Cooper Lighting EYELITE 12" - Manual

Catalog #

Project

Comments

Prepared by

Type

Date

SPECIFICATION FEATURES

04/10/2007 2:42:06 PM

Consult your representative for additional options and finishes.

Specifications and Dimensions subject to change without notice.

ADC041340

DESCRIPTION

The Harmony EyeLite combines exceptional aesthetics with remarkable
strength. Die-cast, extra-heavy aluminum walls of the front/back housings
offer rugged durability and afford efficient heat dissipation. Lens is
fashioned from high-quality, tempered borosilicate glass. Linear prisms
provide an efficient forward throw and broad coverage. Performance-
crafted, faceted, specular aluminum reflector maximizes efficient light
distribution. A liquid injection-molded silicone gasket allows a tight seal
between the housing and lens assembly. EyeLite is listed for wet locations
in all mounting positions; a 9° tilt allows water runoff when inverted.

Application

This handsome fixture will blend
seamlessly into virtually any
unsupervised environment where
broad, low-glare light distribution
is esthetically pleasing and security
essential: shopping centers,
roadside malls, corporate building
exteriors or transportation stations.

Lens

Molded, tempered, shock-resistant
borosilicate glass is 0.225 inches
thick and floats on gasket.
Dissipates heat and is unaffected
by UV light, pollution and cleaning
solutions. Relamping hook holds
lens assembly for easier
maintenance. Chroma lens is
molded glass, sealed with gasket.
Consult factory for colors.

Optics

Linear elevating prisms create an
IES Type-III short distribution,
providing broad coverage. Faceted,
specular aluminum reflector (94%
TR) maximizes light output.

Surface Housing

Front/back housings are precision
TruGen die-cast for superior
strength and product uniformity.
Marine-grade, low-copper-alloy
aluminum resists corrosion.
Extra-heavy thickness promotes
durability and assures an efficient
heat sink for internal components.

Regressed Housing

Cast housing is nominal .125"
thick, marine grade, low copper
alloy aluminum. Comes with
concealed cast aluminum plate to
seal regressed housing to front
lens face. Two back-box
configurations are available
depending on installation. The BB
option is for stud wall and other
combustible material applications
and comes with adjustable
brackets for 18" to 24" on center
spacing.

Regressed Housing Cont.

The CP option is for concrete pour
and other non-combustible
material applications and comes
with an adjustable bracket to
accommodate variable wall
thickness. A quick-connect plug
wiring system allows for easy
installation. Back box may be
shipped separately for early
installation (see REGRESSED
HOUSING MOUNTING AND
ADVANCED ORDERING
INFORMATION). Wall mount only.

Gaskets

Long-life, injection-molded silicone
gasket promotes water- and
dust-tight seal between housing
and front-lens assembly.
1/8-inch-thick, closed-cell EDPM
gasket facilitates proper seal
between luminaire and mounting
surface. No additional caulking is
required.

Lamp

(by others)

Socket

HID socket is a 4KV rated porcelain
medium-base socket with a
nickel-plated brass screw shell. CFL
socket incorporates 26-watt
GX24q3; 32-watt GX24q3; or
42-watt GX24q4 base with
stainless-steel retention clip and a
2-pin reject that ensures proper
lamping and lamp retention.
Fluorescent socket is
polycarbonate.

Ballast

CFL ballasts are electronic
universal voltage 120-277V, less
than 10% harmonic distortion with
minimum starting temperature of
-18°C (0°F). HID ballasts are
standard HPF core & coil with
minimum starting temperatures of
-40°C (-40°F) for HPS and -30°C
(-20°F) for MH.

Fasteners

Four stainless-steel TORX® screws
with center reject pin. Screw heads
are recessed into casting to
maximize tamper-resistance.
Sealed with a gasket, fasteners are
captive.

Finish

Finish is TGIC, textured, thermoset
polyester-powdercoat that is
applied in five-stage process at
2.0-mil thickness and baked on at
400° F. Finish is 500-hour-salt-
spray test-rated and has an impact
rating of 160 inch/pounds.

Labels

CUL wet-listed for wall and ceiling.

EYELITE 12"

Harmony(TM)

26W - 42W

Compact Fluorescent

50W - 100W

High Pressure Sodium

Metal Halide

EFS-12, ERS-12,
ELS- 12, ENR-12

50W-100W HPS/MH
26W-42W CT

EFR-12, ERR-12,
ELR- 12, ENR-12

50W-70W HPS/MH
26W-32W CT

12”dia.

305mm

8.875"

225mm

10”

254mm

12" dia.

305 mm

8“

204mm

3.75"

95mm

4"

102mm

F A I L - S A F E

®