Page 2 - SAFETY GUIDELINES - DEFINITIONS; understand. This information relates to protecting; IMPORTANT SAFETY INSTRUCTIONS
2- ENG A08184 SAFETY GUIDELINES - DEFINITIONS Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situa...
Page 3 - Save these instructions; HAZARD; WARNING: Risk of explosion or fire
3- ENG A08184 IMPORTANT SAFETY INSTRUCTIONS Save these instructions Improper operation or maintenance of this product could result in serious injury and property damage. Read and understand all warnings and operation instructions before using this equipment. HAZARD WARNING: Risk of explosion or fire...
Page 6 - WARNING: Risk of Burns; WARNING: Risk from Moving Parts
6- ENG A08184 WARNING: Risk of Burns Touching exposed metal such as the compressor head or outlet tubes, can result in serious burns. Never touch any exposed metal parts on compressor during or immediately after operation. Compressor will remain hot for several minutes after operation. Do not reach ...
Page 7 - WARNING: Risk of Unsafe Operation; WARNING: Risk of Serious Injury or Property Damage; SAVE THESE INSTRUCTIONS
7- ENG A08184 Review and understand all instructions and warnings in this manual. Become familiar with the operation and controls of the air compressor. Keep operating area clear of all persons, pets, and obstacles. Keep children away from the air compressor at all times. Do not operate the product ...
Page 8 - SPECIFICATIONS
8- ENG A08184 GLOSSARY DUTY CYCLE Accessories for this unit are available at the store the unit was purchased. ACCESSORIES Become familiar with these terms before operating the unit.CFM: Cubic feet per minute.SCFM: Standard cubic feet per minute; a unit of measure of air delivery.PSIG: Pounds per sq...
Page 9 - Assemble Wheels; NOTE: The outfit will sit level if the wheels are properly; ASSEMBLY; Tools Required for Assembly; It may be necessary to
9- ENG A08184 Assemble Wheels It will be necessary to brace or support one side of the outfit when installing the wheels because the compressor will have a tendency to tip.1. Attach wheels with shoulder bolts and nuts as shown. 2. Tighten securely. NOTE: The outfit will sit level if the wheels are p...
Page 10 - INSTALLATION; GROUNDING INSTRUCTIONS; MUST be used with a grounded outlet.; DO NOT USE AN; Inspect the plug and cord before each; IMPROPER GROUNDING CAN RESULT IN ELECTRICAL; HOW TO SET UP YOUR UNIT; Location of the Air Compressor
10- ENG A08184 INSTALLATION GROUNDING INSTRUCTIONS RISK OF ELECTRICAL SHOCK. In the event of a short circuit, grounding reduces the risk of shock by providing an escape wire for the electric current. This air compressor must be properly grounded.The portable air compressor is equipped with a cord ha...
Page 11 - Extension Cords; in good condition; Voltage and Circuit Protection; NOTE: If compressor is connected to a circuit protected by fuses,
11- ENG A08184 Extension Cords Use extra air hose instead of an extension cord to avoid voltage drop and power loss to the motor, and to prevent overheating.If an extension cord must be used, be sure it is:• a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that will...
Page 12 - Description of Operation; OPERATION; Know Your Air Compressor
12- ENG A08184 Description of Operation Become familiar with these controls before operating the unit.On/Auto/Off Switch: Turn this switch "ON/AUTO" to provide automatic power to the pressure switch and "OFF" to remove power at the end of each use.Pressure Switch: The pressure switch...
Page 13 - Before Starting; How to Use Your Unit
Before Starting Break-in instructions Serious damage may result if the following break-in instructions are not closely followed. This procedure is required before the air compressor is put into service and when the check valve or a complete compressor pump has been replaced.1. Make sure the On/Auto/...
Page 14 - pressure is reached. The compressor is ready for use.; MAINTENANCE; Customer Responsibilities; - more frequent in dusty or humid conditions
14- ENG A08184 How to Start: 1. Turn the On/Auto/Off lever to "ON/AUTO" and allow tank pressure to build. Motor will stop when tank pressure reaches "cut-out" pressure. 2. Turn regulator knob clockwise to increase pressure and stop when desired pressure is reached. The compressor is ...
Page 15 - To Check Safety Valve; If the safety valve does not work properly, over-; operate smoothly, it must be replaced with the same type of valve.; To Drain Tank; pressure is approximately 20 psi. Release safety valve ring.; Air Filter Inspection and Replacement; to cool prior to servicing.
15- ENG A08184 NOTE: See "Operation" section for the location of controls. To ensure efficient operation and longer life of the air compressor outfit, a routine maintenance schedule should be prepared and followed. The following routine maintenance schedule is geared to an outfit in a normal...
Page 16 - Air Compressor Pump Intake and Exhaust Valves; SERVICE AND ADJUSTMENTS; To Replace or Clean Check Valve
16- ENG A08184 Air Compressor Pump Intake and Exhaust Valves Once a year have a Trained Service Technician check the air compressor pump intake and exhaust valves. If it is dirty, replace it with a new filter. On some models,the filter may be removed by using a pair of needle nose pliers or a screwd...
Page 17 - To Replace Regulator
17- ENG A08184 8. Apply sealant to the check valve threads. Reinstall the check valve (turn clockwise). 9. Replace the pressure release tube. Tighten nuts.10. Replace the outlet tube and tighten nuts.11. Perform the Break-in Procedure. See "Break-in Procedure" in the Operation section. To Re...
Page 18 - STORAGE; scheduled maintenance as necessary.
18- ENG A08184 STORAGE Before you store the air compressor, make sure you do the following:1. Review the "Maintenance" section on the preceding pages and perform scheduled maintenance as necessary. 2. Set the On/Auto/Off lever to "OFF".3. Turn the regulator counterclockwise and set t...
Page 19 - TROUBLESHOOTING; Check valve seat damaged.
19- ENG A08184 TROUBLESHOOTING Performing repairs may expose voltage sources, moving parts or compressed air sources, moving parts or compressed air sources. Personal injury may occur. Prior to attempting any repairs, unplug the air compressor and bleed off all air tank air pressure. PROBLEM CAUSE C...
Page 20 - Defective check valve.
20- ENG A08184 PROBLEM CAUSE CORRECTION It is normal for "some" pressure drop to occur. If there is an excessive amount of pressure drop when the accessory is used, adjust the regulator following the instructions in the "Description of Operation" paragraph in the "Operation Secti...
Page 22 - AIR COMPRESSOR DIAGRAM
22- ENG A08184 AIR COMPRESSOR DIAGRAM Torque 5-7 ft.-lbs. 5 24 26 27 28 25 9 10 21 15 17 6 10 11 14 18 4 3 Torque 9-12 ft.-lbs. 2 1 Torque 15-25 ft.-lbs. 32 31 Torque 100-120 in.-lbs. 8 29 30 19 23 22 5 20
Page 23 - PARTS LIST; Key; Not Shown
23- ENG A08184 PARTS LIST Key Part No. Number Description 1 ACG-408 Fastener Assembly (2) 2 AC-0376 Mini Shroud 3 91895680 Screw 1/4-20 x 3/4 (2) 4 ACG-18 Cup, Saddle Mount (2) 5 CAC-60 Shoulder Bolt (2) 6 AC-0774 Isolator (3) 8 AC-0605-1 Outlet Tube 9 SSP-7811 Nut Sleeve Assembly 1/4" 10 Z-D230...
Page 24 - AIR COMPRESSOR PUMP DIAGRAM
24- ENG A08184 AIR COMPRESSOR PUMP DIAGRAM Torque 51-63 in.-lbs. Torque 100-120 in.-lbs. Torque 100-120 in.-lbs. Torque 7-10 ft.-lbs. Torque 42-48 in.-lbs. 83 84 85 90 89 87 81 80 91 78 72 70 74 73 76 79 92 93 77 88
Page 25 - KEY
25- ENG A08184 PARTS LIST KEY PART NO. NO. DESCRIPTION 70 SSF-586 Screw 1/4-20 x 3/4 72 AC-0108 Fan 73 SSF-615 Screw 1/4-20 UNC-2A THD 74 Z-AC-0107 Eccentric Bearing Assembly 76 Z-D27268 Motor 77 D28993 Shim ✓ * 78 ----- Cylinder Sleeve ✓ 79 ----- Connecting Rod Assembly ✓ * 80 SSG-8156 O-Ring 81 Z-...
Page 26 - LIMITED WARRANTY
26- ENG A08184 A08184 LIMITED WARRANTY DELTA MACHINERY warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty include air compressors, air tools, service parts, pressure washers, and gen...