CyberPower CSP300WU - Manual

5-Outlet Travel Surge

(3 AC & 2 USB ports)

CSP300WU

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSP300WU Surge
Protector. The information contained in this brochure explains the
features and operation of the CSP300WU. Please take a few
moments to read this manual.

FEATURES

1.

USB Charging Ports*

Connect and charge up to two (2) USB devices using the surge
protected USB powering ports.
*USB outlets cannot be used as a USB hub. This device does
not transfer data.

2.

Surge Protected Indicator

Illuminated when the surge protection feature is working properly.

3. AC POWER

Provides surge protected AC power, via three standard AC
outlets and two powered USB ports. If a power overload occurs,
the Travel Surge Protector safely shuts off via a circuit breaker.
To resume operation, simply unplug the unit from the wall outlet
and unplug the device that caused the overload. Then, plug the
Travel Surge Protector back into the wall outlet.

4.

Folding Plug

The AC plug pivots 90-degree. Rotate the plug into the storage
housing when not in use for ease of transportation. When you
are ready to use the plug, simply flip/rotate the plug out to the
90-degree position.

SPECIFICATIONS

•

Model Number: CSP300WU

•

Outlets:

3 Standard Outlets, 2 USB Charger Ports

•

Surge Protection:

918 Joules

•

Electrical Rating:

125V/15A/1875W

•

USB charger rating:

5V/1A total

•

UL Clamping Voltage:

UL 1449 3

rd

/800V (H-N, H-G, N-G)

•

Maximum Peak Current:

45,000A

•

3 AC Lines Protected:

H-N: 15,000A, H-G: 15,000A,

N-G: 15,000A; (The maximum surge possible on household

wiring is 6,000 volts)

•

Response Time:

Less than 1 nanosecond

•

Attenuation:

Up to 43dB

•

EMI/RFI Filtration:

150 kHz to 100 MHz

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK

- Use only in dry

locations and only indoors.

DO NOT

plug into another relocat-

able power tap.

DO NOT

“daisy chain” surge protectors.

DO NOT

use with any aquarium equipment.

DO NOT

use if

properly grounded outlets are not available.

DO NOT

install this

device if there is not at least 10 meters (30 feet) or more of wire
between the electrical outlet and electrical service panel. This
device features an internal protection that will disconnect the
surge protective component at the end of its useful life, but will
maintain power to the load – now unprotected.

TROUBLESHOOTING

If the

“Protection”

(green LED) indicator does not light, the surge

protector’s AC lines is no longer protected from surge. Replace
the surge protector. The surge protector may have received a
power surge or spike beyond its specified limits that overloaded
the protection circuitry and rendered it inactive. The surge
protector has protected your connected equipment, but it will
not protect against future surges and spikes.

TECHNICAL SUPPORT

Please contact our Tech Support department with installation,
troubleshooting, or general product questions.

•

Phone:

1-877-297-6937

•

Email:

[email protected]

•

Hours of Operation:

Monday – Friday, 8:00am – 5:00pm CST

3

© 2012 CyberPower Systems, Inc.
All rights reserved. All other trademarks are the property of their
respective owners.

K09-0000111-00

User Manual

LIMITED WARRANTY AND CONNECTED
EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before using
the CyberPower CPS300WU (the “CPS Product”). By using the
CPS Product, you consent to be bound by the terms and
conditions of this Limited Warranty and Connected Equipment
Guarantee (together referred to as this “Warranty”). IF YOU DO
NOT AGREE TO THE TERMS AND CONDITIONS OF THIS
WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A
FULL REFUND PRIOR TO USING IT.

Who is providing this Warranty, what does it cover?

CyberPower Systems (USA), Inc. (“CyberPower”) provides this
Limited Warranty. It only covers the original purchaser and ends
if you no longer own the CPS Product. This warranty covers
defects in materials and workmanship in the CPS Product under
normal use and conditions. It also covers equipment connected
to the CPS Product and damaged because of the failure of the
CPS Product. This warranty covers the CPS Product and
connected equipment for as long as you own the CPS Product.

What must I do to make a warranty claim?

1. Call (877) 297-6937 or write to CyberPower, 4241 12th Ave.

E., STE 400, Shakopee, MN 55379 or send a message at
[email protected] for instructions.

2. Identify the Product, the Purchase Date, and the item(s) of

Connected Equipment.

3. Provide a dated Proof-of-Purchase receipt (or other proof of

the original purchase) and provide a description of the defect.

4. Pack and ship the product to CyberPower and, if requested,

the item(s) of Connected Equipment, and all claim forms that
CyberPower provides to you. Show the Claim Number on the
shipping label or include it with the product.

You must prepay

all shipping costs, you are responsible for packaging and
shipment, and you must pay the cost of the repair estimate.

5. Do each of these within ten days of the occurrence.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the CPS Product. If the
CPS Product is defective in material or workmanship,
CyberPower will repair or replace it at CyberPower’s expense, or
CyberPower will refund the full purchase price you paid for the
CPS Product (purchase receipt showing price paid is required).

If the CPS Product failed to protect any equipment plugged into
it, we will also send you forms for making your claim for the
connected equipment. We will repair or replace the equipment
that was damaged because of the failure of the CPS Product or
pay you the

fair market value (NOT REPLACEMENT COST)

of the equipment at of the time of the damage. We will use Orion

Blue Book, another a third-party valuation guide, eBay, craigslist,
or other source to establish that amount. Our maximum liability is
limited to $75,000 for the CSP300WU.

Who pays for shipping?

We pay when we send items to you; you pay when you send items
to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT

WAS DAMAGED OR NEEDS TO BE REPLACED DUE TO THE
FAILURE OF THE CPS PRODUCT OR ANY DATA THAT IS
LOST AS A RESULT OF THE FAILURE OR THE
RESTORATION OF DATA OR RECORDS, OR THE REINSTAL-
LATION OF SOFTWARE.

2. This Warranty does not cover: misuse, modification, operation

or storage outside environmental limits of the CPS Product or
the equipment connected to it, or for damage while in transit or
in storage, nor if there has been improper operation or
maintenance, or use with items not designed or intended for
use with the CPS Product, such as laser printers, appliances,
aquariums, medical or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer are those
provided by this Warranty.
1. This Warranty does not apply unless the CPS Product and the

connected equipment were connected to properly wired and
grounded outlets (including compliance with electrical and
safety codes of the most current electrical code), without the
use of any adapters or other connectors.

2. The CPS Product must have been plugged directly into the

power source and the equipment connected to the CPS
Product must be directly connected in the CPS Product, not
“daisy-chained” together in serial fashion with any extension
cords, another Product or device similar to the CPS Product,
surge suppressor, or power tap. Any such installation voids
the Warranty.

3. The CPS Product and connected equipment must have been

used properly in a suitable and proper environment, in
conformance with any applicable license, instruction manual,
or warnings.

4. The CPS Product must have been used at all times within the

limitations on the CPS Product’s VA capacity.

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee,
MN 55379; call us at (877) 297-6937; or send us an e-mail
message at [email protected].

PRODUCT REGISTRATION

Prompt product registration assures coverage under the Limited
Warranty, and also allows the opportunity to be notified of
product enhancements, upgrades, and other announcements.

Registration is quick and easy at www.cpsww.com/register.

CONTACT INFORMATION

CyberPower Systems, Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CPSww.com

CONFORMANCE APPROVALS

This devise is manufactured using environmentally-safe

procedures in compliance with the Restriction on

Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the

environment by recycling this manual.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment. This

Class B digital apparatus complies with Canadian ICES-003.

Note: These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures: Reorient or relocate

the receiving antenna. Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. Consult the dealer or an experienced radio/TV

technician for help.

This device is manufactured using environmentally-safe procedures in

compliance with the Restriction on Hazardous Substances (RoHS) directive.

4

2

1