CyberPower CPUDC1U2000 - Manual

WARNING

IDENTIFYING THE CORRECT VOLTAGE AND POLARITY
SETTINGS FOR THE CONNECT EQUIPMENT AND
ADJUSTING THE PRODUCT ACCORDINGLY IS THE USER’S
RESPONSIBILITY.

Failure to adjust the adapter settings to match the
requirements of the connected device can result in damage to
the device.

1.

Identify the correct plug tip that fits in the device you wish
to power.

2. Identify the polarity required for the device you are

connecting. The polarity will typically be identified in
either the user’s manual or on the input specifications on

the device itself (see ‘Polarity Markings’ section). Flip the

switch on the body of the adaptr to match the polarity
symbol on the device itself. If the device is not polarized,
either setting can be used. If the device does not have
a polarity specification, contact the manufacturer of the

device and ask them. Using an incorrect polarity can
damage the device.

3.

Set the voltage switch to the required voltage for the device
you are connecting. The voltage required will typically
be identified in either the user’s manual or on the input
specifications on the device itself. If you cannot determine
the proper voltage, contact the manufacturer of the device

and ask them. Using an incorrect voltage can damage
the device.

4. Plug the adapter cord into the device then plug the

CyberPower Universal DC to DC adapter into the 12V DC

outlet or cigarette lighter outlet in your vehicle. If the device

does not function, unplug the adapter power cord from the

outlet immediately. Check to make sure the voltage and

polarity settings being used are correct.

PolARIty MARkINGs

When looking for polarity markings on the device you wish to
power with the CyberPower Universal DC to DC adapter, they
will typically be identified as such:

Depending on the device, the orientation of the positive and
negative poles in the depiction may be reversed but, if the
device requires positive polarity, the ‘–’ symbol will be on the
side with the ‘C’ shaped arc. If negative polarity is required,
the ‘+‘ symbol will be on the side with the ‘C’ shaped arc.

1 yeAR lIMIted WARRANty

CyberPower warrants the Universal Power Adapters to be

free from defect in material or manufacturing for one years.

If a defect results in product failure during its normal use,
CyberPower’s sole responsibility is to repair or replace (as
its sole option) the Universal Power Adapter. The foregoing

Limited Warranty is the consumer’s sole and exclusive remedy
and excludes any incidental or consequential damages. Some

States do not allow the exclusion or limitation of incidental
and consequential damages, so certain parts of the above

limitations or exclusions may not apply to you (the Consumer).

This limited warranty gives the Consumer specific legal rights
and the Consumer may have other rights, which vary from

State to State.

To make a warranty claim call technical support

toll-free at 1-877-297-6937 between 8am and 5pm CST,
Monday – Friday.

CoNtACt INFoRMAtIoN

CyberPower Systems, Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CPSww.com

UNIveRsAl dC to AC AdAPteR

CPUdC1U2000

UseR MANUAl

K01-0000253-00

© 2012 CyberPower Systems, Inc. All rights reserved.

All other trademarks are the property of their

respective owners.