CyberPower CPBC10400 - Manual

Note:

1. The LED indicator will automatically switch off after 5 seconds from

pressing the button.

2. When the battery pack connects to the USB power, the LED indicator will

light indicating the charging status. Press the button for switching off the
indicator, and simply press again to switch on the LED indicator.

PACKAGE CONTENTS

• USB Battery Pack (CPBC10400 Series)

• User Guide

SPECIFICATIONS

Battery Capacity:

10400mAh

Rated Input:

DC 5V, 2A

Rated Output:

USB Output:

5V, 2.1A

Micro USB Output:

5V, 1A

Charging time:

~7 Hours by the 2A power

Dimension:

4.42x3.06x1.05 inch

Weight:

9.14 oz

Environment:

Storage: 14 to 122˚F (-10 to 50˚C)

Operation: 32 to 104˚F (0 to 40˚C)

IMPORTANT! PRIOR TO FIRST USE

The CPBC10400 Series is packaged in a protection mode

for shipping. Prior to use, connect the CPBC10400 Series

to a USB power source to set it to normal mode and the

suggested a full 10-hour charge.

TO CHARGE THE BATTERY PACK

Charge the USB Battery Pack by attaching the USB charging

connector to any powered USB port, including but not limited

to the USB wall charger, desktop computer, laptop or USB

powered hub. When charge the battery pack, the LED

indicator would light up automatically. Press the button to turn

off if it is not required.

Recharge the CPBC10400 Series every 3 months when not

use to ensure the best battery performance. The battery

capacity may decline after 300 times usage.

SAFETY PRECAUTION

Before using the USB Battery Pack, please read the following

warnings carefully. Use the product according to the

procedures described in this manual. Failure to follow these

safety precautions may result in fire, explosion, electrical

shock or other dangers.

1. Do not disassemble this product, or any of its parts.

2. Store between 14 to 122°F (-10 to 50°C).Operate between

32 to 104°F(0 to 40°C).

3. Do not immerse this product in water or other liquids, as

such use may result in fire or electrical shock. If water or

other liquids enter the battery interior, unplug the product

immediately from any attached power source or device.

4. Do not use this product with wet hands. Moisture in or on

this product may result in electrical shock.

5. Do not expose this product to direct flame or leave it in an

overheated condition, as the battery may explode.

6. Store this product in a cool and dry environment when not in use.

7. Do not puncture this product. Puncturing the battery may

cause the release of harmful substances.

8. It is normal for the USB Battery Pack to become warm

during charging.

9. Keep this product out of the reach of children. Ensure that

all users read these warnings and instructions before using.

10. Please recycle USB Battery Pack in accordance with local

environmental laws and regulations

LEGAL NOTICES

FCC Part 15

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates uses and can radiate

INTRODUCTION

The USB Battery Pack (CPBC10400 Series) is a

rechargeable lithium-ion battery with the high capacity that

is designed for powering up to two mobile devices such as

phones, MP3 players, tablets, and handheld gaming

devices while away from other power sources.

FEATURES

- Compact and portable design

- Dual output

- Built in USB input power cable

- Built in micro USB output connector

- Battery life indicator

CyberPower Systems, Inc.

www.cpsww.com

© 2013 CyberPower Systems, Inc.

All rights reserved. Reproduction in whole or in part without permission is prohibited.

USB BATTERY PACK

USER GUIDE

Model: CPBC10400 Series

TROUBLE SHOOTING

K09-0000171-00

CHARGE THE

POWER PACK

ITEM

NO.

DESCRIPTION

1
2
3
4
5

6

USB Input Cable
Micro USB Output Connector
Flash Light
USB Output Port
Power On/ LED Indicator Switch
Power Off
Flash Light On/ Off
LED Battery Life lndicator

5V/ 2A USB input
5V/ 1A Micro USB output
White light
5V/ 2.1A USB output
Press the button
Press and hold 3 seconds
Press twice
As the “LED INDICATOR”

table showing

CONDITION

NO.

LED INDICATION

1

2
3

Battery Life Indicator

Overload
Low Battery

Four LEDs represent 25%,
50%, 75% and 100% battery
life from left to right side.
All four LEDs are flash simultaneously.
The first LED is flashes rapidly.

LED INDICATOR

C.The battery pack is

charging the device

and the power source

is charging the

battery pack

simultaneously.

The device can’t be charged

when the power source is

charging the battery pack.

The solution is to remove the

device from the battery pack.

Power bank
does not
charge

a.Incorrect connection

between charger and

USB Battery Pack.

b.No power from the

source.

C.Short Circuit of

battery pack product

Re-attach the USB connector

to the USB port.

a.Check that power is provided

to the USB port.

b. The battery pack has a low

charge. Recharge the

power battery pack.

Reset the battery pack.

Problem

Possible Cause

Solution

USB Battery
Pack does
not power
the device

a.The power of device

is over specification.

b.The battery is out

of power

Check the power specification

of the device before charging

with the CPBC10400 Series
Charge the battery pack via a

USB port.

PRODUCT VIEW:

1

2

3

4

5

6

radio frequency energy and if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

If the LED indicator extinguishes automatically during the

charging process, press the button to revert.

FCC WARNING

Changes or modifications not expressly approved by the

party responsible for compliance with the FCC Rules could

void the user’s authority to operate this equipment.

LIMITED PRODUCT WARRANTY

CyberPower offers limited product warranty for the hardware of

the USB Battery Pack* and the product is free from material

and manufacturing defects for one year. (*battery excluded) A

reasonable purchase proof with date must be provided when

submission. CyberPower's sole responsibility is to repair or

replace the product if a material or manufacturing defect results

in product failure during its normal use. The warranty is void if

the product is damaged due to abuse, alteration, misuse,

negligence, incorrect voltage supply, air/water pollution,

accidents and natural disasters.