Page 2 - PROJECTION TV; CAUTION
PROJECTION TV -1- CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is inte...
Page 3 - IMPORTANT SAFEGUARDS; Read, Retain and Follow All Instructions
IMPORTANT SAFEGUARDS -2- 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructionsfor future reference. Follow all operating and use instructions. 2. Heed Warnings Adhere to all warnings on the applian...
Page 5 - Warning
Warning -4- This section must be read carefully and followed by theuser prior to the operation of the product. The manual states important instructions for the user's own safety, and the proper operation of the product. In case of an accident, please unplug the unit from the outlet immediately. Hold...
Page 6 - Caution
Caution -5- Please keep the user's manual in a safe place for future reference. This section must be read carefully and followed by the user when installing and transporting the product. Do not put volatile substance-such asbenzene, naphtha- near the product since itmay cause a change in the product...
Page 7 - This product has advantages as follows.; Make Sure of Auxiliary Parts.; Large Screen; OPTIONAL ADJUSTMENT OF SOUND; Adopts Dolby Virtual; Information for setting up the TV
This product has advantages as follows. -6- Make Sure of Auxiliary Parts. INSTR UCTIO N MA NUAL REAR PROJECTION TV D J - 4 7 1 0 / 5 5 1 0 D J - 4 7 2 0 / 5 5 2 0 D J - 4 7 1 0 E / 5 5 1 0 E D J - 4 7 2 0 E / 5 5 2 0 E P/N: 4858 6113 E203 -R0 VIR TUA L DO LBY PIC TUR E ASP EC T DIS PLA Y MO DE D Y N...
Page 8 - Table of Contents; Installation and Maintenance
Table of Contents -7- Installation and Maintenance Antenna Connection 8 Video Connection 11 Camcorder & Video Game Connection 12 DVD Connection 13 Cable TV Broadcasting Connection 14 Name of Each Part 16 Basic Guide Method To Use Basic Menu 20 To Watch TV 21 Setting Up TV Stations 23 Selection o...
Page 9 - Antenna Connection; Connect the feeder cable of the antenna to the combining adapter.; WHEN THE IMAGE IS NOT CLEAR; Indoor Antenna Connection
Antenna Connection -8- 1. Connect the feeder cable of the antenna to the combining adapter. 2. Connect the combining adapter to the antenna input at the back of the TV set. COMPONENT AUDIO L R Cr Cb Y ANT AV3 AV2 AV1 WHEN THE IMAGE IS NOT CLEAR Unclear screen image and badreception may be a cause of...
Page 10 - CTV Antenna Connection
-9- Such community TV Antenna installation may be found in most of co-op apartments. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. When a feeder cable is used ANT/CABLE ANT/CABLE CTV Antenna Connection
Page 11 - Single Antenna Connection.; Outdoor Antenna Connection
COMPONENT AUDIO L R Cr Cb Y AV3 AV2 AV1 -10- Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at privatehouses Single Antenna Connection. Separate Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE ANT/CABLE Outdoor Antenna Connection
Page 12 - Video Connection; connection with the AV4 input.; Connecting with SCART VIDEO; Connecting with an External Source
Video Connection -11- You may connect S-Video input to enjoy clearer and brighter picture images. You can make the connection with the AV4 input. Connection is not necessary in Mono mode. Connecting with SCART VIDEO 1. Prepare the scart lead for picture / sound.2. Connect the SCART input / output te...
Page 13 - Camcorder & Video Game Connection; Video game; Watching the Camcorder Recording on TV
Camcorder & Video Game Connection -12- -Use the input jack provided at the side panel of the TV set. -Use the same connection method for Video Game. Video game Watching the Camcorder Recording on TV
Page 14 - DVD Connection; DVD
DVD Connection (Component Video Method) -13- -480i input signal is possible for DVD input. -DVD screen output is composed of three separate primary colour jack(Y/Cb/Cr), resulting in a higher image quality. -Y/Cb/Cr, may also be noted as Y/PB/PR or Y/Pb/Pr in different DVD players. -The DVD player s...
Page 15 - Cable TV Broadcasting Connection; External Input Connection Source
Cable TV Broadcasting Connection -14- Watching cable television is only possible after you have subscribed to the local broadcasting company andinstalled a cable receiver. You may make the connection to any of the Component input and SCART input AV1,AV2 & AV3. External Input Connection Source AV...
Page 16 - Antenna Input Connection; Cable TV
-15- Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. Antenna Input Connection Cable TV Broadcasting Station
Page 17 - Name of Each Part; Front Panel
Name of Each Part -16- Buttons on the TV set have the same function as those of the remote controller. Front Panel Front Panel Button If you turn the TV set off by pressing the ON/OFF button at this panel, it is as unplugging thepower cord from the outlet since this will prevent all operation of bot...
Page 18 - Side Panel; Rear Panel; Side and Rear Panel
-17- COMPONENT AUDIO L R Cr Cb Y AV3 AV2 AV1 Side Panel It is convenient to use the input jacksprovided at the side panel when connectingto the camcorder or Video Game. Rear Panel COMPONENT AUDIO L R Cr Cb Y AV3 AV2 AV1 Side and Rear Panel
Page 19 - Parts of the remote controller
-18- VIRTUAL DOLBY PICTURE ASPECT DISPLA Y MODE DYNAM IC BASS ZOOM OK STILL SOUND MODE This remote controller is universal; thus, it may be convertible for TV, Video, CTV, etc. Power Recall Program number (0-9) Use to select channel directly 0~9 Sleep This feature is used to set up the time ofautoma...
Page 21 - Method To Use Basic Menu; P i c t u r e; Press the “Menu” button.; Press the “; Basic Menu
Method To Use Basic Menu -20- - The basic menu appears on the screen if you press the menu button of the remote control.- There are 5 items Picture, Screen, Sound, Function, and Install in the basic menu.- Each item has sub-items under it. If the desired item is selected, the relevant sub-items are ...
Page 22 - To Watch TV; When pressing the Program button; To suddenly turn sound off; Check of TV operation status
To Watch TV -21- - Buttons with same name in the main body performs same function. On/Off, Number, Mute, Recall, ◀/▶/▼/▲ VIRTUAL DOLBY PICTURE ASPECT DISPLA Y MODE DYNAMIC BASS ZO O M OK STILL SOUND MODE When pressing the Program button • Select two digits if using the number button for channel sele...
Page 23 - Press the “Power” button for turning the TV off.; TO Watch TV
-22- Press the “ON/OFF” button. • Press the “ON/OFF” button of the main body. • The main power lamp turns on in red colour. • Press the “Power” button of the main body or the “Power” button of theremote control. • The main power lamp turns on in “green” colour and the TV turns on. ON/OFF Press the “...
Page 24 - Setting Up TV Stations; Auto Tuning; Repeatedly press the Menu button to select the Install menu.; Select the “Auto Tuning”.
Setting Up TV Stations -23- - All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. Auto Tuning Repeatedly press the Menu button to select the Install menu. Position Access MENU Exit Mode Brightness Contrast Colour Sh...
Page 25 - Press the VOL; Select the country you require with “
-24- Press the OK button. • Auto tuning will begin, your stations will be located andstored. OK Start Country Set MENU Exit Auto Tuning Country Set Please wait ! PR 19 Pal / Secam Norway DISPLA Y MODE D YN AM IC BA SS ZO O M O K Please wait until the Edit menu appears. • If you don’t want to edit pr...
Page 26 - Edit; Deleting the program positions; Moving the program positions; Enter a station name
-25- The Edit menu shows you information as follows: - Program position assignment : Program number and Station name, Real channel number. - Picture information : PAL, SECAM, SECAM-L - Sound information : Auto, L, DK3, DK2, DK1, I, BG - Skip : information : Yes, No Edit VIRTUAL DOLBY PICTURE ASPECT ...
Page 27 - Manual tuning; PR
-26- VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Manual tuning Press the Number buttons(0~9) or the “ ▼ PR ▲ ” button to select a program number you want. DISPLA Y MODE D YN AM IC BA SS ZO O M O K Locate the selection bar on the Manual tuning atthe Inst...
Page 29 - Fine tuning; VOL; Note that if only operates while the “
-28- - If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the Fine tuning. Fine tuning VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Move the selection bar to Fine tuning and press the“ ◀ ◀ VOL...
Page 30 - Selection of Input Signal; Cautions in menu setup
Selection of Input Signal -29- - See 11p for connection method of TV and “Video”. When watching video, Camcorder, DVD, Cable TV VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Press the “ (AV)” button. • Screen changes as follows whenever pressing the “ (AV...
Page 31 - Screen Adjustment; When setting up various screen modes; Press the “Picture” button.
Screen Adjustment -30- - The user may select various screens designed for a good picture without adjusting the brightness, contrast or colour individually. When setting up various screen modes VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Press the “Pictu...
Page 32 - When adjusting the screen to taste; Select “Picture” by pressing the “Menu” button.; Select the item desired to adjust and press the “; Notice
-31- - You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user’s taste. When adjusting the screen to taste VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Select “Picture” by pressing the “Menu” button. • The menu...
Page 33 - Adjustment of Screen Size; Press the “Aspect” and “Zoom” button.
-32- - Randomly change the size of the screen. Pleasure for enjoying the TV increases further.- The AUTO screen operates when power is turned on firstly. Adjustment of Screen Size VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Press the “Aspect” and “Zoom”...
Page 34 - Adjustment of Colour Match; Convergence; Select “Convergence”.
Adjustment of Colour Match -33- - This function enables you to adjust the colour convergence of the screen during receiving the signals. When the set is first installed or it is relocated, the picture may be unstable with three colour(Red, Green, Blue). This problem can be solved by adjusting the co...
Page 36 - Setup of Child Lock; Still; Press the “Lock” button.; Still of Main Screen
-35- - This is function to prevent the use of the TV set without the remote control. Setup of Child Lock VIRTUAL DOLBY PICTURE ASPECT DISPLA Y MODE DYNAMIC BASS ZOOM OK STILL SOUND MODE Still - This is the function to temporarily stop the main screen or the auxiliary screen currently watched. - You ...
Page 37 - Sound Adjust; Press the “Sound Mode” button.; When selecting various sound modes
Sound Adjust -36- Press the “Sound Mode” button. • The sound status changes while the following screens display inturn whenever pressing the SoundMode button. SOUND MODE VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE When selecting various sound modes
Page 38 - When adjusting sound to taste; To adjust the audio equalizer; Select “Sound” by pressing the “Menu” button.; Select items desired to adjust and press the “
-37- VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE When adjusting sound to taste - The user can enjoy various the sounds by adjusting Sound Mode, Equalizer, Virtual Dolby, Dynamic Bass and Balance To adjust the audio equalizer • Select and use the relevan...
Page 39 - Select Virtual Dolby Mode; Select Dynamic bass Mode
-38- Select Virtual Dolby Mode • You can perceive, orientation and a cubic effect through the left/right speaker by developing the existing surroundsystem function. • If you select “Virtual Dolby” or, Panorama and 3D Panorama which is repeated whenever you press the“VOL ▶ ” button. • You can also op...
Page 40 - Multi-Sound and Stereo; Press the “ ” button.; Mono Sound Selection; Language Selection for bilingual broadcast.
-39- Multi-Sound and Stereo VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Press the “ ” button. • The status changes whilst the following screenssequentially appear whenpressing the button. VIRTUAL DOLBY PICTURE ASPECT STILL SOUND MODE P R 1 9 C l o c k 1...
Page 41 - Select “Function” by pressing the “Menu” button.; Select “Timer”; Adjustment of Time
Adjustment of Time -40- Select “Function” by pressing the “Menu” button. • The menu screen appears as follows. DISPLA Y MODE D YN AM IC BA SS ZO O M O K Select “Timer” • A screen appears as in the right if you select Timer • You can setup “current time”, “wake up time” and“off time” etc. DISPLA Y MO...
Page 42 - Setting the Time; Automatic clock setting and correction; Setting the Wake up time / Program
-41- VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Adjustment of Time Setting the Time • Place the cursor to Hour / Minute with “ ◀ VOL ▶ ” buttons. • Set the Hour / Minute with the “ ▼ PR ▲ ” buttons. • Place the cursor to Time with “ ◀ VOL ▶ ” buttons a...
Page 43 - Select the “Function” after pressing the “Menu” button.; Press “Timer” for selection.; Select “Off Time” by pressing the “
-42- The red lamp turns on whether setting up either Off-time/ On-time.This function is very convenient since the TV automatically turns off at the fixed time if reserving the Off-time forsleeping time or at desired time. If adjusted once, this function operates everyday unless you cancel the Off-ti...
Page 44 - Press the “SLEEP” button.; Choosing Set Amounts of Minutes Before Sleep Time
-43- - This function is designed to turn off the TV after a fixed amount of time (10min~120min) has passed from the current time. - Adjust sleep time with sleep button on the remote control. Press the “SLEEP” button. • Sleep timer Off → Sleep timer 10 → Sleep timer 20 → Sleep timer 30 → Sleep timer ...
Page 45 - Selection of Language
Selection of Language -44- Selection of Language This function enables you to select the language of the on screen menus displayed on the TV screen. VIRTUAL DOLBY PICTURE ASPECT D IS P LA Y M O D E D YN AM IC BA SS ZOOM OK STILL SOUND MODE Press the menu button and select “Function” DISPLA Y MODE D ...
Page 46 - Teletext
Teletext -45- Switching Teletext ON/OFFPress the Text button ( )The index page or the page viewed last will appear.Press the Text button again to return to the TV mode.Colour buttons in TOP/FLOF TeletextA red, green, yellow and cyan field is shown at the bottom of the screen.If TOP or FLOF Teletext ...
Page 47 - Troubleshooting; Symptoms and Solutions
Troubleshooting -46- Symptoms and Solutions Please check the following list prior to calling Daewoo Electronics Service Centre for assistance Is the TV power cord pluggedinto the outlet correctly?Please check the power cordand connect it properly to theoutlet.Press the main power button atthe front ...
Page 48 - Standard of Product
Standard of Product -47- Model DJ - 4710/5510, DJ - 4720/5520, DJ - 4710E/5510E, DJ - 4720E/5520E Band I : CH02 ~ CH04 VHF Band II : CH05 ~ CH12 Receipt Channel Cable Band : S1’ ~ S3’, S1 ~ S20 UHF Hyper Band : S21 ~ S41 Band IV, V : CH21 ~ CH69 Screen Size 119cm(47”), 139cm(55”) Signal Method PAL /...
