Cooper Lighting J/E-PSW-FX-02 - Manual
Cooper Lighting J/E-PSW-FX-02 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
#8-32 x3/8"
Hex bolt
Exploded view and part call-out
(2x)
Fixture head
. Replace canopy and secure using both set screws.
Set screw
(2x)
1/4-20 x4"
Canopy
(2x)
Wiring the fixture
assembly
Cover plate
1.
Remove both 1/4-20 x4 hex bolts from bottom of pendant.
2.
Remove both #8-32 x3/8" set screws and allow canopy to
slide down pendant.
3.
Run wires from J-box into pendant, ensure there is enough
wire to reach cover plate.
4.
Using appropriate fasteners, secure fixture to ceiling. Use
additional bracing if necessary.
5
Sealing the fixture
Attention:
Large fixtures require additional bracing/structure
around J-box to support fixture.
(by others)
J-box
3/8" fasteners
(by others)
Set screw
(2x)
Canopy
Cover plate
#8-32 x3/8"
1/4-20 x4
Hex bolts
(2x)
(2x)
properly matched
Hex bolts
Slide fixture assembly onto pendant and secure with both
1.
Secure cover plate
1/4-20 x4
Cover plate
3.
2.
Attach appropriate wires and ensure all connections are
1/4-20 x4 hex bolts.
1.
To seal fixture, ensure door is secured with provided socket
cap screws. Secure #6-32 x1/2" socket cap screws above door
latches.
2.
Secure #6-32 x5/8" socket cap screws into bottom of door.
3.
Refer to supplementary sheets for torque specs and aiming
instructions.
Securing pendant to ceiling
(3x)
Socket cap screws
#8-32 x1/2"
(2x)
(2x)
Socket cap screws
#8-32 x5/8"
Cover plate
gasket
Wire seal
1
Visor and Non-Visor
performed by a certified electrician.
3
Warning
2
that all sources of power are turned off. All
Sheet 1 of 3
: Before starting any work ensure
work must meet local/national codes and be
Do not
mount fixtures vertically.
Installation Instructions
Vault
C-Scroll
Roundel
These installation instructions are valid with the above Ametrix styles.
Large, OUTDOOR
P2R
(P
endant
, 2
-way
, R
emote ballast
)
ADY071474 REV A(ECN070347)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
