Cornelius 620053923 - Manual
Cornelius 620053923 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – The Parts shown in Table 3 are NOT Used for this Installation:; Figure 8; Table 3; Icemaker Rear Mounting Plate
- Page 6 – – IDC S; The Parts shown in Table 4 are NOT Used for this Installation:; of the bracket must be over the adapter lid, as shown in Figure 4.; Table 4
- Page 7 – The Parts shown in Table 5 are NOT Used for this Installation:; Table 5
Icemaker & Adaptor Hold-Down Kit Installation Instructions
© 2008, IMI Cornelius Inc.
- 1 -
Publication Number: 629096853INS
INSTALLATION INSTRUCTIONS
I
CEMAKER
AND
A
DAPTER
H
OLD
-D
OWN
K
IT
P/N 629096853
F
OR
F
LAVOR
F
USION
/ IDC
UNITS
O
NLY
Instructions for Non-30 Inch Wide Icemaker – Flavor Fusion Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Instructions for 30 Inch Wide Icemakers – Flavor Fusion Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Instructions for Non-30 Inch Wide Icemaker – IDC Series Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Instructions for 30 Inch Wide Icemaker – IDC Series Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Parts Included in the Kit are Shown in Table 1:
Tools Needed:
• Power Drill
• 9/64 in. (.140 in.) Drill Bit
• #2 Phillips Head Screwdriver
I
NSTRUCTIONS
FOR
N
ON
-30 I
NCH
W
IDE
I
CEMAKER
– F
LAVOR
F
USION
U
NITS
WARNING:
Failure to follow the installation instructions correctly may result in equipment damage
and/or personal injury.
The Parts shown in Table 2 are NOT Used for this Installation:
1.
Remove the two top black side panel screws from both sides of the Flavor Fusion unit (See Figure 1) and
save the screws.
Table 1
Part No.
Description
Qty.
22127
Icemaker Rear Mounting Plate
2
50904
Silicone sealant
1 tube
620053922
Left Side Adapter Hold-Down Bracket
1
620053923
Right Side Adapter Hold-Down Bracket
1
620518916
Adaptor/Icemaker Side Hold-Down Plate (Flat)
2
620701601
#10-16 S.S. Sheetmetal Screws
12
Table 2
Part No.
Description
Qty.
620518916
Adaptor/Icemaker Side Hold-Down Plate (Flat)
2
Release Date: June 30, 2008
www.cornelius.com
Revision: 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Icemaker & Adaptor Hold-Down Kit Installation Instructions Publication Number: 629096853INS - 4 - © 2008, IMI Cornelius Inc. CAUTION: Be careful not to drill too deep and/or too fast into the icemaker base and dispenser wrapper as damage may occur to unseen parts. Figure 7 9. Install the second ...
Icemaker & Adaptor Hold-Down Kit Installation Instructions Publication Number: 629096853INS - 6 - © 2008, IMI Cornelius Inc. Figure 12 7. Using the supplied sheetmetal screws, screw four (4) screws per plate into the dispenser wrapper and icemaker base. 8. Repeat Steps 2 through 7 on the other s...
Icemaker & Adaptor Hold-Down Kit Installation Instructions © 2008, IMI Cornelius Inc. - 7 - Publication Number: 629096853INS 4. Using supplied sheetmetal screws, screw two (2) screws per bracket into the dispenser wrapper, as shown in Figure 14. Figure 14 5. Repeat Steps 1 through 4 for the oppo...
