Delta LCP-8500A4EDR - Manual

Delta LCP-8500A4EDR

Delta LCP-8500A4EDR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
Page: / 14

Table of Contents:

  • Page 2 – Preliminary; Absolute Maximum Ratings; Transmitter; Shall be pulled low to
  • Page 3 – Optical Characteristics; Link Length; 2 except that the transversal filter differential delay is 33 ps.
  • Page 4 – SFP+ Transceiver Electrical Pad Layout
  • Page 5 – Pin
  • Page 6 – Low speed electrical control pins and 2-wire interface; resistor in the
  • Page 7 – SerDes IC; Protocol IC; Recommend Circuit Schematic
  • Page 8 – Package Outline Drawing for Metal Housing with Bail de-latch
  • Page 9 – Timing parameters for SFP+ management; Parameter; not during start up or fault recovery.
  • Page 10 – Enhanced Digital Diagnostic Interface; Digital Diagnostic Memory Map Specific Data Field Descriptions
  • Page 12 – Digital Diagnostic Monitoring Interface; Address
  • Page 13 – Optional Set of Alarm and Warning; Digital Diagnostic Monitor Accuracy
  • Page 14 – Regulatory Compliance
Loading the manual

LCP-8500A4EDR

Preliminary

DELTA ELECTRONICS, INC.

1 2008/7/16

Rev. 0A

www.deltaww.com

RoHS Compliant 8.5Gb/s Short Wavelength SFP+ Transceiver

FEATURES

Compliant with SFP+ MSA, SFF-8431
specification and Fiber Channel FC-PI-4

Compliant with SFF-8472 MSA

850nm VCSEL laser

Built-in digital diagnostic monitoring function

Backward compatible to 2G/4G Fiber Channel

Duplex LC connector

Power consumption

＜

1W

Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2

Description

The LCP-8500A4EDR is hot pluggable 3.3V
Small-Form-Factor transceiver modules designed
expressly for high-speed communication
applications that require rates of up to 8.5Gb/s.

It is compliant with SFP+ MSA, SFF-8431
specification and Fiber Channel FC-PI-4, as well as
MSA SFF-8472.

The LCP-8500A4EDR transceivers provide with the
LC receptacle that is compatible with the industry
standard LC

TM

connector. The transceiver is also

compatible with industry standard RFT connector
and cage.
The post-amplifier of the LCP-8500A4EDR also
includes a LOS (Loss Of Signal) circuit that
provides a TTL logic-high output when an
unusable optical signal level is detected.

The LCP-8500A4EDR transceiver is a Class 1
eye safety product. The optical power levels,
under normal operation, are at eye safe level.

Applications

High-speed storage area networks

Computer cluster cross-connect

Custom high-speed data pipes


"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Preliminary; Absolute Maximum Ratings; Transmitter; Shall be pulled low to

LCP-8500A4EDR Preliminary DELTA ELECTRONICS, INC. 2 2008/7/16 Rev. 0A www.deltaww.com Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature T S -40 85 ºC Supply Voltage V CC 0 4 V Relative Humidity RH 5 95 % Recommended Operating Conditions Parameter Symbol Min. Typ....

Page 3 - Optical Characteristics; Link Length; 2 except that the transversal filter differential delay is 33 ps.

LCP-8500A4EDR Preliminary DELTA ELECTRONICS, INC. 3 2008/7/16 Rev. 0A www.deltaww.com Optical Characteristics (V CC =3.135V to 3.465V, Data Rate=8.5Gb/sec, PRBS=2 7 -1 NRZ, 50/125 µ m MMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) P O -8.2 -1.8 dBm Optical Mod...

Page 4 - SFP+ Transceiver Electrical Pad Layout

LCP-8500A4EDR Preliminary DELTA ELECTRONICS, INC. 4 2008/7/16 Rev. 0A www.deltaww.com SFP+ Transceiver Electrical Pad Layout Module Electrical Pin Definition

Other Delta Models