D-Link DSL-210 - Manuals

DSL-210 USB ADSL Modem User’s Guide v Before You Start In addition to the Modem hardware and software drivers, you will to gather information before you begin to install the device. Your DSL service provider will give you information required for a successful ADSL connection. You will use this infor...

DSL-210 USB ADSL Modem User’s Guide vi Microfilters and Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services. These devices are commonly referred to as microfilters or sometimes called (inaccurately) line...

DSL-210 USB ADSL Modem User’s Guide vii Line Splitter If you are instructed to use a “line splitter”, you must install the device between the Modem and the phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall jack, th...

DSL-210 USB ADSL Modem User’s Guide viii If your ADSL service uses PPP (Point-to-Point Protocol) to establish the connection, you will install the PPPoA or PPPoE driver. Using a PPP connection will be familiar to anyone who has used a conventional dial-up analog modem for Internet connection. PPP is...

DSL-210 USB ADSL Modem User’s Guide ix Use the tables provided here to record the information you need to install the Modem. SETTINGS TABLE (all users) VPI: VCI: Software Driver: The driver used depends on the connection protocol used for your network services. ¾ Select the PPPoA / PPPoE driver if y...

DSL-210 USB ADSL Modem User’s Guide x Unpacking Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascertain that you have: 1. One DSL-210 USB ADSL Modem 2. One CD-ROM with this User’s Guide and the Quick Installation Guide 3. One twisted-pair telephone cable ...

DSL-210 USB ADSL Modem User’s Guide 1 Chapter 1 - Introduction ADSL modem technology is a relatively new technology and may be unfamiliar to the reader. In this section, we introduce you to ADSL technology and give a brief description of its key attributes. W e also give a general description of the...

DSL-210 USB ADSL Modem User’s Guide 2 Product Features The D-Link DSL-210 USB ADSL Modem provides the following features: ¾ G.dmt full rate compliant ¾ G.lite compliant ¾ RFC 1483 (Bridged Ethernet) compliant ¾ RFC 2364 PPP over ATM compliant ¾ RFC 2516 PPP over Ethernet compliant ¾ Compatible with ...

DSL-210 USB ADSL Modem User’s Guide 3 Chapter 2 - Modem Installation Before you connect the USB cable, you must install the driver. See the next chapter for driver installation instructions. The only cable you should connect initially is the ADSL cable. Place the Modem in a location so that you are ...

DSL-210 USB ADSL Modem User’s Guide 4 Chapter 3 - Software Installation The DSL-210 can be used with the following operating systems: ♦ Microsoft W indows 98 Second Edition ♦ Microsoft W indows 2000 ♦ Microsoft W indows Millennium Edition ♦ Microsoft W indows XP The procedures for each system are sl...

DSL-210 USB ADSL Modem User’s Guide 5 Installing the Driver Software Your new DSL-210 USB ADSL modem is supplied with three different drivers – the CLIP, EoA, PPPoA, and PPPoE drivers. You only need to install one of these three drivers. Do not install more than one driver for you new DSL-210. The c...

DSL-210 USB ADSL Modem User’s Guide 6 Installing the Software Driver Install the software driver on a computer using the Windows 98 Second Edition, Windows 2000, Windows Millennium Edition (W indows Me) or W indows XP operating system. There are four different drivers, the CLIP, EoA (Bridged/Router)...

DSL-210 USB ADSL Modem User’s Guide 13 Chapter 4 - Connecting to the Internet Now that the driver software has been installed, you are ready to establish a connection to the Internet. The connection from your computer to the Internet is actually an indirect connection. You must first get connected t...

DSL-210 USB ADSL Modem User’s Guide 14 3. Once your account information is verified, the computers will complete the connection to the network. This process or “negotiation” can take a few seconds to complete. W hen the negotiation process is finished a “Connection Established” dialog box will appea...

DSL-210 USB ADSL Modem User’s Guide 15 do this, your PC must know the DNS server’s IP address. If your ADSL service provider or ISP uses the Dynamic Host Configuration Protocol (DHCP), your computer Configure Modem with EoA Driver for Windows XP 1. From the Start menu go to Programs - ＞ ＞ ＞ ＞ D-Link...

DSL-210 USB ADSL Modem User’s Guide 19 Configure Modem with EoA Driver for Windows 2000 1. From the Start Menu go to Programs - ＞ ＞ ＞ ＞ D-Link DSL-210 - ＞ ＞ ＞ ＞ DSL-210 Control Panel . 2. In the windows please Key in “ Alt+P ”

DSL-210 USB ADSL Modem User’s Guide 23 Configure Modem with EoA Driver for Windows 98SE, ME 1. From the Start Menu go to Programs - ＞ ＞ ＞ ＞ D-Link DSL-210 - ＞ ＞ ＞ ＞ DSL-210 Control Panel . 2. In the windows please Key in “ Alt+P ”.

DSL-210 USB ADSL Modem User’s Guide 29 Chapter 5 - Monitoring the Modem Once you have installed the Modem you can monitor the status of the ADSL connection by clicking on the connection icon in your System Tray (usually at the bottom-right corner of screen - on the Task Bar). This will open the DSLM...

DSL-210 USB ADSL Modem User’s Guide 30 Appendix A - Technical Specifications General Standards: ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) USB 1.1 specifications Protocol: RFC 2364 PPP over ATM Adaptation Layer 5 RFC 2516 PPP over Ethernet RFC 1483 Multiprotocol Encapsulation over ...

DSL-210 USB ADSL Modem User’s Guide 31 Appendix B - Uninstall The Modem If you need to uninstall the Modem, use the Uninstall program available in the DSL-210 Modem folder. Failure to use the Uninstall program can leave files in the system that can cause problems with future installations, including...