Page 2 - C A U T I O N; RISK OF ELECTRIC SHOCK; Increase the separation between the equipment and receiver.
C A U T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to a...
Page 3 - ii; IMPORTANT SAFETY
ii IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s in...
Page 4 - iii
NOTE ON USE ( English ) • Avoid high temperatures. Allow for suffi cient heat dispersion when installed in a rack.• Handle the power cord carefully. Hold the plug when unplugging the cord.• Keep the unit free from moisture, water, and dust.• Unplug the power cord when not using the unit for long per...
Page 5 - iv
iv • DECLARATION OF CONFORMITY ( English ) We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60950-1, EN55022, EN55024, EN61000-3-2 and EN61000-3-3. Following the provisions of 2006/95/EC and 2004/108/EC Di...
Page 7 - ACCESSORIES; – TABLE OF CONTENTS –; A NOTE ABOUT RECYCLING:
1 ■ ACCESSORIES Check first that the following accessories are included in the box: q Stereo Audio Cable ............................................................................................................ 1 w AC adaptor ..........................................................................
Page 8 - FEATURES; Standard function; Advanced Playback; PART NAMES AND FUNCTIONS; y u; PHONES Jack; button; GENERAL INFORMATION
2 FEATURES ■ Standard function • Playback of music files recorded on an SD card/SDHC card (see page 8)• Supporting WAV, MP3 (MPEG-1 Layer III ) • Displaying the ID3 tags of MP3 (See page 9)• Headphones output with trim (see pages 2 and 6)• Analog audio output with trim (balanced/unbalanced) (See pag...
Page 11 - d f
5 1. GENERAL INFORMATION RC-F400S Rear panel DC IN 5V DC IN 5V POWER POWER RS232C RS232C OFF OFF ON ON z x c v z POWER ON/OFF switch • Slide the knob to turn the power on or off. x RS-232C serial connector • Connect the DN-F400 using the RS-232C straight cable supplied with the RC-F400S. (See pages ...
Page 12 - INSTALLATION; Attaching the mounting brackets for a 19-inch 1U half-sized rack; Mounting in a rack; CONNECTIONS; Basic connection
6 INSTALLATION ■ Attaching the mounting brackets for a 19-inch 1U half-sized rack • The DN-F400 is half the size of 1U. Attach the included rack mounting brackets to the DN- F400. Then it can be mounted in an EIA 19-inch rack. • The RC-F400S is of desktop type only. 1. Remove two screws on the side ...
Page 13 - Connecting an audio device; Connection precautions; Attaching the power cord; Inserting an SD card; Removing an SD card
7 2. PREPARATIONS ■ Connecting the DN-F400 and RC- F400S • Use the RS-232C straight cable supplied with the RC-F400S. • After connecting, fix the connector by turning the screws on the connector. ■ Connecting an audio device • Connect an audio device to the analog audio output jacks using the analog...
Page 14 - FILE FORMAT FOR PLAYBACK
8 FILE FORMAT FOR PLAYBACK ■ PCM file format Format Sampling frequency Quantization Bit number Channel File extension PCM 44.1kHz 16bit Stereo wav Mono 48kHz Stereo Mono ■ MP3 file format Format Sampling frequency Quantization Bit number Channel Bit rate (kbps) File extension MP3 44.1kHz 16bit Stere...
Page 15 - DN-F400 display information; RC-F400S display information
9 3. DEVICE OPERATION ■ DN-F400 display information When an SD card is inserted in the DN-F400, setting information, time information, and text information are displayed on the display unit of the DN-F400. Setting information 00:45 PGMR P T \ MUSIC \ Honey.MP3 Text information Time information ■ Tim...
Page 16 - NORMAL PLAYBACK; Before starting playback
10 3. DEVICE OPERATION NORMAL PLAYBACK Before starting playback Before turning the power on, set the MODE switch on the rear panel of the DN-F400 according to the intended use. (See page 11) 1. Set the POWER ON/OFF switch of each device to ON after connecting the DN-F400 and RC-F400S. 1 DN-F400 1 PO...
Page 17 - ADVANCED PLAYBACK; Setting of the MODE switch; Items
11 3. DEVICE OPERATION • When the button is held pressed for more than 1 second, playback is in FF or FR of 2 times speed. (with audio output) • When the button is held pressed for more than 4 seconds, playback is in FF or FR of 10 times speed. (with audio output) • When the button is held pressed f...
Page 18 - Advanced playback using the RC-F400S; Display
12 3. DEVICE OPERATION Advanced playback using the RC-F400S ■ Main mode When the RC-F400S is turned on, the main mode is displayed on the display unit. TIME NOT PLAY FILE LIST HOT LIST Fordidden Par TITLE FILE INFORMATION White Label R ALBUM 256KB SIZE STEREO CHANNEL MP3 256kbps 44.1KHz FORMAT 2-Tra...
Page 19 - Programmed playback; NOT PLAY setting; ENABLE setting
13 3. DEVICE OPERATION 1. Select a folder with the 4 / ¢ jog wheel, and press it. Then the files in the folder are displayed. 2. Press the 4 / ¢ jog wheel to determine the file selection then press the 6 button to start playback. 2. Programmed playback • For a file with the extension “m3u”(playlist ...
Page 20 - Plaese select
14 3. DEVICE OPERATION ■ Hot-start setting 0123456789012345678901234567abcdefg.MP3 abcdefg.MP3 Honey01.MP3 abcdefg05.MP3 FILE LIST 003 abcdefg00.MP3 004 abcdefg01.MP3 005 abcdefg02.MP3 006 abcdefg03.MP3 007 abcdefg04.MP3 --- 009 002 001 EXIT LOAD NOT PLAY \ MPGLANG \ Plaese select HOTSTART button. 1...
Page 21 - Connections; Pin layout; Control command codes; Example
15 4. CONTROL FEATURES RS232C CONTROL Connect the RS-232C straight cable to the RS-232C serial port (D-sub 9-pin). Then the unit can be controlled from external host equipment.• The DN-F400 automatically transmits status data when status is changed.• The DN-F400 will respond to status requests by tr...
Page 22 - Table of Control command codes; Code
16 4.CONTROL FEATURES Table of Control command codes Code Command @ 0TRnnn+CR Track Jump nnn @ 02311+CR DISPLAY @ 02332+CR Track Jump ¢ @ 02333+CR Track Jump 4 @ 02348+CR PAUSE @ 02350+CR RWD : ON @ 0235001+CR RWD : OFF @ 02352+CR FF : ON @ 0235201+CR FF : OFF @ 02353+CR PLAY @ 02354+CR STOP @ 0HP...
Page 23 - Table of Status Request and Status information codes; Mode
17 4.CONTROL FEATURES Table of Status Request and Status information codes When a Status Request Command from the host is received by the DN-F400, the DN-F400 sends the Status Information to the host. When the DN-F400 changes status, the DN-F400 automatically sends Status Information to the host. Mo...
Page 25 - PARALLEL CONTROL; Remote control circuit
19 4.CONTROL FEATURES PARALLEL CONTROL Connections The settings of Pins No. 16 to 20 can be changed with switch No. 6 PARALLEL of the MODE switch on the rear panel of the DN-F400. (See page 11) Pin No. Signal Name I/O 1 Hot Start 1 I 2 Hot Start 2 I 3 Hot Start 3 I 4 Hot Start 4 I 5 Hot Start 5 I 6 ...
Page 26 - Details on error messages and remedies
20 Make sure of the followings before you consider as any malfunctions : 1. Are all the connections correct? 2. Are all system components being operated correctly in accordance with the operating instructions? 3. Are the speakers and amplifier/receiver functioning correctly? If the Unit still does n...
Page 28 - Printed in China
D & M Holdings Inc. Printed in China 09/2009 541110370022P mzh-d
