Page 3 - Contents
Contents 3 Contents 1 About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . .5Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . 7Identifying Parts and Controls . . . . . . . . . . . . . . . . . . .8Mon...
Page 5 - About Your Monitor; Package Contents; Contact Dell
About Your Monitor 5 About Your Monitor Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and Contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may no...
Page 7 - Product Features
About Your Monitor 7 Product Features The Dell UltraSharp 27 Monitor (Model # UP2715K) has an active matrix, thinfilm transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: • 68.5 cm (27-inch) active area display (measured diagonally) with 5120 x 2880 via ...
Page 8 - Identifying Parts and Controls; Front View; Front view; side panel controls
8 About Your Monitor • USB 3.0 Card Reader (SD/Mini SD, HSMS/MSPRO, MMC). • Suppots DisplayPort, Mini DisplayPort sources with DP1.2 with HBR2, DisplayID1.3 with Tile feature. (Do not support DP1.1a and older standard.) Identifying Parts and Controls Front View Front view Volume Input Source Menu ...
Page 9 - Back View; Back view
About Your Monitor 9 Back View 12 34 56 7 8 Back view Back view with monitor stand Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached VESA Cover) Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm). 2 Regulatory label Lists the regulatory approvals...
Page 10 - Side View; Flash-Memory Card Reader slot
10 About Your Monitor Side View Flash-Memory Card Reader slot
Page 11 - Bottom View; Label Description
About Your Monitor 11 Bottom View Label Description Use 1 AC power connector To connect the monitor power cord. 2 Mini DisplayPort connector Connect your computer with:• mDP to mDP cable, or• mDP to DP cablefor 4K2K (max.) resolution. 3a DisplayPort in connector 1 Connect both connectors to your c...
Page 12 - Monitor Specifications; Flat panel Specifications; Display Mode
12 About Your Monitor Monitor Specifications Flat panel Specifications Screen type Active matrix - TFT LCD Panel type In Plane Switching Viewable image dimensionsDiagonalHorizontalVertical 68.5 cm (27-inches viewable image size)596.74 mm (23.49 inches)335.66 mm (13.22 inches) Pixel pitch 0.116mm (...
Page 13 - Electrical Specifications; Video input signals; Speaker Specifications; Speaker rated power; Physical Characteristics; Connector type
About Your Monitor 13 1920 x 1080 67.5 60.0 193.5 2560 x 1440 88.8 60.0 241.5 3840 x 2160 133.3 60.0 297.0 5120 x 2880* 85.6 30.0 238.3 5120 x 2880* 177.7 60.0 483.3 * To display 5120 x 2880 at 60 Hz and 30 Hz, both DP1 and DP2 must be connected. DP source’s graphics card must be DP1.2 certified a...
Page 14 - Reflection Characteristics; Temperature
14 About Your Monitor Height (compressed) 427.6 mm (16.8 inches) Width 637.3 mm (25.1 inches) Depth 204.5 mm (8.1 inches) Dimensions (without stand) Height 384.6 mm (15.1 inches) Width 637.3 mm (25.1 inches) Depth 47.9 mm (1.9 inches) Stand dimensions Height (extended) 420.5 mm (16.6 inches) Heigh...
Page 15 - Power Management Modes; Video; ENERGY STAR
About Your Monitor 15 Altitude Operating 5,000 m (16,404 ft) max Non-operating 12,191 m (40,000 ft) max Thermal dissipation 580.21 BTU/hour (maximum)341.30 BTU/hour (typical) Power Management Modes If you have VESA’s DPM™ compliance display card or software installed in your PC, the monitor can au...
Page 16 - Mini DisplayPort Connector
16 About Your Monitor NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. Pin AssignmentsDisplayPort Connector (DP in and DP out) Pin Number 20-pin Side of the monitor connector Pin Number 20-pin Side of the monitor connector 1 ML0(p) 11 ...
Page 19 - Card Reader Specifications; Overview; Install the Card Reader driver (provided in the Drivers and; Features; The Flash Memory Card Reader has the following features:
About Your Monitor 19 Card Reader Specifications Overview • The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card. • The Flash Memory Card Reader is automatically recognized by Microsoft® Windows® Vista, Windows® 7 Servic...
Page 20 - Maximum Card Capacity Supported by the UP2715K card reader; Supported; General; Plug and Play Capability; Operating the; LCD Monitor Quality and Pixel Policy
20 About Your Monitor Maximum Card Capacity Supported by the UP2715K card reader Card type Support Specification Support Maximum Capacity by Spec. UP2715K MS Pro HG Memory Stick Pro-HG Support USB 3.0 speed 32 GB Supported MS Duo Memory Stick Duo Specification 32 GB Supported SD SD Memory Card sup...
Page 21 - Maintenance Guidelines; Cleaning Your Monitor; Read and follow the
About Your Monitor 21 Maintenance Guidelines Cleaning Your Monitor WARNING: Read and follow the Safety Instructions before cleaning the monitor. WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list ...
Page 22 - Setting Up the Monitor; Attaching the Stand; Safety Instructions
22 Setting Up the Monitor Setting Up the Monitor Attaching the Stand NOTE: The stand is detached from the monitor when it is shipped from the factory. NOTE: This stand attaching instruction is applicable for the stand shipped with the monitor. For other mounting solutions (optional), please refer ...
Page 23 - Connecting the DP cables; Types of DP cables
Setting Up the Monitor 23 Connecting the DP cables Types of DP cables B A DP–DP cables ( 2x ) DP–mDP cables ( 2x ) C D C D Identical cable mDP–mDP cable ( 1x ) E Detachable cable clips Detachable cable clips
Page 29 - Connecting the USB 3.0 cable; The graphics are used for the purpose of illustration only.
Setting Up the Monitor 29 Connecting the USB 3.0 cable After you have completed connecting the DP-mDP cables, follow the procedure below to connect the USB 3.0 cable to the computer and complete your monitor setup:1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port...
Page 30 - Organizing the Cables; Connecting Your Monitor; Attaching the Cable Cover
30 Setting Up the Monitor Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all cables as shown above. Attaching the Cable Cover 1 2
Page 31 - Removing the Stand; To prevent scratches on the LCD screen while removing the stand,
Setting Up the Monitor 31 Removing the Stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface. NOTE: This is applicable for a monitor with a stand. For installation with other mounting solutions (optional), please refer to ...
Page 33 - Operating the Monitor; Using the Front Panel Controls; The following table describes the front panel buttons:
Operating the Monitor 33 Operating the Monitor Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as t...
Page 34 - Accessing the Menu System; Front Panel Button
34 Operating the Monitor 3 Menu Use the Menu button to launch the on-screen display (OSD) and select the OSD Menu. See Accessing the Menu System . 4 Exit Use the Exit button to go back to the main menu or exit the OSD main menu. 5 Power (with power light indicator) Use the Power button to turn the...
Page 35 - Menu
Operating the Monitor 35 Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wai...
Page 46 - Enable; Factory Reset
46 Operating the Monitor DDC/CI DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on your computer. You can disable this feature by selecting Disable . Enable this feature for best user experience and optimu...
Page 47 - OSD Warning Messages
Operating the Monitor 47 OSD Warning Messages When the monitor does not support a particular resolution mode you will see the following message: The current input timing is not supported by the monitor display. Please change your input timing to 5120x2880 @ 60Hz or any other monitor listed timing ...
Page 48 - Setting the Maximum Resolution; Right-click on the desktop and click
48 Operating the Monitor Dell UP2715K There is no signal coming from your computer. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button now to select the correct input source on the On-Screen-Display menu. If either DP or m-DP input is se...
Page 49 - Using the Tilt, Swivel, and Vertical Extension
Operating the Monitor 49 If you have a Dell desktop or portable computer: • Go to www.dell.com/support , enter your service tag, and download the latest driver for your graphics card. If you are using a non-Dell computer (portable or desktop): • Go to the support site for your computer and downloa...
Page 50 - Rotating the Monitor; To use the Display Rotation function (Landscape versus Portrait
50 Operating the Monitor Rotating the Monitor Before you rotate the monitor, your monitor should be fully vertically extended and fully tilted up to avoid hitting the bottom edge of the monitor. 90° 90° 0° 0° 2 1 NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your...
Page 53 - Common Problems; Problem
Troubleshooting 53 Common Problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Problem Cause Solution No Video/Power LED Off No picture • Ensure that the video cable connecting the monitor and the computer is proper...
Page 56 - Product Specific Problems
56 Troubleshooting Product Specific Problems Problem Cause Solution Screen image is too small Image is centered on screen, but does not fill entire viewing area • Check the Aspect Ratio setting in Display Settings OSD • Reset the monitor to Factory Settings . Cannot adjust the monitor with the but...
Page 57 - Troubleshooting the Card Reader
Troubleshooting 57 Troubleshooting the Card Reader CAUTION: Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media. Problem Cause Solution Drive letter is not assigned. (Windows® XP only) Conflict with network drive letter. • – Right-cl...
Page 59 - Appendix; WARNING: Safety Instructions
Appendix 59 Appendix WARNING: Safety Instructions For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces. WARNING: Use of controls, adjustments, or procedures other than those sp...
Page 60 - Setting Up Your Monitor Display; button and adjust the screen resolution to 5120 x 2880.
60 Setting Up Your Monitor Display Setting Up Your Monitor Display Setting the display resolution to 5120 x 2880 (maximum) For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 5120 x 2880 pixels by performing the following steps: In Win...
Page 61 - Font Size Adjustment Guide; Control Panel > Appearance and Personalization > Display
Setting Up Your Monitor Display 61 Font Size Adjustment Guide At resolution 5120x2880 UP2715K is at 218PPI. It is recommended to enlarge the desktop icon for easy viewing. Please follow below guide to change font size to 150% or higher. Windows 7 & 8 Select “Larger - 150%” Control Panel > A...
Page 63 - Content; Windows logo key
Setting Up Your Monitor Display 63 Procedures for setting up dual monitors in Windows Vista®, Windows® 7 or Windows® 8/Windows® 8.1 Content (a) For Windows Vista® (b) For Windows® 7 (c) For Windows® 8/Windows® 8.1 (d) Setting Display Styles For Multiple Monitor (a) For Windows Vista® Connect the e...
Page 65 - For Windows® 7
Setting Up Your Monitor Display 65 (b) For Windows® 7 Connect the external monitor(s) to your laptop or desktop using a DP cable and follow any of the below setup method. Method 1: Using keyboard shortcut “Win+P”1. Press the Windows logo key + P on your keyboard. 2. While holding down the Windows ...
Page 69 - Setting Display Styles For Multiple Monitor; to suit the user preference.
Setting Up Your Monitor Display 69 (d) Setting Display Styles For Multiple Monitor After the external monitor(s) have been set up, users can select the desired display style from Multiple displays menu: Duplicate, Extend, Show Desktop On. NOTE: Please optimize the size of the icons and fonts on mu...
