Cooper Lighting ADY071473 - Manual
Cooper Lighting ADY071473 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Vault
1
Sheet 1 of 3
C-Scroll
3
Roundel
2
These installation instructions are valid with the above Ametrix styles.
Visor and Non-Visor
Warning
that all sources of power are turned off. All
performed by a certified electrician.
: Before starting any work ensure
work must meet local/national codes and be
Do not
mount fixtures vertically.
Installation Instructions
Large, OUTDOOR
P1R
(P
endant
, 1
-way
, R
emote ballast
)
ADY071473 REV A(ECN070347)
(2x)
Mounting and wiring fixture
Mounting plate
#10-32 x 3/8"
Canopy
Hex cap screw
(2x)
1/4-20x 3/4"
(2x)
End screw
Exploded view and part call-out
Pan head screw
#10-32
Appropriate fasteners
(by others)
(2x)
Sealing the fixture
Securing fixture to pendant
(2x)
Socket cap screw
#6-32 x 5/8"
#6-32 x 1/2"
Wire seal
Socket cap screw
1.
To seal fixture, secure all socket cap screws according to
sequence and torque specifications on supplementry sheet.
2.
Ensure a smooth and sealed connection at wire seal.
3.
For aiming instructions refer to aiming supplementry sheet
3.
Mount yoke to pendant with both 1/4-20 Hex cap screws.
Hex cap screw
Wire connector
End screw
Flat head screw
End cap
Yoke
1/4-20 x 3/4"
Mounting plate
#6-32 x 1/4"
(2x)
mounting plate and reattach fixture head to yoke.
Feed fixture wire through connector in pendant up through
(2x)
1.
Begin by removing end screw, #6-32 x 1/4" Flat head screw
and end cap from one side of Yoke and remove fixture head.
2.
Fixture wire
#6-32 x 3/8"
(2x)
Replace canopy and secure with both #6-32 x3/8" Pan head
screws.
Attach appropriate wires and ensure all connections are
Attention:
Large fixtures require additional bracing/structure
around J-box to support fixture.
4.
J-box
(by others)
Canopy
properly matched.
Pan head screws
1.
Loosen #6-32x 3/8" Pan head screws and allow canopy to slide
down pendant.
2.
Feed wires from J-box through wire ways in mounting plate
and secure fixture to bracing around J-box.
3.
Use additional bracing
around J-box to support
fixture.
Appropriate
fasteners
(by others)
(4x)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
