALT chargers. • DO NOT splash or immerse in water or other liquids. • Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40 ˚C (104 ˚F) (such as outside sheds or metal buildings in summer). • Do not ...

Page 12 - Labels on Charger and Battery Pack; Battery Type; Technical Data; Package Contents; Markings on Tool; Never modify the power tool or any part of it.; Intended Use; DO nOT

10 English 2. For long storage, it is recommended to store a fully charged battery pack in a cool, dry place out of the charger for optimal results. nOTE: Battery packs should not be stored completely depleted of charge. The battery pack will need to be recharged before use. Labels on Charger and Ba...

Page 13 - ASSEMBLY AND ADJUSTMENTS; To Install the Battery Pack into the Tool Handle

11 English DO nOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.• Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision. • This product is not intended for use b...

Page 14 - MAINTENANCE

12 English during the cut. A 102 mm blade is recommended for best performance. Do not use jigsaw blades with this tool. WARNING: Cut hazard. Blade breakage may occur if the blade does not extend past the shoe and the workpiece during the cut (Fig. H). Increased risk of personal injury, as well as da...

Page 15 - Lubrication; Your power tool requires no additional lubrication.; Cleaning; Protecting the Environment; • Li-Ion cells are recyclable. Take them to your dealer or a

13 English Lubrication Your power tool requires no additional lubrication. Cleaning WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure. WA...