Delta LCP-155A4HSRx - Manual
Delta LCP-155A4HSRx – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Recommended Operating Conditions; Electrical Characteristics; Transmitter; Receiver
- Page 3 – Optical Characteristics; Mask of the eye diagram for the optical transmit signal
- Page 6 – Recommend Circuit Schematic; SerDes IC; * Depands on SerDes IC us ed
- Page 7 – Package Outline Drawing for Metal Housing with Bail de-latch
- Page 8 – SFP timing parameters for SFP management; Parameter Symbol
- Page 9 – SFP timing parameters:; SFP TX_DISABLE timing during normal operation.
- Page 11 – Blank; Related SFP products
DELTA ELECTRONICS, INC.
1 Sep.,
2006
Rev. 0B
www.deltaww.com
RoHS compliant Small Form Factor Pluggable Transceiver for Fast
Ethernet, ATM, SONET OC-3/SDH STM-1
FEATURES
Compliant with SFP Transceiver MSA
specification
Compliant with Intra-office SONET OC-3 /
SDH STM-1 (I-1)
Compliant with Industry Standard RFT
Electrical Connector and Cage
Single + 3.3V Power Supply and TTL Logic
Interface
EEPROM with Serial ID Functionality
Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Duplex LC Connector interface
Description
The LCP-155A4HSRx series is a hot
pluggable 3.3V Small-Form-Factor transceiver
module designed expressly for high-speed
communication applications that require rates of
up to 155Mbit/sec. It is compliant with the ATM,
SONET OC-3/SDH STM-1 standards, as well as
the SFP Multisource Agreement (MSA) except for
TX fault function is not implemented.
The LCP-155A4HSRx transceivers provide
with the LC receptacle that is compatible with the
industry standard LC connector. The transceiver is
also compatible with industry standard RFT
connector and cage.
The post-amplifier of the LCP-155A4HSRx
also includes a Loss Of Signal (LOS) circuit that
provides a TTL logic-high output when an
unusable optical signal level is detected.
The LCP-155A4HSRx transceiver is a Class
1 eye safety product. The optical power levels,
under normal operation, are at eye safe level.
Applications
SONET OC-3/SDH STM-1
ATM Network
Fast Ethernet
Switch to Switch interface
Switched backplane applications
File server interface
Performance
LCP-155A4HSR (H/T) Data Link up to 2km in
62.5/125
µ
m Multi-Mode Fiber.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DELTA ELECTRONICS, INC. 2 Sep., 2006 Rev. 0B www.deltaww.com Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Supply Voltage V CC 0 5 V Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Note Case Operating Temperature T C -5 70 º...
DELTA ELECTRONICS, INC. 3 Sep., 2006 Rev. 0B www.deltaww.com Optical Characteristics (V CC =3.135V to 3.465V, Data Rate=155Mb/sec, PRBS=2 23 -1 NRZ, 62.5/125 µ m MMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) P O -20 -14 dBm Optical Extinction Ratio ER 9 dB Ce...
DELTA ELECTRONICS, INC. 6 Sep., 2006 Rev. 0B www.deltaww.com Recommend Circuit Schematic Las er Dio d e Pho t o Dio de 1 uH 1 uH 0 .1 u F 1 0u F 0 .1 u F 0 .0 1 uF 0 .0 1 uF 0 .0 1 uF 0 .0 1 uF 0 .1 u F 1 0u F RES1 1 00 Oh ms * RES1 RES1 RES1 1 0k Oh ms 1 00 Oh ms VCC Protocol Vcc SerDes IC Protocol...
