CyberPower CPS725SL - Manual

Page 3 - Guaranteed Uninterruptible Power System; IMPORTANT SAFETY INSTRUCTIONS (SAVE THESE INSTRUCTIONS); INSPECTION

CPS725SL Guaranteed Uninterruptible Power System 1 IMPORTANT SAFETY INSTRUCTIONS (SAVE THESE INSTRUCTIONS) This manual contains important safety instructions. Please read and follow all instructions carefully during installation and operation of unit. Read this manual thoroughly before attempting to...

Page 4 - Hardware Installation Guide; recharging the battery for at least four hours; DO NOT plug a laser printer,; POWERPANELTM SOFTWARE; OVERVIEW

2 HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT 1. Make sure that the total Volt-Amp (VA) requirements of your computer, monitor and peripheral equipment does not exceed 725 VA. 2. Insure that the equipment plugged into the three battery power-supplied outlets does not exceed the UPS uni...

Page 5 - Scheduled Shutdown; INSTALLATION GUIDE; For Windows NT

CPS725SL Guaranteed Uninterruptible Power System 3 matically shutdown to conserve battery power. Files with auto-assigned names will be saved under C:\PCTemp , where C is the name of your main hard drive. Files that have previously been saved will be saved in their original location. PowerPanel™ is ...

Page 6 - Oprating Instruction; PowerPanelTM Main Window Description; PowerPanelTM Setup Window (See Figure 2 )

4 10. Click on Start , point to Settings , and then click Control Panel . 11. Double-click on Add / Remove Programs . 12. Click the Install Button , and follow the on-screen instructions. 13. When the installation is completed, remove the floppy disk. For Windows XP (Home and Professional) 1. Click ...

Page 7 - Using the Windows NT UPS Service

CPS725SL Guaranteed Uninterruptible Power System 5 PowerPanel™ Log Window (See Figure 3 ) 1. Display Window: This area displays either the Event Log or the Closed Application Informa- tion . 2. Event Log: Select this option to view Power- Panel™ events such as program start, program end, power failu...

Page 8 - Testing Your UPS System; C drive; REPLACING THE BATTERY; TACT WITH GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK!

6 Please note: This service must be stopped in order to run PowerPanel™ . To disable the service, set the Manufac- turer to None. Please note: You must be logged on as an administrator or a member of the administrator’s group to make these changes. Network policies may also prevent you from making t...

Page 9 - HAZARDOUS WASTE; CONDITION

CPS725SL Guaranteed Uninterruptible Power System 7 7. Disconnect the battery wires from the battery. 8. Install the replacement battery by connecting the red wire to the positive (+) terminal of the battery and connecting the black wire to the negative (-) terminal of the battery. 9. Slide the batte...

Page 10 - TROUBLE SHOOTING; Problem; Additional troubleshooting information can be found at

8 TROUBLE SHOOTING Problem Possible Cause Solution Full-time surge protection outlets stop providing power to equip-ment. Circuit breaker has tripped due to an overload. Turn the UPS off and unplug at least one piece of equipment. Wait 10 seconds, reset the circuit breaker by depressing the button, ...

Page 12 - Limited Warranty and Power Control Guarantee; Limited Warranty; REGISTRATION; limitation may not apply to you; Exclusive Remedies Under Limited Warranty.

10 Limited Warranty and Power Control Guarantee In purchasing CPS725SL in the United States or Canada, the original end user receives a Limited Warranty and CyberPower's Power Control Guarantee from Cyber Power Systems (USA), Inc. (for ease of reading, referred to as "CyberPower"). The Limit...

Page 13 - Making a Limited Warranty Claim.

CPS725SL Guaranteed Uninterruptible Power System 11 Making a Limited Warranty Claim. To make a Limited Warranty claim on a Product, you must do the following: 1. Complete and return the CyberPower Warranty Registration Card, or provide reasonable proof of purchase (for example, a sales receipt) that...

Page 14 - Initial Customer shall prepay all; CyberPower’s Duties.; does not

12 1. Complete and return the CyberPower Warranty card or provide reasonable proof of purchase, for example, a sales receipt that establishes you as the original end-user consumer purchaser of the Product. 2. Call CyberPower at (952) 403-9500 or (877) 297-6937 (toll free), write to CyberPower at 555...

Page 15 - ANY SUCH USE IS IMPROPER AND IS A MISUSE OF CYBERPOWER PRODUCTS

CPS725SL Guaranteed Uninterruptible Power System 13 2. As to Connected Equipment, the Power Control Guarantee covers only damage within the specific terms of the Power Control Guarantee to Connected Equipment (and only up to the applicable aggregate ceiling amount). 3. The Power Control Guarantee do...

Page 17 - Avenue East, Suite 110

FCC Notice This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and ca...

CyberPower CPS725SL - Manual

Table of Contents:

Summary

Other CyberPower Models