Page 2 - FCC Warning; CE Mark Warning
DSL-210 USB ADSL Modem User’s Guide i FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installati...
Page 3 - TABLE OF CONTENTS
DSL-210 USB ADSL Modem User’s Guide ii TABLE OF CONTENTS About This User’s Guide ........................................................................................IV Guide Overview ....................................................................................................................
Page 5 - About This User’s Guide; Guide Overview
DSL-210 USB ADSL Modem User’s Guide iv About This User’s Guide This user’s guide provides instructions on how to install the DSL-210 USB ADSL Modem and use it to connect a computer and connect to the Internet. If you are using a computer with a functioning USB port, you can use the Quick Installatio...
Page 6 - Before You Start; Operating System; USB Port; Additional Software
DSL-210 USB ADSL Modem User’s Guide v Before You Start In addition to the Modem hardware and software drivers, you will to gather information before you begin to install the device. Your DSL service provider will give you information required for a successful ADSL connection. You will use this infor...
Page 7 - Microfilters and Splitters; Microfilters; machines and other regular telephone devices.
DSL-210 USB ADSL Modem User’s Guide vi Microfilters and Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services. These devices are commonly referred to as microfilters or sometimes called (inaccurately) line...
Page 8 - Line Splitter; ADSL Service
DSL-210 USB ADSL Modem User’s Guide vii Line Splitter If you are instructed to use a “line splitter”, you must install the device between the Modem and the phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall jack, th...
Page 9 - Encapsulation Method
DSL-210 USB ADSL Modem User’s Guide viii If your ADSL service uses PPP (Point-to-Point Protocol) to establish the connection, you will install the PPPoA or PPPoE driver. Using a PPP connection will be familiar to anyone who has used a conventional dial-up analog modem for Internet connection. PPP is...
Page 10 - Encapsulation Method:
DSL-210 USB ADSL Modem User’s Guide ix Use the tables provided here to record the information you need to install the Modem. SETTINGS TABLE (all users) VPI: VCI: Software Driver: The driver used depends on the connection protocol used for your network services. ¾ Select the PPPoA / PPPoE driver if y...
Page 11 - Unpacking
DSL-210 USB ADSL Modem User’s Guide x Unpacking Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascertain that you have: 1. One DSL-210 USB ADSL Modem 2. One CD-ROM with this User’s Guide and the Quick Installation Guide 3. One twisted-pair telephone cable ...
Page 12 - Chapter 1 - Introduction; Modem Description and Operation
DSL-210 USB ADSL Modem User’s Guide 1 Chapter 1 - Introduction ADSL modem technology is a relatively new technology and may be unfamiliar to the reader. In this section, we introduce you to ADSL technology and give a brief description of its key attributes. W e also give a general description of the...
Page 13 - Product Features; Rear Panel
DSL-210 USB ADSL Modem User’s Guide 2 Product Features The D-Link DSL-210 USB ADSL Modem provides the following features: ¾ G.dmt full rate compliant ¾ G.lite compliant ¾ RFC 1483 (Bridged Ethernet) compliant ¾ RFC 2364 PPP over ATM compliant ¾ RFC 2516 PPP over Ethernet compliant ¾ Compatible with ...
Page 14 - Chapter 2 - Modem Installation; Connect the ADSL; DO NOT CONNECT THE USB CABLE!; the
DSL-210 USB ADSL Modem User’s Guide 3 Chapter 2 - Modem Installation Before you connect the USB cable, you must install the driver. See the next chapter for driver installation instructions. The only cable you should connect initially is the ADSL cable. Place the Modem in a location so that you are ...
Page 15 - Chapter 3 - Software Installation
DSL-210 USB ADSL Modem User’s Guide 4 Chapter 3 - Software Installation The DSL-210 can be used with the following operating systems: ♦ Microsoft W indows 98 Second Edition ♦ Microsoft W indows 2000 ♦ Microsoft W indows Millennium Edition ♦ Microsoft W indows XP The procedures for each system are sl...
Page 16 - Installing the Driver Software
DSL-210 USB ADSL Modem User’s Guide 5 Installing the Driver Software Your new DSL-210 USB ADSL modem is supplied with three different drivers – the CLIP, EoA, PPPoA, and PPPoE drivers. You only need to install one of these three drivers. Do not install more than one driver for you new DSL-210. The c...
Page 17 - Installing the Software Driver; Windows XP
DSL-210 USB ADSL Modem User’s Guide 6 Installing the Software Driver Install the software driver on a computer using the Windows 98 Second Edition, Windows 2000, Windows Millennium Edition (W indows Me) or W indows XP operating system. There are four different drivers, the CLIP, EoA (Bridged/Router)...
Page 24 - Chapter 4 - Connecting to the Internet; Connect with PPPoE and PPPoA Drivers
DSL-210 USB ADSL Modem User’s Guide 13 Chapter 4 - Connecting to the Internet Now that the driver software has been installed, you are ready to establish a connection to the Internet. The connection from your computer to the Internet is actually an indirect connection. You must first get connected t...
Page 25 - Connect with EoA Drivers
DSL-210 USB ADSL Modem User’s Guide 14 3. Once your account information is verified, the computers will complete the connection to the network. This process or “negotiation” can take a few seconds to complete. W hen the negotiation process is finished a “Connection Established” dialog box will appea...
Page 26 - Configure Modem with EoA Driver for Windows XP
DSL-210 USB ADSL Modem User’s Guide 15 do this, your PC must know the DNS server’s IP address. If your ADSL service provider or ISP uses the Dynamic Host Configuration Protocol (DHCP), your computer Configure Modem with EoA Driver for Windows XP 1. From the Start menu go to Programs - ＞ ＞ ＞ ＞ D-Link...
Page 30 - Configure Modem with EoA Driver for Windows 2000
DSL-210 USB ADSL Modem User’s Guide 19 Configure Modem with EoA Driver for Windows 2000 1. From the Start Menu go to Programs - ＞ ＞ ＞ ＞ D-Link DSL-210 - ＞ ＞ ＞ ＞ DSL-210 Control Panel . 2. In the windows please Key in “ Alt+P ”
Page 34 - Configure Modem with EoA Driver for Windows 98SE, ME
DSL-210 USB ADSL Modem User’s Guide 23 Configure Modem with EoA Driver for Windows 98SE, ME 1. From the Start Menu go to Programs - ＞ ＞ ＞ ＞ D-Link DSL-210 - ＞ ＞ ＞ ＞ DSL-210 Control Panel . 2. In the windows please Key in “ Alt+P ”.
Page 40 - Chapter 5 - Monitoring the Modem
DSL-210 USB ADSL Modem User’s Guide 29 Chapter 5 - Monitoring the Modem Once you have installed the Modem you can monitor the status of the ADSL connection by clicking on the connection icon in your System Tray (usually at the bottom-right corner of screen - on the Task Bar). This will open the DSLM...
Page 41 - Appendix A - Technical Specifications
DSL-210 USB ADSL Modem User’s Guide 30 Appendix A - Technical Specifications General Standards: ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) USB 1.1 specifications Protocol: RFC 2364 PPP over ATM Adaptation Layer 5 RFC 2516 PPP over Ethernet RFC 1483 Multiprotocol Encapsulation over ...
Page 42 - Appendix B - Uninstall The Modem; Uninstall for Windows XP; Do not remove the Modem using the device manager. You must use the
DSL-210 USB ADSL Modem User’s Guide 31 Appendix B - Uninstall The Modem If you need to uninstall the Modem, use the Uninstall program available in the DSL-210 Modem folder. Failure to use the Uninstall program can leave files in the system that can cause problems with future installations, including...
