Curtis TID991 - Manual

Curtis TID991 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Location of Controls; Plug the other end of the cord into the wall jack.; Note: If you want to reset the Press and hold [; at the same time, all of the present setting will be cleaned.
Page 3 – Erasing data from the caller ID list
Page 4 – In Use Indicator; Get a new dial tone and press REDIAL button.; Flash Time Selectable
Page 5 – You may select the flash time by following steps:; To Store 10 Two-Touch Dialing Memories; number; To Dial 10 Two-Touch Dialing Memories; the number; Number of Repeat Call
Page 6 – IMPORTANT SAFETY INSTRUCTIONS; SAVE THESE INSTRUCTIONS

Loading the manual

OWNER'S MANUAL

AND

OPERATING INSTRUCTIONS

FEATURES:

• Up to 99 Message Memories
• English/Spanish/French Selectable
• Name and Number Display
• Redial The Displayed Number
• Date and Time Stamp
• Real Time Clock
• 6 Levels of LCD Contrast Adjustment
• 3 One-touch Dialing Memories
• 10 Two-touch Dialing Memories
• Ringer Volume (HI/LO/OFF) Selectable
• Speakerphone Volume Control (Max to Min)
• Tone/Pulse Switchable
• Flash Time Selectable
• Mute Function
• Low Battery Indicator

TID991

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Location of Controls; Plug the other end of the cord into the wall jack.; Note: If you want to reset the Press and hold [; at the same time, all of the present setting will be cleaned.

Location of Controls DATA JACKIt can let you connect to PC or Fax machine. WALL MOUNTING ON A TELEPHONE WALL PLATE• The telephone can be mounted on a wall phone plate. (Fig .1) • When the telephone is mounted on the wall, the reversible handset holder mustbe adjusted so it will hold the handset. • A...

Page 3 - Erasing data from the caller ID list

DESCRIPTION OF DISPLAYING A. 3 line LCD displaying, upper line displays the basic information, middle line displays the number of in-coming call and bottom line displays thename of caller • "NEW" appears when there are new incoming calls • "CALL #" means the total amount of incoming ...

Page 4 - In Use Indicator; Get a new dial tone and press REDIAL button.; Flash Time Selectable

To erase one stored number at a time1. Press [ ▲ ] and [ ▼ ] button to select the data 2. Press [DEL] twice continuously and the displayed data will be erased.If you press [DEL] for more than 6 seconds, the entire list will be deleted. Calling back a number from the caller ID list- Press [ ▲ ] and [...