Cooper Lighting M2N-E SLI - Manual
Cooper Lighting M2N-E SLI – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
2.
Visor and Non-Visor
Do not
performed by a certified electrician.
work must meet local/national codes and be
Warning
: Before starting any work ensure
that all sources of power are turned off. All
mount fixtures vertically.
Installation Instructions
1.
Sheet 1 of 3
Roundel, XL
IN/OUTDOOR
P1R
(P
endant
, 1
-way
, R
emote
)
ADY080866 REV A(ECN080377)
Hex end bolt
All extra large fixtures require additional bracing/structure around J-box to support fixture.
End cap
3/8-16x1"
(by others)
Mounting plate
J-box
Canopy
dependant on order
Pendant length
plate
1-way Yoke
Yoke arms
Fixture door
Electrical cover
Exploded View and Part Call-Out
(x2)
Securing Pendant to Structure in Ceiling
(x2)
Hex bolt
Securing Yoke to Pendant
Attention:
spacer
Aiming screw
1/4-20 x 4"
1/4-20 x1"
Aiming screw
(x2)
1/4-20 x1"
Button socket screws
(x4)
yoke.
and secure using both 1/4-20 x 4" hex bolts.
After securing arms, slide 1-way yoke assembly onto pendant
2.
Yoke arms
Using all four 1/4-20 x1" screws, secure yoke arms to 1-way
yoke
1-way
1.
1/4-20 x 4"
Hex bolt
(x2)
Pan head screws
#10-32 x 1/2"
(x2)
(by others)
J-box
plate
Mounting
(by others)
Canopy
Appropriate fasteners
1.
Loosen both #10-32 x1/2" Pan head screws and allow canopy
to slide down pendant.
2.
Feed power wire from j-box into pendant, ensure wire reaches
electrical cover plate on base of pendant.
3.
Using appropriate fasteners(by others), secure mounting plate
to structure/bracing around J-box.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
