Daikin Remote Controller BRC1C61- User Manual

Daikin Remote Controller BRC1C61– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – NOTE
Page 3 – Wired Remote Controller; Installation; Remove the upper part of remote controller.
Page 4 – Reattach the upper part of remote controller.; Be careful not to pinch the wiring when attaching.; Set one remote controller to“main,” and the other to “sub.”; Wiring Type
Page 5 – FIELD SETTING; Procedure
Page 6 – Various Control by Liquid Crystal Remote Controller

Loading the manual

BRC1C62

ED39-634

Wired Remote Controller

1. BRC1C62

BRC1C62

Easier to read because LCD screen is larger.

Digital display lets you set temperature in 1°C units.

Lets you individually program by timer the respective times for operation start and stop within a maximum of 72
hours.

Equipped with a thermostat sensor in the remote controller that makes possible more comfortable room
temperature control.

Enables you to select cool/heat/fan operation mode with the indoor remote controller of your choice without using
the cool/heat selector.

Constantly monitors malfunctions in the system for 80 items, and is equipped with a "self-diagnosis function" that
lets you know by message immediately when a malfunction occurs.

Lets you carry out various field settings by remote controller.

Enables you to select the ventilation mode and the volume of the HRV.

The rubber switch and the oil-resisting resin casing have been adopted for durability.

*When the auto-swing function is not available, the message, THIS FUNCTION IS NOT AVAILABLE is displayed
when the wired direction adjustment button is pressed.

Dimensions

Operation Functions with HRV

BRC1C62

ON / OFF Operation with Air Conditioner

Independent operation in intermediate season

Ventilation mode change over (Auto / HRV / Normal)

Air flow change over (Auto / High / Low)

Setting of precooling / preheating

Setting of fresh-up operation

Filter sign display

: Initial Setting Only (Field setting by well known service person)

3D028952

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - NOTE

ED39-634 BRC1C62 Wired Remote Controller 51 3 1. On/off button Press the button and the system will start. Press the button again and the system will stop. 2. Operation lamp (red) The lamp lights up during operation. 3. Display “ ” (changeover under control) It is impossible to changeover heat/cool ...

Page 3 - Wired Remote Controller; Installation; Remove the upper part of remote controller.

BRC1C62 ED39-634 52 Wired Remote Controller Installation Switch Box (Field supplied parts) MachineScrews(M4 x 16) 1.Remove the upper part of remote controller. Insert minus screwdriver into the slots in the lower part ofremote controller (2 places), and remove the upper part ofremote controller. The...

Page 4 - Reattach the upper part of remote controller.; Be careful not to pinch the wiring when attaching.; Set one remote controller to“main,” and the other to “sub.”; Wiring Type

ED39-634 BRC1C62 Wired Remote Controller 53 3 Lower part ofremote controller Upper Part ofRemote controller PC Board Indoor Unit P1, P2 Indoor Unit P1, P2 (Wired from the top) (Wired from the rear) Notch the part for the wiring topass through with nippers, etc. Ground the shieldedpart on the indooru...