Cooper Lighting ADY080112 - Manual
Cooper Lighting ADY080112 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
(x2)
Pan head screws
Additional bracing/ structure may be required to support fixture.
(x4)
(by others)
Appropriate fasteners
Attention:
Exploded View and Part Call-out
Integral Shroud
(wedge)
J-box gasket
Mounting plate
J-box
(by others)
Fixture and ballast
assembly
Preparing Fixture for Mounting
#10-32 x 1/2"
#10-32 x 1/2"
Pan head screws
(x3)
Installing Mounting Plate
mounting plate over j-box using appropriate
Gasket
Using dimensions provided on page 3, install
fasteners(by others).
J-box
(by others)
2.
Ensure gasket seals J-box.
1.
Mounting
plate
ȱȱȱȱ ȱȱȱǯȱȱȱ
ȱȱȱȦȱȱȱȱ
ȱŗȱȱř
Ř
ADY080112 REV A(ECN080444)
DZȱȱȱȱ¢ȱ ȱȱ
ȱ¢ȱȱȱǯ
ȱ
ȱȱŖŗ
ȱȱŖŘ
ȱȱŖř
ȱȱȱȱ ȱȱȱ¡ȱ¢ǯ
ŗ
22 1/2"
Large, OUTDOOR
SSIxx
(Shroud, Integral)
#10-32 x 1/2"
(x3)
Pan head screws
safe place.
Pull fixture from mounting plate and store in a
3.
enclosure.
x 1/2" Pan head screws from behind ballast
#10-32 x 1/2"
Pan head screws
(x2)
1.
To mount fixture, begin by removing both #10-32
x 5/8" pan head screws and remove shroud.
2.
While supporting fixture, remove all three #10-32
Ballast
enclosure
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
