CyberPower CP-MBC - Manual

Table of Contents

Mobile Power Pack User Guide

Checking the Charge Status

Powering Device

Checking the CP-MBC Power Status

Troubleshooting

Introduction

Safety Precautions

Specifications

Radio & Interference Statement

Warranty

Product Components

Item

DC Input

DC Output

Specification

K01-1110000-00

10

11

12

5

3

4

2

1

7

9

8

R e l i a b i l i t y . Q u a l i t y . V a l u e .

R e l i a b i l i t y . Q u a l i t y . V a l u e .

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 2
Package Contents . . . . . . . . . . . . . . .. . . . . . . . . . . . . 2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . .. . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Product Components . . . . . . . . . . . . . . . . . . . . . . . . . 5
Charging the CP-MBC . . . . . . . . . . . . . . . . . .. . . . . . . 6
Powering Devices . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 10
Radio & TV Interference Statement . . . . . . . . . . . . . . . 11

Warranty

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Thank you for purchasing a CyberPower product. To enjoy all the features and benefits of

this Mobile Power Pack, please read and follow all installation and operation instructions.

The charge status of PC- MBC is indicated by the green LED status

indicator. If the green LED is flashing, this indicates that the power pack is

being charged. See the table below for the level of battery status. Continue

charging until the green LED lights up solid and does not flash. This

indicates that the power pack is fully charged.

Use an appropriate USB cable to power devices such as iPods

®

, MP3

players, mobile phones, PDAs and portable gaming systems. Connect the

USB cable to the type A USB powering port on the CP-MBC and the other

end of the cable to the device that you wish to power.

The power status of the CP-MBC Power Pack's available power is indicated

by the orange LED indicators. The level of available power is described in the

following table:

This equipment has been tested and found to comply within the limits for a

Class B digital device, pursuant of Part 15 of the FCC rules. The limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. There

is no guarantee, however, that interference will not occur in a particular

installation.

CyberPower warrants this CP-MBC to be free from defect in material or manufacture for

1 year. If a defect results in product failure during its normal use, CyberPower's sole

responsibility is to repair or replace (at its sole option) the CP-MBC.

The foregoing 1 Year Limited Warranty is the consumer's sole and exclusive remedy

and excludes any incidental or consequential damages. Some States do not allow the

exclusion or limitation of incidental and consequential damages, so certain of the above

limitations or exclusions may not apply to you (the Consumer). This 1 year limited

warranty gives the Consumer specific legal rights and the Consumer may have other

rights, which vary from State to State.

To make a 1 year Limited Warranty claim:

1. Pack and ship the CP-MBC with a dated Proof- of-Purchase receipt to CyberPower at

4241 12th Ave E, Suite 400, Shakopee, MN 55379;

2. Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN;

3. Clearly include your name and address on the outside packaging and on a sheet of

paper enclosed in the box with the CP-MBC that is being returned.

4. You MUST prepay all shipping costs and you are responsible for packaging and

shipment.

CyberPower will inspect and examine the CP-MBC. If the CP-MBC is defective in

material or workmanship, CyberPower will repair or replace it and return it to you at

CyberPower’s expense at the place you have indicated.

Caution

1. Please charge your CP-MBC the first time for a full 8 hours before regular use.

2. When charging the CP-MBC using the AC Adapter or a PC, do not connect any

devices to the type A USB power port. Powering a device while charging the internal

battery will result in a longer charge time for the CP-MBC.

3. Do not charge CP-MBC through a USB hub. Other devices connected to the hub

may reduce the available power and increase the time required to charge the CP-MBC.

Turning On the CP-MBC

Press the power on/off button for 1 second. The orange LED will light up indicating that

the power pack is ready to power a device.

If the CP-MBC is not being used (charging or discharging) after 5 minutes, the orange

LED will automatically turn off. The CP-MBC will switch to sleep mode. To turn the CP-

MBC back on, just press the power on/off button again until the orange LED lights up.

Caution

When both orange & green LEDs light up, this indicates that the power

consumption of the device is greater than 1.2A current. The CP-MBC is

overloaded.

To turn the CP-MBC off, press and hold the power on/off button for 2

seconds.

During Charging

75 ~100%

50 ~75%
25 ~50%

Below 25%

Model No. CP-MBC

CyberPower Mobile Power Pack (CP-MBC) is a rechargeable Power Pack that

is designed for powering mobile devices, iPods

®

, MP3 players, mobile phones,

PDAs and portable gaming systems via the USB Mini-B Cable. CP- MBC is an

ideal travel mate and backup battery that supports and powers devices on the

go.

Features

- Recessed power button prevents accidental start up.

- Auto-shutdown feature protects the CP-MBC from draining.

- High energy-density Lithium-polymer battery.

- Long lasting rechargeable battery with up to 500 cycles.

Package Contents

1. Mobile Power Pack ( CP-MBC)

2. 100-240 Volt AC to 5V USB Transformer

3. USB 2.0 Device Cable

4. User Manual

Before using the CP-MBC, please read the following warnings carefully. Use the product

according to the procedures described in this manual.

Failure to follow these safety

precautions may result in fire, explosion, electrical shock or other dangers.

1. Do not disassemble this product, or any of its parts.

2. Store between -4 to 140°F (-20 to 60°C).Operate between 32 to 113°F(0 to 45°C).

3. Do not immerse this product in water or other liquids, as such use may result in fire or

electrical shock. If water or other liquids enter the battery interior, unplug the product

immediately from any attached power source or device.

4. Do not use this product with wet hands. Moisture in or on this product may result in

electrical shock.

5. Do not expose this product to direct flame or leave it in an over-heated condition, as

the battery may explode.

6. Store this product in a cool and dry environment when not in use.

7. Do not puncture this product. Puncturing the battery may cause the release of harmful

substances.

8. It is normal for the CP-MBC to become warm during charging.

9. Keep this product out of the reach of children. Ensure that all users read these

warnings and instructions before using.

Prior to Use

NOTE: Charge the CP-MBC for a full eight (8) hours prior to using for the first time.

Orange LED Status Indication

Light

Flashing 3 sec
Flashing 2 sec

Flashing Fast

LED off

Green LED Status Indication

Light

Flashing 3 sec
Flashing 2 sec

Flashing Fast

Available Power

75 ~100%

50 ~75%
25 ~50%

Below 25%

Fully Depleted

Problem

CP-MBC does not

power the device.

CP-MBC does not

charge.

Possible Cause

1. The CP-MBC may

have switched to Auto

Sleep Mode.

2. The power of device is

over SPEC (5V, 1.2A).

3. The battery is out of

power.

1. Incorrect connection

between charger and

CP- MBC product.

2. No power source from

outlet.

Solution

1. Press the power on/off

button for 1 second to wake

the CP-MBC.

2. Check the power

specification of the device

before charging with the

CP-MBC.

3. Charge the CP-MBC

using one of the two

methods that are described

under "Charging the

CP-MBC" in this user's

manual.
1. Mini B port on the CP-

MBC is for charging.

2. Checking the wall outlet.

A Type Port

Mini B Charging Port

Connect the included AC

transformer or USB cable to

charge the battery.

Power On/Off

Press the button momentarily

to turn on or off the unit.

Green LED

Charge indicator LED

Orange LED

Power indicator LED

Power on/off indicator

Powering Port

Use the included USB cable

to power your device.

Option 1.

mini B Port

Option 2.

mini B Port

A Type Connector

Input Voltage Range

Input Power Source

On Battery Output Voltage Range

On Battery Output Maximum Current

On PC USB Port Maximum Current

On AC Adapter Output Maximum Current

Capacity

Output Power

Powering Indication

Capacity Indication

Charge time

Size

Weight

Environmental

5V

Charge using included AC transformer or

upstream USB port.

5V +/-5%

1.2A

500mA

1A

6 Watt-hours

5 Watt Maximum Continuous Power
6 Watt Peak Power - Short Duration

Orange LED

Green LED

Recharges to 100% in 3.5 hours

4.06 x 2.36 x 0.58 in

3.264 OZ

Storage: -4 to 140°F (-20 to 60°C)

Operation: 32 to 113°F(0 to 45°C)

Charging the CP-MBC

6

You can charge the CP-MBC using any of following methods:

Option 1- Using the AC Power Adapter: Use the included AC power adapter to

charge the CP-MBC. Plug the adapter into a wall outlet and connect the Mini-

B port to the CP-MBC.

Option 2- Using Your Notebook or PC: Charge the CP-MBC through your

notebook or desktop PC. Use the included USB 2.0 Device cable, connect

mini-B port to the CP-MBC and connect A-type port to a Notebook or PC.

CyberPower Systems (USA), Inc.

4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.

TEL: (952) 403-9500 FAX: (952) 403-0009 Toll-Free: (877) 297-6937

E-mail: [email protected] Web: www.CPSww.com

Entire contents copyright

C

2008 CyberPower Systems, Inc.

All rights reserved. Reproduction in whole or in part without permission is prohibited.