CyberPower CPBC6200AC - Manual

PACKAGE CONTENTS

• USB Battery Pack (CPBC5200AC Series)

• User Guide

SPECIFICATIONS

Battery Capacity:

5200mA

Rated Input:

AC 100~240V, 50/60Hz 0.4A

Rated Output:

DC 5V 2.1A (Max.)

PC Charging time:

~6 Hours

Dimension:

4.26x2.2x0.96 inch

Weight:

5.93 oz

Environment:

Storage: 14 to 122°F (-10 to 50°C)

Operation: 32 to 104˚F (0 to 40˚C)

SUGGESTED - PRIOR TO FIRST USE:

It is recommended that you charge

your CPBC5200AC Series batter y pack for

10 hours to insure a full charge.

CHARGING THE BATTERY PACK

Charge the USB Battery Pack by putting the plug into an AC

socket. When charging the battery pack, the LED indicator will

light up automatically. Press the button to turn it off and press

it again to switch the LED indicator on. Recharge the

CPBC5200AC Series every 3 months when not in use to

maintain peak battery performance. The battery capacity may

decline after 300 charging cycles.

SAFETY PRECAUTION

Before using the USB Battery Pack, please read the following

warnings carefully. Use the product according to the

procedures described in this manual. Failure to follow these

safety precautions may result in fire, explosion, electrical shock

or other dangers

1. Store between 14 to 122°F (-10 to 50°C).Operate between

32 to 104°F(0 to 40°C).

2. Do not immerse this product in water or other liquids, as

such use may result in fire or electrical shock. If water or

other liquids enter the battery interior, unplug the product

immediately from any attached power source or device.

　

3. Do not use this product with wet hands. Moisture in or on

this product may result in electrical shock.

4. Store this product in a cool and dry environment when not in use.

5. Do not puncture this product. Puncturing the battery may

cause the release of harmful substances.

6. It is normal for the USB Battery Pack to become warm

during charging.

7. Ensure that all users read these warnings and instructions

before using.

8. Please recycle USB Battery Pack in accordance with local

environmental laws and regulations

9. Do not dismantle, open or shred secondary cells or batteries.

10. Do not expose cells or batteries to heat or fire. Avoid storage

in direct sunlight.

11. Do not short-circuit a cell or a battery. Do not store cells or

batteries haphazardly in a box or drawer where they may

short-circuit each other or be short-circuited by other metal

objects.

12. Do not remove a cell or battery from its original packaging

until required for use.

13. Do not subject cells or batteries to mechanical shock.

14. In the event of a cell leaking, do not allow the liquid to come

in contact with the skin or eyes. If contact has been made,

wash the affected area with copious amounts of water and

seek medical advice.

15. Do not use any charger other than that specifically provided

for use with the equipment.

16. Observe the plus (+) and minus (–) marks on the cell, battery

and equipment and ensure correct use.

17. Do not use any cell or battery which is not designed for use

with the equipment.

18. Do not mix cells of different manufacture, capacity, size or

type within a device.

19. Keep cells and batteries out of the reach of children.

20. Seek medical advice immediately if a cell or a battery has

been swallowed.

21. Always purchase the correct cell or battery for the equipment.

22. Keep cells and batteries clean and dry.

23. Wipe the cell or battery terminals with a clean dry cloth if

they become dirty.

24. Secondary cells and batteries need to be charged before

use. Always use the correct charger and refer to the

manufacturer’s instructions or equipment manual for proper

charging instructions.

25. Do not leave a battery on prolonged charge when not in use.

26. After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times to

obtain maximum performance.

27. Secondary cells and batteries give their best performance

when they are operated at normal room temperature (20

°C ± 5 °C).

28. Retain the original product literature for future reference.

29. Use only the cell or battery in the application for which it

was intended.

30. When possible, remove the battery from the equipment

when not in use.

31. Dispose of properly.

LEGAL NOTICES

FCC Part 15

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency

energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

If the LED indicator extinguishes automatically during the

charging process, press the button to revert.

FCC WARNING

Changes or modifications not expressly approved by the

party responsible for compliance with the FCC Rules could

void the user’s authority to operate this equipment.

LIMITED PRODUCT WARRANTY

CyberPower offers limited product warranty for the hardware

of the USB Battery Pack and the product is free from material

and manufacturing defects for one year. A reasonable

purchase proof with date must be provided when submission.

CyberPower's sole responsibility is to repair or replace the

product if a material or manufacturing defect results in

product failure during its normal use. The warranty is void if

the product is damaged due to abuse, alteration, misuse,

negligence, incorrect voltage supply, air/water pollution,

accidents and natural disasters.

INTRODUCTION

The USB Battery Pack (CPBC5200AC Series) is a high

capacity rechargeable lithium battery designed for

powering up to two mobile devices such as phones, MP3

players, tablets, and handheld gaming devices while away

from other power sources

FEATURES

- Compact and portable design

- Dual output

- Built in AC plug

- Battery life indicator

PRODUCT VIEW:

© 2013 CyberPower Systems, Inc.

All rights reserved. Reproduction in whole or in part without permission is prohibited.

USB BATTERY PACK

USER GUIDE

Model: CPBC5200AC Series

TROUBLE SHOOTING

K09-0000172-00

POWER

YOUR DEVICES

CHARGING THE

POWER PACK

PAD

ITEM

NO.

DESCRIPTION

1

2

3
4
5

Power on/ LED Indicator Switch
Power Off

LED Battery Life lndicator

USB Output Port 1*
USB Output Port 2
AC Input Plug

Press the button
Press and hold for 3 seconds
As the “LED INDICATOR”
table showing

5V/ 2.1A (Max.) USB output

AC 100~240V, 50/60Hz, 0.4A

CONDITION

NO.

LED INDICATION

1

2
3

Battery Life Indicator

Overload
Low Battery

Four LEDs represent 25%,
50%, 75% and 100% battery
life from left to right side.
All four LEDs flash simultaneously.
The first LED light flashes rapidly.

LED INDICATOR

Problem

Possible Cause

Solution

USB Battery
pack does
not recharge

1.Incorrect connection

between charger and

USB Battery Pack.

2.No power from the

source.

Re-attach the USB connector

to the socket.

Check that power is provided

Problem

Possible Cause

Solution

USB Battery
Pack does
not power
the device

1.The device is drawing

too much power.

2.The battery is out

of power

Check the power specification

of the device before charging

with the CPBC5200AC Series.
Charge the battery pack.

*Charge tablets and Apple devices through USB Output Port 1 to achieve fast charging.

1

2

3

4

5

Note:

1. The LED indicator will automatically switch off 5 seconds

after pressing the button.

2. When the battery pack is connected to the power, the LED

indicator will light indicating the charging status. Press the

button to switch off the indicator and press the button again

to switch it back on.

CyberPower Systems (USA), Inc.

4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.

TEL: (952) 403-9500 Toll-Free: (877) 297-6937

FAX: (952) 403-0009 E-mail: [email protected]

CPSww.com