Page 3 - Contents
Contents 1 Working on Your Computer....................................................................................................... 5 Before Working Inside Your Computer ..................................................................................................................... 5 Rec...
Page 5 - Working on Your Computer; Before Working Inside Your Computer
1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions ex...
Page 7 - After Working Inside Your Computer; Important Information
After Working Inside Your Computer After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer. 1. Replace the cover. CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into t...
Page 9 - Removing and Installing Components; System Overview
2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. System Overview Figure 1. Inside View 1. power supply unit (PSU)2. camera3. hard drive4. processor fan 5. coin-cell battery6. heat sink assembly7. heat sink8...
Page 10 - Removing the VESA Stand
9. WLAN card 10. speakers11. input/output (I/O) board shield12. power-supply fan13. power-supply fan bracket14. intrusion switch 15. converter board16. power-button and on-screen display (OSD) buttons board 17. optical drive Removing the VESA Stand 1. Follow the procedures in Before Working Inside Y...
Page 14 - Installing the VESA Mount Bracket
Installing the VESA Mount Bracket 1. Align and place the bracket on the back of the computer. 2. Tighten the screws that secure the VESA mount bracket to the computer. 3. Install the:a) back coverb) VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the Power and On-...
Page 20 - Installing the Hard Drive
5. For a 2.5–inch hard drive, remove the screws that secure the hard drive to the hard-drive bracket. Slide the hard drive from the hard-drive bracket. Remove the screws that secure the hard-drive case to the hard drive. 6. For a 3.5–inch hard drive, remove the screws that secure the hard drive to t...
Page 21 - Removing the Intrusion Switch
c) VESA stand 7. Follow the procedures in After Working Inside Your Computer. Removing the Intrusion Switch 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the:a) VESA standb) back coverc) VESA mount bracketd) system-board shield 3. Disconnect the intrusion-switch cable fr...
Page 25 - Installing the Power-Supply Fan
4. Remove the screws that secure the power-supply fan to the chassis and lift it away from the computer. Installing the Power-Supply Fan 1. Place the power-supply fan on the computer and tighten the screws to secure it to the chassis. 2. Align and place the fan duct from the computer. 3. Tighten the...
Page 26 - Removing the I/O Board Shield
Removing the I/O Board Shield 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the:a) VESA standb) back coverc) VESA mount bracketd) power supply fane) system-board shield 3. Lift the I/O panel away from the computer. 4. Remove the screws that secure the power connector to ...
Page 28 - Installing the I/O Board Shield
Installing the I/O Board Shield 1. Connect the power-connector cable to the system board. 2. Place the I/O board shield on the computer. 3. Pass the power connector and fix it to the socket. Tighten the screws that secure the I/O board shield to the chassis. 4. Tighten the screws that secure the pow...
Page 29 - Installing the Power Supply Unit
4. Remove the screws that secure the PSU to the chassis. Lift the PSU up and remove it from the computer. Installing the Power Supply Unit 1. Place the power supply unit on the computer. 2. Tighten the screws to secure the power supply unit to the chassis. 3. Thread the cable on the hooks in the com...
Page 31 - Installing the Speakers
4. Remove the screws that secure the speakers to the chassis. Lift the speakers from the computer. Installing the Speakers 1. Place and align the speakers on the chassis. Tighten the screws that secure the speaker to the chassis. 2. Thread the cables on the notches. Connect the speaker cables to the...
Page 32 - Removing the System Board; System Board Layout
Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the:a) VESA standb) back coverc) VESA mount bracketd) system-board shielde) memoryf) optical driveg) hard driveh) heat-sink assemblyi) power supply unitj) input/output (I/O) board shieldk) converter ...
Page 34 - Installing the System Board
20. 8–pin power connector Installing the System Board 1. Place the system board on the computer. 2. Connect all the cables to the system board. 3. Tighten the screws to secure the system board to the base panel. 4. Install:a) power-supply fanb) converter boardc) input/output (I/O) board shieldd) pow...
Page 36 - Removing the Antenna Module
d) input/output (I/O) board shielde) power supply unitf) heat-sink assemblyg) hard driveh) optical drivei) memoryj) system-board shieldk) VESA mount bracketl) back coverm) VESA stand 5. Follow the procedures in After Working Inside Your Computer. Removing the Antenna Module 1. Follow the procedures ...
Page 39 - Installing the Display Panel
6. Remove the screws that secure the display bracket to the display panel. Remove the display bracket from the display panel. Installing the Display Panel 1. Tighten the screws to secure the display bracket to the display panel. 2. Place the display panel on the chassis. 3. Place the base panel on t...
Page 40 - Removing the Camera
f) power supply unitg) power-supply fanh) converter boardi) power and OSD buttons boardj) intrusion switchk) hard drivel) optical drivem) WLAN cardn) input/output (I/O) board shieldo) system-board shieldp) VESA mount bracketq) back coverr) VESA stand 7. Follow the procedures in After Working Inside ...
Page 41 - Installing the Camera
Installing the Camera 1. Tighten the screws to secure the camera to the chassis. 2. Connect the camera cable and fix the latch. 3. Install:a) display panelb) system boardc) power-supply fand) heat-sink assemblye) power supply unitf) processor fang) converter boardh) power and OSD buttons boardi) int...
Page 43 - System Setup; Boot Sequence
3 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardware • View the system hardware configuration • Enable or disable integrated devices • Set performance an...
Page 44 - System Setup Options
Keys Navigation <Enter> Allows you to select a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop ‐ down list, if applicable. <Tab> Moves to the next focus area. NOTE: For the standard graphics browser only. <Esc> Moves...
Page 53 - Updating the BIOS
Option Description NOTE: This option is relevant only when the Integrated NIC control in the System Configuration group is set to Enable with Cloud Desktop. Advanced This option turns on the Verbose Mode for advanced debugging. By default, this option is not enabled. NOTE: This option is relevant on...
Page 57 - Technical Specifications
4 Technical Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start (Start icon) → Help and Support, and then select the option to view information about your computer. Table 14. System Information Feature Specification Proces...
Page 63 - Contacting Dell
5 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, ...
