Dell M6220 - User Manual
Dell M6220 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CONTENTS; FIGURE 1: DELL POWERCONNECT M6220 NETWORKING ARCHITECTURE
- Page 4 – NETWORK ARCHITECTURE OF THE DELL MODULAR SERVER ENCLOSURE; NOTE; Blade 1
- Page 5 – From the Web interface, click the; Restore Configuration Factory Default; option on the; Apply Changes
- Page 9 – Add VLAN; page, enter 101 in the; VLAN ID; field and click; the; Add
- Page 11 – as a tagged interface.
- Page 12 – To view the VLAN Port Table, open the; Show All; CONFIGURING A CISCO IOS ETHERNET SWITCH FOR STATIC VLANS
- Page 13 – : Cisco switches have the Cisco
- Page 16 – Operational Mode: static access
- Page 17 – Administrative Mode: trunk
- Page 18 – The only addition is the; not
- Page 22 – CONFIGURATION LIMITATIONS
- Page 23 – bold; lines were added or changed. The; Switching > Link Aggregation > LAG Membership; appears to indicate that the port belongs to LAG 1.
- Page 25 – interface range Gigabit Ethernet; on
- Page 26 – VLANS AND SPANNING TREE ON THE M6220; Access mode VLAN; untagged
- Page 27 – Bruce Holmes
VLAN
INTEROPERABILITY
OF THE DELL
™
POWERCONNECT
™
M6220
THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY
CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE
CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF
ANY KIND.
Dell and PowerConnect are trademarks of Dell Inc. Other trademarks and trade names
may be used in this document to refer to either the entities claiming the marks and
names or their products. Dell disclaims proprietary interest in the marks and names
of others.
©Copyright 2008 Dell Inc. All rights reserved. Reproduction in any manner whatsoever
without the express written permission of Dell Inc. is strictly forbidden. For more
information, contact Dell.
Information in this document is subject to change without notice.
WITH CISCO IOS OR CISCO
CATOS BASED SWITCHES
By Bruce Holmes
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Dell
- Model
- M6220
- Document type
- User Manual
- Language(s)
- English
- Pages
- 27
- File size
- 348.4 KB
- Format
Other Manuals for Dell M6220
Summary
CONTENTS INTRODUCTION 3 NETWORK ARCHITECTURE OF THE DELL MODULAR SERVER ENCLOSURE 4 CLEARING THE CONFIGURATION FOR THE DELL POWERCONNECT M6220 AND CISCO SWITCHES 4 CONFIGURING THE M6220 PORTS FOR STATIC VLANS 6 CONFIGURING THE M6220 EXTERNAL PORTS FOR STATIC VLANS 7 CONFIGURING A CISCO IOS ETHERNET ...
4 APRIL 2008 MSTP INTEROPERABILITY OF THE DELL™ POWERCONNECT™ 6200 SERIES SWITCHES WITH CISCO IOS AND CISCO CATOS-BASED SWITCHES NETWORK ARCHITECTURE OF THE DELL MODULAR SERVER ENCLOSURE The internal network architecture of the Dell Modular Server Enclosure is shown in Figure 1. Each server blade ha...
5 APRIL 2008 MSTP INTEROPERABILITY OF THE DELL™ POWERCONNECT™ 6200 SERIES SWITCHES WITH CISCO IOS AND CISCO CATOS-BASED SWITCHES From the Web interface, click the Restore Configuration Factory Default option on the System > File Management > Copy Files page, and then click Apply Changes . To s...
