Delta 43-505 - Manual
Delta 43-505 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – GENERAL SAFETY RULES
- Page 3 – SAVE THESE INSTRUCTIONS; Refer to them often
- Page 5 – EXTENSION CORDS; OPERATING INSTRUCTIONS; FOREWORD; UNPACKING AND CLEANING; NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT; MINIMUM GAUGE EXTENSION CORD
- Page 6 – ASSEMBLY
- Page 8 – OPERATING CONTROLS AND ADJUSTMENTS
- Page 9 – OVERLOAD PROTECTION; FENCE ADJUSTMENTS
- Page 12 – INSTALLING ROUTER BITS; STARTING PIN
- Page 14 – OPERATION; ROUTING OR SHAPING WITH COLLARS AND STARTING PIN
- Page 16 – Two Year Limited Warranty; PARTS, SERVICE OR WARRANTY ASSISTANCE
- Page 17 – NOTES
INSTRUCTION
MANUAL
Router / Shaper
(Model 43-505)
PART NO. 902118 (0112)
Copyright © 2001 Delta Machinery
ESPAÑOL: PÁGINA 19
To learn more about DELTA MACHINERY
visit our website at:
www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (
In Canada call
1-800-463-3582).
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 GENERAL SAFETY RULES Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain hazards involved with the operation of the product. Using the machine with respect and caution willconsiderably lessen the possibility of personal inj...
3 ADDITIONAL SAFETY RULES FOR FOR THE ROUTER/SHAPER WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY Fig. B 21. USE A HEAVY WORKPIECE when shaping with starting pin and collar(s). DO NOT SHAPE a short, light workpiece against the collar(s) (Figs. D and E). Fig. D Fig. E F...
Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord whichhas a 3-prong grounding type plug and matching receptacle which will accept the machine’s plug. When using anextension cord, be sure to use one heavy enough to carry the current of the ...
