Cooper Lighting ADY071468 - Manual
Cooper Lighting ADY071468 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Set screws
#10-32 x3/8"
(2x)
Wiring the fixture
(8x)
Pan head screws
Canopy
(2x)
Sealing the fixture
#8-32 x3/8"
1/4-20 x2 3/4"
Hex bolt
Attention:
Dual fixture assemblies require additional bracing/structure
around J-box to support fixture.
Pan head screws
#8-32 x3/8"
Hex bolts
(x8)
(x2)
1/4-20 x2 3/4"
Cover plate
1.
Slide fixture assembly onto pendant and secure with both 1/4-
20 x.2 3/4" hex bolts.
2.
Remove cover plate on bottom of fixture assembly.
3.
Attach appropriate wires and ensure all connections are
properly matched.
4.
Secure cover plate with eight #8-32 x3/8" pan head screws.
Exploded view and part call-out
1/4-20 x 2 3/4"
Hex bolt
Securing Fixture to Ceiling
fixture
around J-box to support
(by others)
J-box
Set Screw
(2X)
(2X)
#10-32 x3/8"
Canopy
Use additional bracing
1/4" fasteners
(by others)
(4X)
1. Remove both 1/4-20 x 2 3/4" hex bolts from bottom of
pendant.
2. Remove both #10-32 x 3/8" set screws and allow canopy to
slide down pendant.
3. Run wires from J-box into pendant, ensure there is enough
wire to reach cover plate on bottom of fixture assembly.
4. Using appropriate fasteners, secure fixture to ceiling.
Use
additional bracing around J-box to support fixture.
5. Replace canopy and secure using both set screws.
3
Warning
2
that all sources of power are turned off. All
Sheet 1 of 2
performed by a certified electrician.
Visor and Non-Visor
: Before starting any work ensure
work must meet local/national codes and be
Do not
mount fixtures vertically.
Installation Instructions
Vault
C-Scroll
Roundel
These installation instructions are valid with the above Ametrix styles.
1
Small, OUTDOOR
P2R
(P
endant
, 2
-way
, R
emote ballast
)
ADY071468 REV B(ECN80481)
Socket cap screw
(2x)
Socket cap screw
#6-32 x1/2"
#6-32 x5/8"
1.
To seal fixture, ensure door is secured with provided socket
cap screws. Secure #6-32 x1/2" socket cap screws above door
latches.
2.
Secure #6-32 x5/8" socket cap screw into center of door.
3.
Refer to supplementary sheets for torque specs and aiming
instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
