Delta 36-902 - Manual

Delta 36-902

Delta 36-902 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – CONSTRUCTING UNIFENCE TABLE AND SHELF
  • Page 6 – FOR DELTA TABLE SAWS ONLY; FOR TABLE SAWS OTHER THAN DELTA; FOR ALL TABLE SAWS
  • Page 9 – ASSEMBLING RAIL STOP
  • Page 10 – ADJUSTING RAIL STOP
  • Page 12 – FENCE OPERATION
  • Page 18 – PUSH STICK; CONSTRUCTING A PUSH STICK
  • Page 19 – Two Year Limited Warranty; PARTS, SERVICE OR WARRANTY ASSISTANCE
  • Page 20 – DELTA SERVICE CENTERS; CANADIAN PORTER-CABLE
Loading the manual

INSTRUCTION

MANUAL

Unifence™ Saw Guide

30" Capacity

(Model 36-902)

PART NO. 422-27-655-0068 - 02-14-03

Copyright © 2003 Delta Machinery

To learn more about DELTA MACHINERY
visit our website at:

www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call

1-800-223-7278 (

In Canada call

1-800-463-3582).

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - CONSTRUCTING UNIFENCE TABLE AND SHELF

2 INTRODUCTION The model 36-902, 30" capacity Unifence™ Saw Guide can be assembled to the, Contractors Saw and Unisaw, inaddition to other makes of table saws. The 36-902 Unifence Saw Guide includes the fence, carriage assembly, frontguide rail, table frame and legs. The accessory 36-893 table f...

Page 6 - FOR DELTA TABLE SAWS ONLY; FOR TABLE SAWS OTHER THAN DELTA; FOR ALL TABLE SAWS

6 FOR DELTA TABLE SAWS ONLY 9. Fasten the table adapter plate (B) to the right side of the saw table. Place a 7/16" lockwasher onto a 7/16-20x1" hex head screw (D), insert screw through the tableadapter plate and thread screw into right side of sawtable. Repeat this process for the two remai...

Page 9 - ASSEMBLING RAIL STOP

9 6. Slide the guide rail along until the “0” on the Unifence scale is aligned with the right edge of the saw table. Snugthe hex nuts on the saw and extension table but do nottighten at this time. 7. Adjust the guide rail (C) Fig. 25, parallel with the saw table surface. Place a square (H) on the sa...

Other Delta Models