Cornelius ED 300 BN - Manuals

Page 2 - TABLE OF CONTENTS

i 620913202 TABLE OF CONTENTS Page SAFETY PRECAUTIONS 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIFICATIONS 1...

Page 3 - SAFETY PRECAUTIONS; Never; Dispenser cannot be used with crushed or flaked ice.; DESCRIPTION; SPECIFICATIONS

1 620913202 SAFETY PRECAUTIONS Always: disconnect power to the dispenser before servicing or cleaning. Never : place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator rota- tion occurs automatically when dispenser is energized! This ice dispenser has been spe...

Page 4 - INSTALLATION INSTRUCTIONS; All drain connections

2 620913202 INSTALLATION INSTRUCTIONS IMPORTANT: It is the responsibility of the Installer to ensure that the water supply to the dispensing equipment is provided with protection against backflow by an air gap as defined in ANSI/ASME A112 1.2-1979; or an approved vacuum breaker or other such method ...

Page 5 - FIGURE 1. INSTALLATION DIMENSIONS

3 620913202 8 1/2 REMOVABLE SERVICE PANEL FOR ACCESS TO E-BOX AND ICE GATE MECHANISMS E--BOX SOLENOID ICEMAKER 44 1/2 44 3/8 WALL FRONT OF ICEMAKER 30 5/8 36 1/4 33 STAND 31 1/2 21 1/4 29 3/4 23 FOUNTAIN CUTOUT 1/4 36 WALL LOWER FOUNTAIN FIGURE 1. INSTALLATION DIMENSIONS

Page 6 - FIGURE 2. INSTALLATION REAR VIEW

4 620913202 SIDE REMOVABLE COVER(S) FOR AGITATOR (2) ACCESS AND MANUAL FILLING OF ICE STORAGE BIN TYPICAL INSTALLATION FOR SINGLE ICEMAKER FOAMED HOPPER HOPPER DRAIN TUBING (5/8 I.D.) 2 PLACES LOWER FOUNTAIN WALL 36-IN. HIGH 15 13/16 19 7/16 ACCESS PANEL 15-IN. X 15-IN. OPENING 3 1/2 2 1/4 ACCESS PA...

Page 7 - FIGURE 3. MOUNTING TEMPLATE

5 620913202 44 3/8 40 3/4 1 13/16 20 3/8 14 TYP. 4 TYP. 1 5/16 18 5/8 OPENING OPENING 1 4 1/2 21 1/4 29 3/4 31 1/2 REMOVABLE DRIP TRAY 7/16 DIA. (6) PLCS TO FRONT OF DRIP TRAY ON COUNTER TOP TO FRONT TOP OF DRIP TRAY OPENING (2) IN UNIT BASE FOR BEVERAGE AND WATER MANIFOLD INLET LINES, HOPPER DRAIN ...

Page 10 - MAINTENANCE; GATE RESTRICTOR PLATE; ADJUSTMENT

8 620913202 MAINTENANCE GATE RESTRICTOR PLATE CAUTION: Disconnect power to dispenser before installing, removing or adjusting restrictor. FIGURE 6. GATE RESTRICTOR PLATE ADJUSTMENT This plate may be adjusted as shown to reduce or increase with large containers the dispensing rate of ice, es- peciall...

Page 11 - FIGURE 7. AGITATOR REMOVAL AND REPLACEMENT; REMOVAL AND REPLACEMENT OF AGITATORS

9 620913202 LEFT HAND AGITATOR O-RING RIGHT HAND AGITATOR WITH HOLE IN UPRIGHT COUNTER CLOCKWISE ROTATION CLOCKWISE ROTATION FRONT (VALVE SIDE) VIEW FROM TOP OF DISPENSER FIGURE 7. AGITATOR REMOVAL AND REPLACEMENT REMOVAL AND REPLACEMENT OF AGITATORS Remove agitators for cleaning as follows: 1. Lift...

Page 12 - TROUBLESHOOTING

10 620913202 WARNING: If repairs are to be made to a product system, remove quick disconnects from the applicable product tank, then relieve the system pressure before proceeding. If repairs are to be made to the CO 2 system, stop dispensing, shut off the CO 2 supply, then relieve the system pressur...

Page 16 - WARRANTY; equipment model number, serial number and the date of purchase.

SD 99-3 14 620913202 WARRANTY IMI Cornelius Inc. warrants that all equipment and parts are free from defects in material and workmanship un- der normal use and service. For a copy of the warranty applicable to your Cornelius, Remcor or Wilshire prod- uct, in your country, please write, fax or teleph...