Cooper Lighting P2R - Manual
Cooper Lighting P2R – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Cover plate
1/4-20 x4"
(2x)
Exploded view and part call-out
Hex bolt
Canopy
(2x)
Wiring the fixture
. Replace canopy and secure using both set screws.
(2x)
Set screw
Fixture head
#8-32 x3/8"
assembly
1.
Remove both 1/4-20 x4 hex bolts from bottom of pendant.
2.
Remove both #8-32 x3/8" set screws and allow canopy to
slide down pendant.
3.
Run wires from J-box into pendant, ensure there is enough
wire to reach cover plate.
4.
Using appropriate fasteners, secure fixture to ceiling.
Use
additional bracing around J-box to support fixture.
5
Aiming the fixture
Attention:
Large fixtures require additional bracing/structure
around J-box to support fixture.
Secure cover plate
1/4-20 x4
1.
(2x)
Hex bolts
properly matched
Slide fixture assembly onto pendant and secure with both
Attach appropriate wires and ensure all connections are
1/4-20 x4 hex bolts.
2.
Cover plate
3.
1.
To aim fixtures, loosen both #10-32 end screws on
one
fixture. When both indicators are lined up, the slope of the
lens face is 40-degrees. Each subsequent notch is an
additional +/- 10-degrees.
2.
When fixture head is rotated to the desired angle, retighten
end screws to secure the position.
3.
Repeat for second fixture head.
Fixture head
indicator
indicator
Yoke arm
#10-32
End screw
Mounting pendant to ceiling
Cover plate
#8-32 x3/8"
(by others)
J-box
3/8" fasteners
(by others)
Canopy
Set screw
(2x)
1/4-20 x4
Hex bolts
(2x)
These installation instructions are valid with the above Ametrix styles.
Sheet 1 of 3
that all sources of power are turned off. All
1
Visor and Non-Visor
3
Warning
2
performed by a certified electrician.
: Before starting any work ensure
work must meet local/national codes and be
Do not
mount fixtures vertically.
Installation Instructions
Vault
C-Scroll
Roundel
Large, INDOOR
P2R
(P
endant
, 2
-way
, R
emote ballast
)
ADY071471 REV A(ECN070347)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
